In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Assign BT_CTLR_ADV_DATA_LEN_MAX value to 255 to match the
corresponding BT_CTLR_SCAN_DATA_LEN_MAX value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Strictly restrict AD Data length to BT_CTLR_ADV_DATA_LEN_MAX
when there can be free bytes in Advertising PDU with common
extended header format of less that the maximum 64 bytes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Change bt_audio_broadcast_sink_sync to use an array of pointers
to bt_audio_streams, instead of an array of streams. This makes
the API more flexible, as well consistent with the broadcast
source and unicast APIs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The bt_audio_broadcast_source_create function will now
take an array of stream pointers, instead of an array
of streams. This is to make the API more flexible as
well as more consistent with the unicast API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In bt_audio_unicast_group_create, bt_audio_unicast_group_add_streams
and bt_audio_unicast_group_remove_streams to use an array
of pointers, instead of an array of streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use the UPLLCK clock for the CAN controller as recommended by the Atmel SAM
E70 data sheet.
Move the configuration of the clock prescaler from Kconfig to devicetree
and limit it to the values recommended by the SAM E70 datasheet.
Fixes: #45012
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Enable the UTMI PLL (UPLL) clock and add a static definition of its clock
frequency.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Co-authored-by: Gerson Fernando Budke <nandojve@gmail.com>
Enable the UTMI PLL (UPLL) clock and add a static definition of its clock
frequency.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Co-authored-by: Gerson Fernando Budke <nandojve@gmail.com>
This extends implementation with sending Preset Changed
notification/indication when preset changes its availability or is
added or deleted.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
In #45014 the m_can compatible identifier was changed from "m-can-base"
to "m_can-base" while #45216 was being developed. This commit updates
the dts for u5 to the latest format.
Signed-off-by: Peter Maxwell Warasila <madmaxwell@soundcomesout.com>
Since the pinctrl header file can be included by user-created drivers,
an application developer including this file and only applying
-Wextra to the application source files will see many warnings.
-Wold-style-declaration warning is also emitted if 'static' is not
at the beginning of a declaration.
Signed-off-by: Pete Dietl <petedietl@gmail.com>
This is a follow-up to commit fd7633126e.
For some reason the above commit added several switch cases without
required break statements. In effect, the same pin could get assigned
to multiple signal lines in QDEC or QSPI peripherals if not all pins
were defined for them in devicetree, and consequently these peripherals
could not work properly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In order to bring consistency in-tree, migrate all kernel code to the
new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Doxygen only serves the latest couple of releases from their website.
However, all releases (including the old ones) can be downloaded from
Sourceforge.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There shouldn't be any reason to be able to modify the passed in SSID,
and having this non-const gives application warnings if passing a
constant string.
Signed-off-by: Ole Morten Haaland <omh@icsys.no>
Promptless choices can show up as parents when, e.g., people define
choices in multiple locations, including modules. Render them using the
built-in Kconfig expression to string formatter, so that they show up as
'<choice (...)>'.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Allow CTS line to determine UART shutdown for any sleep mode.
This allows lower average current consumption for LITE
HIBERNATE mode.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
In order to bring consistency in-tree, migrate all includes within
include directory to the new prefix <zephyr/...>. Note that the
conversion has been scripted, refer to zephyrproject-rtos#45388 for more
details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The ztest unittest module relies on some headers that fake the real
ones, e.g. <zephyr/arch/cpu.h>. When new header location was introduced,
their path was not updates. This patch fixes this problem and provides
ztest with both, legacy and new include paths so that it can keep
working on both scenarios.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all lib code to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
soc_config.c for snps_nsim had no actual code, just a bunch of includes.
Deleting as it has no value (and triggered a compliance warning because
file had no newline at EOF).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all soc code to the
new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all modules code to the
new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all arch code to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all boards code to the
new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all dts code to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The fifo depth parameter was missing as it was not visible in original
sof driver interface (which the dai interface is based on). So add it to
properties as it might be used by apps using future alh and dmic drivers.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
When doing global changes, like typo fixes or header changes, keep
default scope and do not build each test for each platform.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added chosen syntax in Device Tree to abstract the IPC device that is
used with the IPC service module in the Bluetooth HCI RPMsg driver.
Ported affected boards to declare this alias.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Cleaned up the IPC configuration for nRF5340 SoC in Device Tree. This
change fixes the (simple_bus_reg) warning about the missing or empty
reg/ranges property.
This is a follow-up to commit cf6a58d.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
<zephyr/zephyr/types.h> is no longer available, <zephyr/types.h> should
be used instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There were no unit tests that verify if instant value send in
LL_PHY_UPDATE_IND PDU are correct. The commit adds missing tests.
Besides that there is a small update to all ull_cp_phy_update calls,
to improve readability of the code. Magic number was changed to
HOST_INITIATED macro.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
In a function pu_prepare_instant there is a condition that
checks if there is actual change of a PHY. That condition
was based on ctx->data.pu.tx and ctx->data.pu.rx.
These members store PHY that is or will be used, hence
the condition is wrong. Even there is no actual change in
the PHY, values could be not equal to zero. In such case
the instant value would be set to wrong value.
What more the condition be an 'or' not an 'and' because
one of the values must be different than zero to have the
PHY change and instant different than zero.
After update of the condition, the function call places
must be changed. The ctx->data.pu.c_to_p_phy and
ctx->data.pu.p_to_c_phy are set in pu_prepare_update_ind
function, hence pu_prepare_instant should be called after
that.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Update the Zephyr include paths to be compatible with removing
`CONFIG_LEGACY_INCLUDE_PATH` in the future.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Respect the configured values for how long the domain takes to turn on,
and how long the domain needs to be off for before it can be repowered.
As these actions can block, guard the transition function with
pm_device_action_can_block. To avoid system PM being able to turn the
domain off but not back on again, guard the entire implementation.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Document the limitations of system power management when it comes to
transitions that are run from the idle thread.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Validate the behaviour of `k_can_yield` in pre-kernel, ISR, and idle
thread and standard thread contexts.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Implements a function that application and driver code can use to check
whether it is valid to yield (or block) in the current context. This
check is required for functions that can feasibly be run from multiple
contexts. The primary intended use case is power management transition
functions, which can be run by application code explicitly or
automatically in the idle thread by system PM.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
