PR44014 introduced new pause logic for procedures but PR44297
was merged without being update to use it.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This adds documentation which explains fs mcumgr commands for the status
and hash/checksum commands.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
This adds a hash/checksum mcumgr handler to the file management commands
which can be used to get a hask or checksum of a file, and includes
handler implementations for IEEE CRC32 and SHA256.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
This adds a command handler to the file management mcumgr system to get
the status of a file without needing to return file data (currently
reporting the file size).
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
Now refactored Connection Parameter Request procedure supports
parameter checking, and implements reject_ext_ind on invalid parameters
Updates to TODO description for remaining work
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
First available subcommand is for doing a send operation. Send operation
is supported by the LwM2M version 1.1.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
We put disabling SOC interrupt enable register (IER) sequence in
between disable and enable core's global interrupt to prevent race
condition.
After core interrupt enable instruction has been executed, the new
configuration of IER has not yet been fully processed due to
asynchronization between core and SOC's source clock.
If SOC interrupt is fired under the above condition, we will get
IRQ number 0 in ISR due to IER disabling taken effect.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
The event counter value for connection and periodic advertising
events is updated to next value during event preparation (in one
of prepare_cb functions in LLL).
IQ report is prepared after event preparation, so value of event
counter is ahead of the current event value by one, hence it has
to be subtracted.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
HCI_LE_Connectionless_IQ_Report and HCI_LE_Connection_IQ_Report
events has fields that store event counter values: Periodic_Event_-
Counter and Event_Counter, respectively.
Values assigned to this HCI events are taken directly from
lower link layer objects. In case of too slow processing of
HCI events values provided by LLL contexts could be changed before
HCI sends events to Host. That can happen e.g. in case of short
periodic advertising interval and slow UART baudrate.
In such situation event counter values will be corrupted.
To prevent that situation, event counter values connected with
IQ sample reports, has to be stored in node_rx_iq_report when
a report instance is filled in LLL.
This commit introduces required changes.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
When we use a third-party or custom bootloader, there is also
need to remove the boot header. Change the select to imply,
so that the boot header can be removed by configuration when
MCUBoot is not used.
Signed-off-by: Frank Li <lgl88911@163.com>
In order for the code to be more understandable, invert the logic to
decide when to re-trigger the RX work queue and document the approach.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
There is no need to use a k_fifo object to queue the items that are
passed to bt_recv() now that we are using a work queue instead of a
thread, since there is no need for blocking on the actual queue, instead
relying on the fact that work is triggered to know that an item is ready
for processing.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This way, when RTC is used as the generator, one PPI channel per each
configured PWM channel can be saved.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use compare channel 0 in the generator for handling the PWM period.
This way all other channels offered by the generator can be easily
used for handling pulses on particular PWM channels.
So far the driver allowed to configure more than 3 channels for certain
TIMER instances, but since channel 3 was always used for the period,
the generation could not work in such setups.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The driver improperly uses the PWM channel index to reference
the GPIOTE channel to be used for the PWM signal generation.
Consequently, the PWM signal on a given channel can be correctly
generated only if both those indexes are by chance the same.
Fix this by switching to use the stored index of the actually
allocated GPIOTE channel.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit updates the backport workflow to use the backport action
v1.1.1-3, which introduces the following enhancements:
1. Cherry-pick backport commits with the `-x` option to improve
traceability.
2. Disable incorrect warning when "rebase merge" method is enabled.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
update hal_microchip revision, which includes mpfs_hal
for Microchip's PolarFire-SoC Icicle Kit.
Signed-off-by: Conor Paxton <conor.paxton@microchip.com>
So far, the majority of support has been through Linaro for these
platforms, but we do expect to bring a maintainer on from TI in the
near future.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Align definitions with definitions used in SOF upstream and define
CONFIG_XTENSA_WAITI_BUG for cAVS1.8, cAVS2.0 and cAVS2.5 platforms. On
these platforms, a workaround is needed with waiti.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
The zephyr_grp log module name was incorrectly named
MGMT_SETTINGS and module registration has been using module name
mgmt_zephyr_basic, which is also incorrect.
Both have been changed to mcumgr_zephyr_grp.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds transport dedicated menu and gathers all transport
options under that menu; each transport gets its own menu, witch
gathers options specific for that transport
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adds new command that allows to retrieve MCUMGR parameters.
Currently the command returns MCUMGR buffer size and count.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Change CONFIG_BT_RECV_IS_RX_THREAD into a
choice:CONFIG_BT_RECV_CONTEXT with the following options
(names can be discussed further of course):
CONFIG_BT_RECV_BLOCKING
CONFIG_BT_RECV_WORKQ_BT
CONFIG_BT_RECV_WORKQ_SYS
This way users would be able to choose what to run most of
the BLE stack on, they wouldn't be forced to a single model.
We would default to CONFIG_BT_RECV_BLOCKING so that we wouldn't
need to change the system workqueue stack size by default, instead
asking users to do so if they select the CONFIG_BT_RECV_WORKQ_SYS option
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Introduce set/get SO_SNDBUF option using the setsockopt
function. In addition, for TCP, check the sndbuf value
before queuing data.
Signed-off-by: Mohan Kumar Kumar <mohankm@fb.com>
This commit changes the CODE_DATA_RELOCATON dependency by
adding CPU_AARCH32_CORTEX_R next to CPU_CORTEX_M.
Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Cortex-M code is the only flavor that supports switching between secure
and non-secure state so make sure this kconfig only applies to it.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Commit a2cfb8431d ("arch: arm: Add code for swapping threads between
secure and non-secure") changed the mode variable in the _thread_arch to
be defined by ARM_STORE_EXC_RETURN or USERSPACE. The generated offset
define for mode was enabled by FPU_SHARING or USERSPACE. This broke
Cortex-R with FPU, but with ARM_STORE_EXC_RETURN disabled. Reconcile
the checks.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
