When sending 2 or more confirmable message before first one is
writed to socket all messages use same coap pending structure.
Now coap_pending_init() set data pointer which lock allocation
by each call.
Using data pointer for detecting free is more stable than timeout.
Timeout is initialized only before first socket send. Queued packet
may be triggered later than other and may cause that same block is
allocated multiple time.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
The audio stream should be detached from the endpoint
when the endpoint goes into the releasing state, instead
of the idle state.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
ase_process had a check for the IDLE state, but the
check did not do anything, so was removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The releasing state does not trigger any stream ops,
but will be a no-op case to avoid the error log
message.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Terminate connection with a MIC failure if an unexpected control PDU
is received during the Encryption Start procedure.
Add a greedy option to pdu_is_expected() to make sure the procedure
processes all unexpected control PDU in all cases.
Add unit test inspired by Bluetooth Qualification test
LL/SEC/CEN/BV-14-C,
Central Receiving unexpected PDU during encryption start
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Add support for both LL_REJECT_IND and LL_REJECT_EXT_IND when waiting
for the the response to the LL_ENC_REQ and LL_START_ENC_REQ.
Add unit test to test both LL_REJECT_IND and LL_REJECT_EXT_IND as
responses to LL_ENC_REQ.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Chose correct rejection PDU based on features supported on remote peer
when rejecting due to missing LTK.
Update unit test setup with faking that a feature exchange procedure
has run.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Terminate connection with a MIC failure if an unexpected control PDU
is received during the Encryption Start procedure.
Add unit test inspired by Bluetooth Qualification test
LL/SEC/PER/BI-05-C,
Peripheral Receiving unexpected PDU during encryption start
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
This adds suport for validation of received PDUs before they are
pass further to LLCP state machines. If PDU size is invalid it is
rejected with LL_UNKNOWN_RSP.
This was affecting following qualification test cases:
LL/PAC/PER/BI-01-C
LL/PAC/CEN/BI-01-C
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Introduce TLS socket options, which allow to configure session caching
on a socket.
The cache can be enabled on a socket with TLS_SESSION_CACHE option.
Once cache is enabled on a socket, the session will be stored for re-use
after a sucessfull handshake. If a socket is attempting to connect to a
host for which session is stored, the session will be resumed and mbed
TLS will attempt to use a simplified handshake procedure.
The server-side management of sessions is fully controlled by mbed TLS
after session caching is enabled on a socket.
The other TLS_SESSION_CACHE_PURGE option allows to clear all of the
cache entries, releasing the memory allocated for sessions.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In 92d8329d5b a new DT property was introduced to set the WQ priority
of the instance. The fallback value when the property was not present
was arbitrarily set to <0 PRIO_PREEMPT>.
The problem is that this value is actually changing the behaviour for
the code that is not explicitly setting the DT property, breaking in
some cases the existing code.
Move the default value to <0 PRIO_COOP> to give the old code a
consistent behaviour before and after the 92d8329d5b commit.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
When receiving Transaction Start PDU, assure that number of segments
needed to send a Provisioning PDU with TotalLength size is equal to SegN
value provided in the Transaction Start PDU.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
These two options significantly increase the amount of stack space used
by the logging thread as these generate both additional logging and
generate deep stacks themselves. This fixes running the
tests/subsys/logging/log_core_additional/logging.add.log1 test on
riscv32 with THREAD_LOCAL_STORAGE enabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
The thread switching hooks are invoked in the middle of thread
switching, after the out-going thread registers are saved, but before
the in-coming thread registers are restored, and also before
z_thread_entry is called if the thread is just starting.
When the core is first starting, the TLS base register won't be set at
all, so accessing variables will fault. When switching threads, the
in-coming thread TLS base register will not have been restored, so the
z_tls_current value will end up getting the out-going thread instead.
To fix this, switch from k_current_get() to z_current_get().
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of waiting one connection interval, as a result of the state
change, perform the check for instant already on reception of
CONNECTION_UPDATE_IND
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Compile out misc. members not used when Connection Parameter Request
is not supported.
Implement missing tests re. unsupported features in CU/CPR procedure
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Instead of using a fixed fin timeout, compute it based on the number
of retries. Fixes issue found by PR 44545.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Bluetooth Mesh uses tinycrypt library for security related
algorithms. This PR encapsulates tinycrypt dependency within
one file to make the current implementation more portable.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The function setsockopt() option TLS_CIPHERSUITE_LIST
allows the user to set a specific list of ciphersuites
when using the Zephyr native + Mbed TLS stack. However, the
list provided was not actually being used later for
handshaking.
This adds the missing calls to mbedtls_ssl_conf_ciphersuites()
to use the list provided. If none was provided, fall back
to the default list as determined by Mbed TLS from Kconfig
values.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Update the new API to use K_USER as the flags for both
CONFIG_USERSPACE and CONFIG_TEST_USERSPACE. Also, fix the linker
script to properly include the suites, tests, and rules.
Fixes#44108
Signed-off-by: Yuval Peress <peress@google.com>
When a running procedure receives a REJECT or UNKNOWN_RSP PDU that is
not an expected part of the procedure flow this leads to termination
of the connection
This affects procedures:
CU/CPR, CTE, PHY, PING, DLE, FEX, VEX, CHMU
Unit tests are updated to cover the updated behaviour.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Add all information from the ISO established events
and provide the information in the get_info function.
The use cases of each field heavily depends on what
the ISO streams are used for.
Most, if not all, of the field can be used by the
higher layers to improve quality and/or reliability
of e.g. audio streams that use ISO.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There is potential buffer overflow in pb adv.
If Transaction Continuation PDU comes before
Transaction Start PDU the last segment number is set to 0xff.
The current implementation has a strictly limited buffer size.
It is possible to receive malformed frame with wrong segment
number. All segments with number 2 and above will be stored
in the memory behind Rx buffer.
Signed-off-by: Aleksandr Khromykh <Aleksandr.Khromykh@nordicsemi.no>
Rewrite the entire Procedure Response Timeout mechanism.
Use two separate timers for local and remote initiated procedures.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
As per bluetooth spec Vol. 6 part B section 5.3 we need to terminate
the connection under given situation
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
BT Core spec 5.3 Vol 6, Part B section 2.4.23 LL_PHY_UPDATE_IND says:
"If both the PHY_C_TO_P and PHY_P_TO_C fields are zero then there is no
Instant and the Instant field is reserved for future use."
Fields that are reserved for future shall be filled with zeros.
New LLCPs implementation didn't handle this case and set the instant
as if there were a PHY change. That caused qualification tests to fail.
The commit fixes the issue.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Previously, if a callback was set for notifications, they would always be
sent over unenhanced ATT.
The nfy_mult_data was bigger than the buffer user_data and we were this
overflowing the buffer when setting the tx callback user_data. Now the
data is stored separately and only a pointer to it is added to the
buffer user_data.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
This will generate profile data that can be analyzed using gprof. When
you build the application (currently for native_posix only), after
running the application you will get a file "gmon.out" with the call
graph which can be processed with gprof:
gprof build/zephyr/zephyr.exe gmon.out > analysis.txt
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Validate `id` so that `bt_dev.irk[id]` cannot result in an out-of-bounds
access.
This fixes coverity report 239569.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
The Tx interval is now calculated at the beginning
of the Tx test and the next transmission is
triggerd by the switch timer instead of event
timer. This fixes a corner case issue when
timer rollover.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
When Host calls HCI_LE_Connection_CTE_Request_Enable with cte type
set to AoD with 1us slots or AoD with 2 us slots, the Controller
verifies if peer device supports Antenna Switching During CTE
Transmission (AoD) feature.
That is wrong because the feature is marked as optional when send
to peer, so it shall be igonerd by remote device.
There are no means to check if peer device supports particular
CTE type, hence the check has to be removed.
The check causes enable CTE REQ procedure to fail after feature
exchange has happened.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The CTE request procedure can be run in periodic and non-periodic mode.
In periodic mode it stays enabled until Host call HCI_LE_Connection_CTE-
_Request_Enable(Enable=0x0).
In non-periodic mode the command is disabled after completion,
LL_CTE_RSP is successfully received.
There is missing disable of the procedure in the current code,
so Host is not able to run the command HCI_LE_Connection_CTE_Request_-
Enable(Enable=0x1) again without explicit call to HCI_LE_Connection_-
CTE_Request_Enable(Enable=0x0).
The commit adds missing code responsible for disable of the procedure.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
