NXP IMX USDHC fallback card detection method changed from querying the
peripheral to simply assuming the card was present. Add a note to the
migration guide highlighting this and explaining how to restore the
previous behavior for anyone using this detection method.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The imx USDHC driver previously queried the peripheral's internal card
detect signal to check card presence if no card detect method was
configured. However, some boards do not route the card detect signal and
do not work correctly with the DAT3 detection method supported by this
peripheral. As a fallback, assume the card is present in the slot but
log a warning to the user.
Fixes#42227
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Modify the condition in the parse_testplan
function to align with the changes in the Status class.
Signed-off-by: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com>
Updated the clocks that get initialized for the MCXN947
when using the LPTMR. The LPTMR allows the user to select
and Input clock, however said input clock must be
initialized before the user can select it.
Update description for clk-source in binding file.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Move default of monolithic and fw loader, options, etc to the
common kconfig files rather than defaulting in soc file.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Consolidate the ROM RAMLOADER config to be in one place,
add a new Kconfig file to be included by the SOCs with the feature.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The CONFIG_USB_MCUX_CONTROLLER_TYPE choice config
is not necessary, let's just remove it. Theoretically,
if there was an SOC with the EHCI and LPCIP3511, then
it might cause a build error, but there is no SOC
which is supported on this legacy driver that has that.
Remove all settings of it in the SOC files.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Currently this code related to how to configure the
flash size and address when using flexspi to XIP is copy
pasted in all sort of places and ways all over the tree,
let's clean this up and have single point of control over
this configuration.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Move all dependencies of the family config to series level,
and put a disclaimer saying not to use the family config.
Change all occurrences of the family config in code to the
MCXNX4X series config.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Some flash/memc drivers like flexspi will want to default the
value of the log level to off to avoid RWW hazard while XIP,
to do this, the logging template must be sourced after the driver
kconfig files so that the default value from the driver is able
to be checked, since logging template introduces an unconditional
default otherwise.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
NXP is not supporting these derivative parts in the zephyr upstream,
these references to them should therefore be removed in order to avoid
confusion.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The Kconfig defaults should be in Kconfig.defconfig.
MFD should not be made dependent on the LP flexcomm being
enabled, since MFD can be for other things than just flexcomm.
Change from depends on to an if.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Doesn't seem like there is any reason to be changing the
serial and ADC driver init priorities in the SOC defconfigs.
By default, clock control has priority 30, dma has priority 40,
and serial/adc have priority 50. This seems already to be the order
that is needed, and the original goal of these overrides, which
don't seem necessary anymore.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
There are some SOCs which use the same pinctrl
device, but are not really overall that similar to the kinetis
family of SOCs, so prepare to reuse this code by other SOC families.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Moving RT118x kconfigs to series level instead of family level,
and cleaning up redundant declarations, and adding missing
HAS_MCUX_FLEXSPI selection.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Introduced `GPIO_DEVICE_INIT_RA_IF_OKAY` which utilizes `COND_CODE_1`
to reduce the chain of #if DT_NODE_HAS_STATUS(...) #endif
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Refactor the guidelines rule table and add a zephyr rule number
to make it more clear that the coding guideline rules are a
subset of the MISRA-C:2012 rules.
Signed-off-by: Simon Hein <Shein@baumer.com>
Build was failing due to const variable being passed as function param
accepting non-const variable discarding const qualifier. Explicitly cast
to fix the build issue.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The ESAI is already reset during the config_set() function
so no need to also reset it during init().
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The reset pin on the chip is optional, add a soft reset call when the
reset pin is not specified for the device.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Implemented the following:
- `asctime_r()`
- `asctime()`
- `localtime()`
- `localtime_r()`
- `ctime()`
- `ctime_r()`
Specifically:
- the implementation of `localtime()` & `localtime_r()` simply
wraps around the gmtime() & gmtime_r() functions, the
results are always expressed as UTC.
- `ctime()` is equivalent to `asctime(localtime(clock))`, it
inherits the limitation of `localtime()` as well, which only
supports UTC results currently.
Added tests for these newly implemented functions.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
`readdir_r()` belongs to the following option group
POSIX_FILE_SYSTEM_R: Thread-Safe File System
Create a new Kconfig `CONFIG_POSIX_FILE_SYSTEM_R` to compile
it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Add minimum support for the `west sdk` command.
This only provides completion for the `sdk` command itself.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
This command can list and install SDK.
Run 'west sdk install' to install the SDK.
Run without any parameter, installing
specified by SDK_VERSION in the source tree.
'west sdk' to show installed SDK information.
This command is just a wrapper for SDK's setup command,
but it simplifies the installation process. It will be a good
improvement for onboarding first-time users.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Removes calling k_busy_wait() and uses k_msleep().
Updates polling rate of EEPROM busy status after read request to 1 ms, as
recommended by the app note.
Signed-off-by: Jakub Topic <jakub.topic@anitra.cz>
The tests manually include sources that are normally conditionally
included (ie based on kconfig values) in the stack.
The tests should be fixed by the original authors.
For now, force-on the hidden kconfig that enables the log options.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
`OTS_CLIENT=y` and `OTS=n` is a valid config.
Since the logs weren't conditionally included, this flew under the radar
for a while.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
- got rid of "Others" menu
- JK I made a new one: "Common"
- moved all host-related opts to "Host" instead of "Others"
- moved all audio-related opts behind `if BT_AUDIO`
- moved only controller kconfig to controller/Kconfig.ll_sw_split
- it had a dependency there already
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Having all the configs be visible by default clutters the menuconfig
view. Make them visible only when the corresponding subsys or module is
enabled.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Commit 698a0c3193 changed the bluetooth_api
section title, which made the reference in the Coding guidelines turn into
"API", which is confusing.
Use a fixed title for that reference to fix the issue.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
There was hardcoded value for user_data which is no longer valid.
Use proper CONFIG_BT_CONN_TX_USER_DATA_SIZE for that.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v2.6
Requires https://github.com/zephyrproject-rtos/hal_st/pull/21
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Fix warnings generated when performing sensor drivers build test
due to typos in i2c DT definition.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
All the network related shell activities should be under
network shell so moving it to "net bridge ..." command.
Add this information to migration guide.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Remove the references to the breathe extension in the
Schematic of the documentation build process graph and
the filtering expected warnings section.
Signed-off-by: Simon Hein <Shein@baumer.com>
