timeutil internally uses 1900 as base year for calculation,
that is hidden from caller context. Thus declared a macro in
the public header file, and uses that macro will let caller adjust the
calulations accordingly.
Signed-off-by: Anuj Pathak <anuj@croxel.com>
find the headset which a2dp related record len is SEQ32,
fix sdp_client_get_total too because it doesn't handle
SEQ32 too.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
As the .bin & .hex build output is optional
and it can be disabled by CONFIG_BUILD_OUTPUT_BIN/HEX,
add support for the mandatory .elf build output
to the linkserver runner flash command.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Following addition of a `name` to hal_stm32 module, the command to fetch
blobs that are required to build BLE applications on STM32WBA socs is now
changed from `west blob fetch stm32` to `west blob fetch hal_stm32`.
Update documentation and warn users in migration guide.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Added volume offset for CAP commander
Added gain settings for CAP commander
Added play, pause and seeking for MCS
Added program_info and metadata update for PBP
Added long read and notify for all TBS characteristics
Added TMAP CG
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For mapping operations in sys_mm_drv_simple_map_region() and
sys_mm_drv_simple_map_array(), when there was an error with
mapping any pages, it would simple return an error, leaving
already mapped pages still mapped. This modifies the behavior
where any failure during the whole mapping operation will
unmap the already mapped pages.
This also modifies the remapping and moving functions to
reset mappings when error is encountered.
Fixes#73121
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If a diff only has added or removed lines we need to match both '-' and '+'
characters in the hunk context.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Adds the use of generic touch reporting method for stmpe811 driver.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Adds the use of generic touch reporting method for ft5336 driver.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Adds a way of reporting touchscreen events
taking common properties into account.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Adds common properties for touchscreen controllers.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This transforms the existing driver for the Microchip MCP9808
to be used as a generic driver to be used with all
JEDEC JC 42.4 compliant temperature sensor chips.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Caught by CI in another PR, should be 'Unsupported' instead.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Added entries in the release note & migration guide about the
changes to the `kernel thread` shell command.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Added commands to access the APIs in the kernel/cpu_mask.c
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Use `shell_strtoull()` to parse the thread ID argument for
error checking.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
`stacks` `threads` & `unwind` are commands related to kernel
thread, group them one level inside a main `thread` command,
and rename `threads` to `list`:
- `kernel threads` -> `kernel thread list`
- `kernel stacks` -> `kernel thread stacks`
- `kernel unwind` -> `kernel thread unwind`
Additionally, rename and mark the `thread_valid()` function
as `__maybe_unused` as it might be unused for architectures
without stackwalk implementation, and use the locked version
of the thread iterator (`k_thread_foreach()`)
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The "channels-num" should not be used here, other system's parts are using
"channel-count" instead for the same purpose.
Also property's description has been сorrected.
Signed-off-by: Andrey VOLKOV <andrey.volkov@munic.io>
These boards support Bluetooth, so it should be listed under "supported".
There's also no (known) good reason to explicitly skip "net" tags, so
remove that from the ignore_tags list as well. We don't particularly know
or care about relevant net tests for these boards, so "net" is left out for
now from the "supported" list.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
These boards don't currently have the necessary binary blobs available
for Bluetooth, so keep their Bluetooth HCI DT node disabled.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Add overrun count in statistics. It will represent
the number of packets dropped either at received and
sent due to lack of buffer memory.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Remove water mark configuration and handle its interrupt
instead, since it is only present in ESP32S3.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
since h750 and h743 have the same irq wkup priority,
we can add wkup interrupt in h743.dsti and simply
include the file in h750.dtsi.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Increase wifi connect input parameters max count to 13. Previous count
7 is not enough if other security type is supported.
When enabling softAP, the parameter cnx_params in cmd_wifi_ap_enable()
is with static key word. Then the parameter will always save
configurations of last time. Remove static keyword to eliminate effects
of configs from last tim and do memset before setting up softAP.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Link mode shows unknown when legacy (A or bg only) device connects to
APUT. Set the link mode to WIFI_2 when the host freq over 4000 and set
link mode to WIFI_3 when the host freq over 2000.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Increase max count of CONFIG_WIFI_SHELL_MAX_AP_STA from 5 to 8. The
SoftAP of NXP wifi chip can support up to 8 stations.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Added new flag CONFIG_WIFI_NM_HOSTAPD_AP for hostapd support. Once this
flag is enabled, softAP will be setup by hostapd. Both wpa_supplicant
and hostapd uses same task and eloop.
Included necessary hostapd files when compiling wifi samples if
CONFIG_WIFI_NM_HOSTAPD_AP is enabled. Added hostapd support for all
softAP command of L2 wifi shell commands.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
When omitting the clk_src definition in a child node of a pclkblock,
it uses the source of the parent node.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Allows MSTP register addresses to be changed in the device tree
to support different configuration SoCs.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Add support for HSE as the RTC clock source.
The initial implementation has the following limitations:
- Only whole MHz HSE frequency is supported, e.g. 24.5 MHz will generate a
compile error.
- Frequencies equal or above 64 MHz are not supported and will generate a
compile error.
The implementation has been tested on nucleo_h563zi with:
- 8 MHz (via hse-bypass)
- 25 MHz (via external crystal)
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
pwm: pwm_api: update testcase.yaml and add new overlay configuration
to support flexio pwm driver.
spi: spi_loopback: update testcase.yaml and add new overlay
configuration to support flexio spi driver.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
After testing the flexio spi_loopback on the ke1xz platform,
it is found that the master transfer and receive are not
synchronized. So add loop code to wait for the master transfer
to complete for frdm_ke17z and frdm_ke17z512 platforms.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
