Add it515xx analog to digital converter driver which supports 8 channels
ch0 ~ ch7 and 12-bit resolution.
Signed-off-by: Yunshao Chiang <Yunshao.Chiang@ite.com.tw>
anonymous/no authentication mode had been removed
from the last hawkBit server release, so mention it and
deprecate the option.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
When GPIO17 or 16 is used as an external REF_CLK signal, the output is
enabled in eth_esp32.c This was added in PR number #65759 and then refined
in PR #74442. However this does not work for PHYs which need the REF_CLK
for MDIO communication, such as LAN8720A. In such cases phy_mii driver
tries to get the ID of such a PHY before REF_CLK is present. Therefore
in this PR I propose to move REF_CLK initialization from eth_esp32.c to
mdio_esp32.c which gets initialized before PHY and ETH.
Signed-off-by: Łukasz Iwaszkiewicz <lukasz.iwaszkiewicz@gmail.com>
Switches back to equal sized partitions, this fixes an issue
whereby the number of overhead sectors for a swap mode was
incorrectly listed as 2 when it should have been 1, and also
allows using any swap mode. This means that when using swap
using mode, 1 sector in the secondary partition will be unusable,
and when using swap using offset, 1 sector in the primary
partition will be unusable
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Enable `NET_ZPERF_SERVER` for samples that currently enable `NET_ZPERF`
to prevent feature regressions.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Make the zperf server support optional, if only upload throughput
testing is required. This reduces the resources required to operate.
Signed-off-by: Jordan Yates <jordan@embeint.com>
`NET_ZPERF` enables the core zperf utility library, not a shell module.
Add more specifics about what the utility can communicate with.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Part of the socket matching criteria for AF_PACKET family took place
inside conn_raw_socket() function, and some of it was redundant with
what already was checked in net_conn_packet_input(). Moreover, if the
packet cloning for packet socket failed for whatever reason, the packet
was reported as NET_DROP, which was confusing.
Finally, conn_raw_socket() updated network stats, which didn't really
work as net stats are only collected for UDP/TCP protocols and not for
L2 level protocols.
Therefore, cleanup the processing by:
* Moving all socket matching criteria into net_conn_packet_input()
for clarity,
* Drop unneeded net stats functions,
* Clarify NET_DROP strategy for packet socket input.
net_conn_packet_input() should only be responsible for delivering
packets to respective packet sockets, it should not decide whether
to drop the packet or not - it's L2/L3 processing code
responsibility. Therefore, assume this function forwards packet for
further processing by default, and only allow small optimization to
return NET_OK if the packet socket was really the only endpoint in
the system.
* And finally, since now conn_raw_socket() responsibility was to clone
the packet for the respective socket, and was almost identical to a
corresponding function for raw IP sockets, unify the two functions.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The current implementation of net_conn_input() can accept different
packet types, with completely different processing code, resulting in a
function which is pretty bloated, sliced with conditionally enabled code
and hard to understand and therefore maintain.
This commit splits that function into smaller ones, specialized for
different packet types (and entry levels). The following functions have
been extracted from the original one:
- net_conn_packet_input() for early packet processing (covering
AF_PACKET family sockets)
- net_conn_raw_ip_input() for raw IP packets processing (covering
AF_INET(6)/SOCK_RAW sockets)
- net_conn_can_input() for CAN packets processing (covering AF_CAN
family sockets)
The net_conn_input() function stripped from above cases now only takes
care of packets that have been processed by respective L4 and are
intended for regular TCP/UDP sockets.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
After L2 processing, the LL protocol type is already known and should be
set accordingly on the packet. Therefore it can be passed to the
net_packet_socket_input() function to allow proper socket filtering
based on protocol.
Additionally, as LL protocol type is 16 bit value, fix the proto
parameter type in net_packet_socket_input().
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Enhanced uart-controller.yaml to expand parity type support,
now including 'mark' and 'space' options.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
BR_SEND_KEYS_SC should be used to determine the value of
Responder Key Distribution when sending pairing_response to
reply smp br pairing_request.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
For the flash with the block size equal to or smaller than 64 bytes,
using a specific "32" bytes for adding for destination_offset and "32"
bytes for subtracting the size that need to copy is not correct.
As a solution, I will add one-fourth of a block size for the
destination_offset and modify the size that need to copy to
[block size + one-fourth of a block size].
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
move net_if_carrier_off() before
phy_link_callback_set() to ensure the carrier is
not truned off, when the link is already up.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
move net_if_carrier_off() before
phy_link_callback_set() to ensure the carrier is
not truned off, when the link is already up.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
move net_if_carrier_off() before
phy_link_callback_set() to ensure the carrier is
not truned off, when the link is already up.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
There is no smartdma on RT700, so to perform DCS memory write the CPU has
to write APB buffer word by word, which is too slow for most applications.
But the DCNano in DBI mode can be used to interface with the MIPI-DSI on
RT700, and send data to MIPI-DSI to transfer, once it is properly
configured, which solves the issue.
First added new parameter first_write in display_buffer_descriptor to let
NXP DCNano DBI driver know to use MIPI_DCS_WRITE_MEMORY_START or
MIPI_DCS_WRITE_MEMORY_CONTINUE.
Second updated the MCUX MIPI-DSI driver to support using the NXP DCNano DBI
driver for memory write.
Signed-off-by: Kate Wang <yumeng.wang@nxp.com>
Introduce NXP NCNano driver using MIPI DBI class. This peripheral
supports 8080 and 6800 mode. The driver also supports used with
nxp,mipi_dsi_2l driver, for the panel with DPHY bus, such as g1120b0mipi.
Signed-off-by: Kate Wang <yumeng.wang@nxp.com>
Add defines for color coding of DBI Type A(Motorola 6800)
and B(Intel 8080) bus. This is to comply with the MIPI
Alliance Standard for Display Bus Interface v2.0.
Signed-off-by: Kate Wang <yumeng.wang@nxp.com>
Update nxp,dcnano-lcdif to support IP change on RT700. There are extra
registers need to be configured for the lcdif on RT700. Add new binding
item "version" to tell which version of the IP the SoC has.
Signed-off-by: Kate Wang <yumeng.wang@nxp.com>
The same as flash-args for flash, we will add commands to debug,
debugserver, and attach to specify arguments in the document.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
update remaining steps should just update the remaining steps, rescheduling
should happen after updating steps and hence is moved to position mode task
which is also in coherence with velocity mode task
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
To split bus support into separate files. This patch does not introduce
any functionality, but rather precedes a patch introducing I2C bus
support.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Restore userspace testing that was removed with commit 'aa2b72d32a
(tests: logging: remove userspace testing, 2024-04-10)' and reported in
the issue #49213.
For the tests running with threads in user space (with ZTEST_USER),
the memory partitions are configured in the test-suite setup.
Signed-off-by: Christoph Winklhofer <cj.winklhofer@gmail.com>
