In the case that the peer responds with fewer dcid values than the
number of scid values in the connection request, we would assert or read
past the end of the buffer.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
It is possible that LE CoC channel is in disconnecting state (eg due
to peer sending too many packets) but application is not yet aware
of this (ie disconnected callback was not called) and thus may call
bt_l2cap_chan_recv_complete() to return credits. In this case it
leads to assert in l2cap_chan_send_credits.
It looks like PTS 8.2.1 is able to trigger this scenario when
executing L2CAP/ECFC/BI-02-C test.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
The zcbor_bulk_priv.h uses STRINGIFY for some of definitions
and, due to lack of inclusion of the toolchain.h, that was causing
compilation errors when NEWLIB would be selected.
Fixes#44811.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
define test run id and make it available to ztest. This will be used to
verify we are evaluating the same test we have just built and flashed
and that we are not looking at some old output.
Existing code in ztest will use this, and twister will define the run
id.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
PR44014 introduced new pause logic for procedures but PR44297
was merged without being update to use it.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This adds a hash/checksum mcumgr handler to the file management commands
which can be used to get a hask or checksum of a file, and includes
handler implementations for IEEE CRC32 and SHA256.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
This adds a command handler to the file management mcumgr system to get
the status of a file without needing to return file data (currently
reporting the file size).
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
Now refactored Connection Parameter Request procedure supports
parameter checking, and implements reject_ext_ind on invalid parameters
Updates to TODO description for remaining work
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
First available subcommand is for doing a send operation. Send operation
is supported by the LwM2M version 1.1.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
The event counter value for connection and periodic advertising
events is updated to next value during event preparation (in one
of prepare_cb functions in LLL).
IQ report is prepared after event preparation, so value of event
counter is ahead of the current event value by one, hence it has
to be subtracted.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
HCI_LE_Connectionless_IQ_Report and HCI_LE_Connection_IQ_Report
events has fields that store event counter values: Periodic_Event_-
Counter and Event_Counter, respectively.
Values assigned to this HCI events are taken directly from
lower link layer objects. In case of too slow processing of
HCI events values provided by LLL contexts could be changed before
HCI sends events to Host. That can happen e.g. in case of short
periodic advertising interval and slow UART baudrate.
In such situation event counter values will be corrupted.
To prevent that situation, event counter values connected with
IQ sample reports, has to be stored in node_rx_iq_report when
a report instance is filled in LLL.
This commit introduces required changes.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
In order for the code to be more understandable, invert the logic to
decide when to re-trigger the RX work queue and document the approach.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
There is no need to use a k_fifo object to queue the items that are
passed to bt_recv() now that we are using a work queue instead of a
thread, since there is no need for blocking on the actual queue, instead
relying on the fact that work is triggered to know that an item is ready
for processing.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The zephyr_grp log module name was incorrectly named
MGMT_SETTINGS and module registration has been using module name
mgmt_zephyr_basic, which is also incorrect.
Both have been changed to mcumgr_zephyr_grp.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds transport dedicated menu and gathers all transport
options under that menu; each transport gets its own menu, witch
gathers options specific for that transport
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adds new command that allows to retrieve MCUMGR parameters.
Currently the command returns MCUMGR buffer size and count.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Change CONFIG_BT_RECV_IS_RX_THREAD into a
choice:CONFIG_BT_RECV_CONTEXT with the following options
(names can be discussed further of course):
CONFIG_BT_RECV_BLOCKING
CONFIG_BT_RECV_WORKQ_BT
CONFIG_BT_RECV_WORKQ_SYS
This way users would be able to choose what to run most of
the BLE stack on, they wouldn't be forced to a single model.
We would default to CONFIG_BT_RECV_BLOCKING so that we wouldn't
need to change the system workqueue stack size by default, instead
asking users to do so if they select the CONFIG_BT_RECV_WORKQ_SYS option
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Introduce set/get SO_SNDBUF option using the setsockopt
function. In addition, for TCP, check the sndbuf value
before queuing data.
Signed-off-by: Mohan Kumar Kumar <mohankm@fb.com>
Use shell_print_ctx macro when printing to shall from callbacks.
ctx_shell may not be initialized when callback is called.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
'optval' in setsockopt(..., SO_BINDTODEVICE, ...) was casted explicitly
from 'const void *' to 'struct ifreq *'. Rely on C implicit casting from
'const void *' to 'const struct ifreq *' and simply update variable
type. This prevents unwanted modification of ifreq value in the future.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This option will be used as default socket priority by offloaded socket
drivers.
Describe how to prioritize native TLS over offloaded TLS (and vice
versa) using sockets priorities.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Make sure that the test rules' `before` function runs before the
suite's. This allows the suite to override any defaults set by the
rule.
Signed-off-by: Yuval Peress <peress@google.com>
Move include paths and add new target_include_directories to support
backwards compatibility:
* /include -> /include/zephyr
example: <irq.h> -> <zephyr/irq.h>
Issue #41543
Signed-off-by: Yuval Peress <peress@google.com>
The IMG_MGMT_UL_CHUNK_SIZE is no longer used to control size of
intermediate buffer used for application image chunk processing,
instead directly request trasport buffer is used.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The echo sentence is now directly copied from request transport
buffer to response buffer, without use of intermediate buffer.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Now the chunk of uploaded file is directly read from the transport
buffer, net_buf, and is no longer copied into intermediate buffer
so the real size of chunk is actually how much the sender could
fit into MCUMGR_BUF_SIZE, less the other fields.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds private, for internal mcumgr use only, utility
function for bulk processing of CBOR map entries.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
