It might happen that while we are waiting for the response
to one of our query, we receive a query to resolve another name.
Previously this would make the current name resolution to fail because
only responses were expected to be received.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
Clarify that number of bytes_written means bytes number of bytes
written belongs to the user's payload.
Added API note for emphasize that any flush write should be
the last write operation in any writes row.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
stream_flash_bytes_written() returned number o bytes physically
written to the flash. This number might be bigger than the requested
number as is aligned to the device write-block-size.
stream_flash_bytes_written() should return number of bytes
written requested by the user.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
iProc PCIe EP IP is present in Broadcom PCIe offload chips.
Add iProc PCIe EP driver to provide basic PCIe EP functionality.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Signed-off-by: Shivaraj Shetty <shivaraj.shetty@broadcom.com>
Introduce common API to achieve data transfer using memcpy
to/from outbound region of PCIe EP.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Add public APIs for PCIe endpoint driver:
- EP configuration space read/write
- Mapping/Unmapping of Host buffer and PCIe outbound region
- Raise interrupt to Host
These are minimal base APIs to make PCIe EP functional.
Also, add a Kconfig and an empty CMakeLists.txt for drivers to extend.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
This helps distingush between fatal errors if logging isn't
enabled.
As detailed in comments, pass a reason code which controls
the QEMU process' return value.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For some reason GCC 9.x doesn't seem to be able to realize that set_num
will always be > 0 and so the local variable status will always be
initialized. Use a do {} while instead to keep it happy.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
tested on mimxrt1060_evt
MEMORY_NOCACHE is needed
test on frdmk64f
special test slot need configure with
CONFIG_DMA_TEST_SLOT_START
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
1. expand PERIPHERAL_TO_PERIPHERAL
2. add slot size to 128 as i.MX-rt has 127 slot
3. add link_channel member in dma_conf which is used to
support chain channel
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
for RT series CONFIG_NOCACHE_MEMORY need enabled
for Kinetis series CONFIG_DMA_TEST_SLOT_START for test
modify the target and dest alignment
frdmk64f need replace strlen to sizeof in irq callback
clean the unused receive buffer, so output is tidy
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Fixes: #26096
In some cases DTC may be installed, but in a non-working state.
In such cases, CMake will abort processing with an cryptic error.
This commit now handles dtc version errors and print a warning., and
CMake processing continues.
dtc is an optional component and failures should not break CMake run.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
mqtt_utf8 structure is used to store the client_id, user_name, password,
topic, will_message.
There is no reason for the mqtt code to modify such data, therefore we
can constify the utf8 pointer.
This would also means that theses client, topic, ... strings can be
safely stored in ROM.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Now there's an audio reference section move the i2s docs there
as the audio section is a better fit.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Fix missing implementation of initialization of common
advertising header bit fields when new auxiliary channel PDU
is instantiated. This caused corrupt invalid Bluetooth
Device address being copied from uninitialised previous
auxiliary PDU instead of copying from primary channel PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update compile.sh and added test_script, so that
bsim_test_advx bsim_test application is built and run in
CI.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Review rework, added comments, TODOs, FIXMEs and converted
magic number use in advertising set state flags to defines.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added comments and code to make note that disabling all
advertising sets is not yet implemented.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor pdu.h defined in anticipation of reused in
Advertising Extensions implementation. To reuse in
calculating ticks_slots etc.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix segmentation fault detected by BabbleSim test due to
incorrect number of tickers being allocated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Avoid ticker from null pointer dereferencing when storing
operation callback functions to be called during collision
resolution.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix scan set allocation using BT_CTLR_SCAN_SET instead of
an incorrect duplicate BT_CTLR_SCAN_MAX.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
