PM should not be enabled by default at the soc level. This is an
application decision and not a platform decision whether to enable or
disable PM features.
Enabling PM by default will result in descripencies and test scope and
failures in tests that do not account for PM being enabled.
Fixes#60359
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert this sample application build to sysbuild,
and update documentation.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support for these two options in the simulated board.
Before these options were otherwise defined in the real
BOARD/SOC kconfig files, which meant samples/tests which
used them would not be able to build due to a kconfig error.
With this change they can both be selected, and the right
functionality is built in.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* Update the HW models module to
90f4484cbaec986ed253b4fe9649aa75e632de15
Including the following:
* 90f4484 nrf_dppi & dppi_hack: Add support for NRF_DPPI_ENDPOINT_
Note: This update requires hal_nordic/nrfx release 3.2
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
If in a server multiple users are running compliance then it throws
errors as the filename "Kconfig.modules" and "Kconfig.dts" is owned by
someone else.
Fix this by creating a randomized Kconfig file and delete after use.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Replaces sizeof(header) which is equal to the size of the pointer,
by sizeof (*header), which is equal to the size of struct message_header.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Passing an invalid errno value to strerror is undefined behavior in
POSIX. While all Zephyr-specific C libraries may be required to return a
specific value, we can't hold an external C library to that standard.
Signed-off-by: Keith Packard <keithp@keithp.com>
The native library may use a 32-bit time_t, so we need to avoid
having the compiler generate an error during compilation.
Signed-off-by: Keith Packard <keithp@keithp.com>
The loop in `coredump_flash_backend_buffer_output` might fail without
any alerts. This could be due to e.g. a too small coredump-partion.
Add a LOG_ERR if an error occurs.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
ZLP packet has to be read and acknowledged by host just like any other
DATA packet. Do not end transfer until the host actually acknowledged
the trailing ZLP. This fixes the race condition between host and Zephyr
application where the next transfer could be lost if host did not issue
IN token (that would read read ZLP) before the application tried to
start new transfer.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Merging 565c9376f1
exposed an issue in this test, which causes an assert in the
mps3_an547.
For more information check
https://github.com/zephyrproject-rtos/zephyr/issues/64387
The issue needs further analysis.
With this platform being an integration
platform for this test, it gets triggered in CI by unrelated
PRs, causing CI failures and blocking development.
As an interim measure, to unblock development in the main branch,
let's exclude this platform from this test.
This commit should be reverted once the underlaying issue is
indentified and addressed.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add choice for BL2 log level configuration.
Silence TF-M BL2 logging when TF-M is configured to be silent.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The labels used in chosen node are not defined in dtsi file.
They are defined on board level and also chosen is already set there to
proper values.
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
The header file defines macros that are not used in the boards dts but on
the SoC level. They should be include where they are used.
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
This commit adds the `dts/riscv` directory to the `RISCV arch` area of
maintenance. Right now, RISC-V devicetrees are covered only by
platform-specific areas (Espressif, ITE). When other RISC-V platform
devicetrees are affected in a PR, it is left unassigned.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Commit 345735d0a8 removed all uses of the
now obsolete CONFIG_ZTEST_NEW_API Kconfig option. A couple of stray ones
are still remaining in the tree, remove them.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Change the CAN controller driver implementations for the
can_remove_rx_filter() API call to be consistent in their validation of the
supplied filter_id.
Fixes: #64398
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Make sure DEBUG is enabled if this test is run in CI.
Also re-instantiate CONFIG_PM=y which was abusively removed in a previous
change.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Force STM32_ENABLE_DEBUG_SLEEP_STOP option when running tests.
This option enables Debug in Sleep/stop states and disables it when
disabled (default state).
When disabled, it may be impossible to flash the device with runner
such as openocd. It's generally working using cubeprogrammer, but it might
fail as well with fault configuration.
Instead of fixing each test or breaking CI each time a new test is created
with CONFIG_PM=y, force this option to be enabled when ZTEST=y (as it was
already the case when DEBUG=y).
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Adds support for using the fixed and GPIO regulator drivers when
multithreading is disabled, such as in MCUboot.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add case 'test_resend_request' to test that coap_client resends
the message if no response received.
Add response code check to case 'test_no_response'.
Initialize messages_needing_response[] in test setup.
Lower CONFIG_COAP_INIT_ACK_TIMEOUT_MS and decrease delays.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
If CONFIG_BT_ISO_TEST_PARAMS=y then the CIG and BIG
create params was not properly initialized.
Modified the TX for BIS and CIS to be more similar
Added a timeout on the buffer to avoid any potentional
deadlocks.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Moving the Zephyr specific config options from
modules/hostap/Kconfig to corresponding Kconfig where the
option is specified.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Only adds basic build support using Zephyr. Crypto support is disabled
till the MbedTLS integration is complete.
Signed-off-by: Sridhar Nuvusetty <sridhar.nuvusetty@nordicsemi.no>
Signed-off-by: Sachin Kulkarni <sachin.kulkarni@nordicsemi.no>
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
for nucleo_stm32g0b1 board.
the HSI48 clock is the clock used by default for the USB controller,
however its default tolerance is not enough for the USB specification,
leading to some random errors depending on many factors, including the
upstream HUB or host.
this commit adds an option in the device tree to enable the STM32 Clock
recovery system (CRS) using USB SOF packet reception as a reference,
which brings the HSI48 within the required accuracy for USB transfers.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
Add a few tests that expect at most one interrupt being triggered when
configuring a GPIO output in two scenarios:
1. From just after booting
2. After another configuration of the same values
Due 1., this patch adds the tests to run before any other tests in the
gpio_basic_api test suite.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
To avoid glitches when configuring GPIO output, make logic closer to
that of V2 after 79ee5a876f.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
