hal_radio_tx_chain_delay_ns_get() was incorrectly
returning the microsecond value, resulting in a 1us
error in the timing => Fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Align the header a bit with the one for the real radio,
adding missing Tx power levels and removing TODO which did not
need doing.
The old one originated as a copy of the nrf52833 one, and did not
evolve like the real ones.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove a few macros which are not used anywhere in the tree.
For the sake of simplifying the header and easing its understanding.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The following changes have been done:
1.
HAL_SW_SWITCH_GROUP_TASK_DISABLE_PPI_REGISTER_TASK(index)
= HAL_SW_SWITCH_GROUP_TASK_DISABLE_PPI_TASK(channel)
has been convered into
HAL_SW_SWITCH_GROUP_TASK_DISABLE_PPI_REGISTER_TASK(index, channel)
2.
HAL_SW_SWITCH_GROUP_TASK_ENABLE_PPI_REGISTER_TASK(index)
= HAL_SW_SWITCH_GROUP_TASK_ENABLE_PPI_TASK
Which was only used in one place, has been replaced with the
equivalent HAL call
3.
HAL_SW_SWITCH_GROUP_TASK_ENABLE_PPI_REGISTER_TASK(index) = 0
was replaced with the HAL subscribe clear function
nrf_dppi_subscribe_clear(NRF_DPPIC,
HAL_SW_DPPI_TASK_EN_FROM_IDX(SW_SWITCH_TIMER_TASK_GROUP(index)));
4.
NRF_DPPIC->SUBSCRIBE_CHG[group].EN/DIS = 0;
have been replaced with the equivalent HAL clear call
5.
NRF_DPPIC->TASKS_CHG[group].DIS = 1;
have been replaced with the equivalent hal task_trigger() call
6.
Manually setting the CHG registers, has been replaced with a
clear + add (because the hal does not have a set function yet)
So,
NRF_DPPIC->CHG[group] = value
has been replaced with
nrf_dppi_group_clear(NRF_DPPIC, group);
nrf_dppi_channels_include_in_group(NRF_DPPIC, value, group);
(A set function has been requested from the HAL team)
Note: There is other direct registes writes to the dppi subscribe and CHG
registers in the coded phy parts which have not been changed yet.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This requirement was implicit as the only backend the host is currently
tested with behaves this way.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Fix regression in sw switch single timer id use for nRF53x
series SoC.
Regression introduced in commit cfcbe5d68e ("Bluetooth:
Controller: Remove redudant header file includes").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Be explicit about the HCI backend that Bluetooth unit tests require.
Some unit tests depend on `BT_HAS_HCI_VS`, so also enable that.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Rename the bsim header in preparation for having more
simulated targets.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
To avoid a build error when coded phy is not enabled
for a nrf53: These three functions are only used for coded phy,
and depend on macros which are only defined if coded phy
is enabled.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch use of kconfig:
* SOC_SERIES_NRF53X -> SOC_COPATIBLE_NRF53X
* SOC_NRF5340_CPUNET -> SOC_COMPATIBLE_NRF5340_CPUNET
to also select those options/code when building for
the nrf53 simulated targets.
Also switch three kconfig range dependencies from
SOC_SERIES_NRF52X to SOC_COPATIBLE_NRF52X
(IRQ priority related) for consistency. These sound
not really have an impact.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix assertion due to late Peripheral CIS active flag being
initialized. CIS active flag shall be initialized when it is
acquired.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
It is always possible to bind to same port if the sockets
are in different address family.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Turn the nested arrays of `scan_params->chan` into a single array.
This adds the requirement to specify the band for each channel, but
eliminates the large amount of dead memory for unused bands. Overall,
this saves 50% of the RAM space for this variable.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Make the maximum number of channels that can be manually scanned
configurable by the application. The previous value of 233 was vastly
overallocating memory as the largest band only contains 60 allocated
channels.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
A few attributes isn't cloned togerder with pkt.
This commit add missing part.
Additionally, because the `eof` flag in net_pkt structure is
avilable unconditionally hence `#if defined(CONFIG_NET_SOCKETS)`
guard has been removed form setter and getter functions for
this flag.
Signed-off-by: Marcin Gasiorek <marcin.gasiorek@nordicsemi.no>
In net_pkt structure couple of flags are no longer used.
Flag pkt_queued can be removed permanently togeter with setter
and getter functions.
Second flag sent_or_eof has been renamed because it is still
used partially only for indicating EOF. Additionally unused setter
and getter for 'sent_' part of this flag are removed.
Signed-off-by: Marcin Gasiorek <marcin.gasiorek@nordicsemi.no>
Maximize BIG event length to extend upto ISO interval, and
allow PTO and Control subevents to be pre-emptible.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Calculate Broadcast ISO event overheads due to extended and
periodic advertising events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updates possible return errors for fs mgmt file upload, to clarify
when a provided path is on a read-only filesystem or if the mount
point does not exist.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
In spec:
The LwM2M Client MUST reject any LwM2M Server operation on
the Security Object (ID: 0) with an "4.01 Unauthorized" response
code.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
With bootstrap one function is unused. Fix by changing
ifdef to if (IS_ENABLED()) so linker can drop it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
If autoinit is not enebled, it is allowed to build a few backends and
initialize a proper one in runtime.
Check number of backends only if autoinit is enabled.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
The header file contains mixture of functions and static arrays.
Replacing static arrays to functions.
Initialize functions in C file.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Fix missing Coded PHY implementation conditional compile
causing compile error when disabling Coded PHY support in
SoCs that have radio that support Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Revert EVENT_OVERHEAD_START_US value for Coded PHY support,
needed to pass LL/DDI/SCN/BV-21-C and LL/DDI/SCN/BV-25-C.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reduce number of successive calls to ticker_job() by
disabling mayflies in the ULL_HIGH priority, enqueue
ticker_yield_abs() and ticker_start() before re-enabling
so that single ticker_job() handles both yield and start.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix short prepare handling when more than one event is
enqueued in the pipeline and the short prepare is placed at
the end of the prepare pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticks_slot_window use in Observer, do not use for
unreserved continuous scanning, and do not use when scanning
on both 1M and Coded PHY simultaneously.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use ticker_ticks_diff_get consistently when calculating
difference between ticker ticks when determining short
prepare requests.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the state/role context parameter in prepare pipeline
to identify the preempt timeout that was setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
These change are reverted as part of fixing regression
failure in LL/DDI/SCN/BV-21-C and LL/DDI/SCN/BV-25-C.
This reverts commit 0d54ca8761.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for reading and writing long values (> MTU)
when using the CAP API.
This change does make it slightly slower to execute the
CAP procedures as it is now done on a one-by-one basis,
which affect multi-ACL setups, but that also means
that the buffer requirements for CAP will generally be lower.
There is still room for improvement as we can perform the BAP
operations in parallel on each ACl, which should return this to
its former performance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
