Cortex-M code is the only flavor that supports switching between secure
and non-secure state so make sure this kconfig only applies to it.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Commit a2cfb8431d ("arch: arm: Add code for swapping threads between
secure and non-secure") changed the mode variable in the _thread_arch to
be defined by ARM_STORE_EXC_RETURN or USERSPACE. The generated offset
define for mode was enabled by FPU_SHARING or USERSPACE. This broke
Cortex-R with FPU, but with ARM_STORE_EXC_RETURN disabled. Reconcile
the checks.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Use shell_print_ctx macro when printing to shall from callbacks.
ctx_shell may not be initialized when callback is called.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Introduces H7 FMC bindings with support for
memory remap or swap configuration.
The following values are supported:
* disabled - default mapping (reset state).
* sdram-sram - swaps the NOR/PSRAM and SDRAM banks.
* sdramb2 - remaps SDRAM bank 2.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
DBGMCU register, which is used for SWO pin configuration,
may not have TRACE_MODE bits in some STM32 MCUs.
Replace register access with LL functions selected based on SoC family.
Fixes#44584
Signed-off-by: Alexander Vasiliev <alex.m.vasil@gmail.com>
Previously, MCUBOOT_DATA_SHARING was enabled when BL2 was built
and when the firmware update partition was present. This is not
the only situation that you might be interested in this data
sharing. The data sharing now has it's own Kconfig.
Further, use of the firmware update partition requires data
sharing, so it selects it.
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
Prior instructions were incomplete, included extra, unneeded ways to
build the app.
This should simplify the instructions.
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
Previously, you were required to set the image versions through the
CMake variables TFM_IMAGE_VERSION_{S,NS}. For better integration with
the rest of the zephyr build system, these are now KConfig variables
with the same name.
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
This displays the secure firmware version before the nonsecure firmware
version at the beginning of boot.
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
Previously, the example was a scheleton. This patch
pushes firmware images with psa_fwu_write, and completes
the firmware update example.
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
This commit adds a sample application demonstrating how to use
the PSA Firmware Update API from TF-M. It also enables the
`FIRMWARE_UPDATE` partition to be included at build time.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
'optval' in setsockopt(..., SO_BINDTODEVICE, ...) was casted explicitly
from 'const void *' to 'struct ifreq *'. Rely on C implicit casting from
'const void *' to 'const struct ifreq *' and simply update variable
type. This prevents unwanted modification of ifreq value in the future.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Check if requested socket family, type and protocol are all supported by
the driver, instead of blindly acknowledging every possible variant.
Reuse switch statements checking valid parameter values that were
already part of simplelink_socket() function, by creating 3 helper
functions for conversion of each parameter (family, type and protocol)
from Zephyr to Simplelink values.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Check if requested socket family, type and protocol are all supported by
the driver, instead of blindly acknowledging every possible variant.
There is explicit support for UDP, TCP and TLS on top of IPv4.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Check if requested socket family, type and protocol are all supported by
the driver, instead of blindly acknowledging every possible variant.
There is explicit support for TCP on top of IPv4 and IPv6.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Check if requested socket family, type and protocol are all supported by
the driver, instead of blindly acknowledging every possible variant.
There is explicit support for UDP and TCP on top of IPv4 and IPv6.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Check if requested socket family, type and protocol are all supported by
the driver, instead of blindly acknowledging every possible variant.
There is explicit support for UDP, TCP and TLS on top of IPv4 and IPv6.
TLS seems to be supported only in 1.2 version, so allow just that
version.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use NET_SOCKETS_OFFLOAD_PRIORITY instead of
NET_SOCKETS_OFFLOAD_PRIORITY, so that by default offloaded sockets will
be used instead of native sockets.
Addiitonally this allows to select relative priority of offloaded TLS
versus native TLS when used together with NET_SOCKETS_TLS_PRIORITY.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use NET_SOCKETS_OFFLOAD_PRIORITY instead of
NET_SOCKETS_OFFLOAD_PRIORITY, so that by default offloaded sockets will
be used instead of native sockets.
Addiitonally this allows to select relative priority of offloaded TLS
versus native TLS when used together with NET_SOCKETS_TLS_PRIORITY.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use NET_SOCKETS_OFFLOAD_PRIORITY instead of
NET_SOCKETS_OFFLOAD_PRIORITY, so that by default offloaded sockets will
be used instead of native sockets.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use configurable NET_SOCKETS_OFFLOAD_PRIORITY instead of hardcoded value
in the driver itself. This allows to select relative priority of
offloaded TLS versus native TLS when used together with
NET_SOCKETS_TLS_PRIORITY.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use configurable NET_SOCKETS_OFFLOAD_PRIORITY instead of hardcoded value
in the driver itself. This allows to select relative priority of
offloaded TLS versus native TLS when used together with
NET_SOCKETS_TLS_PRIORITY.
Drop the build assert, as always prioritizing offloaded TLS over native
TLS should be application developer choice.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This option will be used as default socket priority by offloaded socket
drivers.
Describe how to prioritize native TLS over offloaded TLS (and vice
versa) using sockets priorities.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Make sure that the test rules' `before` function runs before the
suite's. This allows the suite to override any defaults set by the
rule.
Signed-off-by: Yuval Peress <peress@google.com>
Added required config for the display operation and default display name
to "LTDC" for LVGL subsystem when the peripheral LTDC is used.
Signed-off-by: Konstantinos Papadopoulos <kostas.papadopulos@gmail.com>
LTDC clock on F4/F7 series, is generated from PLLSAI which yet is not
implemented into Zephyr.
Signed-off-by: Konstantinos Papadopoulos <kostas.papadopulos@gmail.com>
Onboard display is actually an ILI9341. It is connected to SPI5 which
is shared with L3GD20. Max clock is set as described in BSP driver files
(stm32f429i_discovery.c@638). ILI9341 configuration updated to enable
RGB interface use.
Signed-off-by: Konstantinos Papadopoulos <kostas.papadopulos@gmail.com>
the icm42670 from Invensense/TDK is a 6-axis accelerometer with
gyroscope and temperature sensing capabilities.
this initial driver does not support the devices 2K FIFO or many of the
other advanced features. Instead, only basic features are implemented.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@escolifesciences.com>
Under QEMU and SeaBIOS, everything gets to be printed
immediately after "Booting from ROM.." as there is no newline.
This prevents parsing QEMU console output for the very first
line where it needs to match from the beginning of the line.
So add a dummy newline here so the next output is at
the beginning of a line.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Propagate the board revision to Kconfig via the environment.
This is useful for application code to have access to for similar
reasons that CONFIG_BOARD is useful.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Moving this option to the subdirectory for boards might make it easier
to find, and will keep it next to some other board-related Kconfig
options set in the same file.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add a Kconfig to disable non prefixed includes. By setting
`CONFIG_LEGACY_INCLUDE_PATH=n` developers can disable having
`include/zephyr` in the search path. This means that includes such
as `#include <kernel.h>` will no longer work.
Internally, every header should be updated to add the `zephyr/`
prefix to the headers. Only then, will developers be able to use
this config value for their applications.
Signed-off-by: Yuval Peress <peress@google.com>
Move include paths and add new target_include_directories to support
backwards compatibility:
* /include -> /include/zephyr
example: <irq.h> -> <zephyr/irq.h>
Issue #41543
Signed-off-by: Yuval Peress <peress@google.com>
Due to a wide range of variuation in the LSI RC oscillator
characteristics given by the datasheet of the soc,
It is necessary to add a delay for hardware watchdog.
This is done by the CONFIG_TASK_WDT_HW_FALLBACK_DELAY
Signed-off-by: Francois Ramu <francois.ramu@st.com>
