Remove the depency on host emulation of ECC for the Use debug keys
option.
This allows the application to use debug keys without shifting the
ECC from the controller to the host, which could potentially alter
the behavior of the application and make debugging this way less useful.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add definitions for the HCI command LE Generate DHKey v2.
This command includes the option to use the debug private key.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the ECC emulation setting the supported command bits in order
to group the supported commands together with the implementation of
these commands.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In order to avoid stalling LLCP procedures blocking done event
processing, done events are now put in a separate memory queue,
and processed by own mayfly function.
This ensures prepare/done refcount balancing and prevents assertion
due to lack of done events.
Signed-off-by: Morten Priess <mtpr@oticon.com>
We need to make sure aux is cleared on reset, otherwise we may end up
with legacy advertising with aux.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Set #0 is used for legacy advertising when legacy HCI commands are used
and in such case it's possible to enable advertising without any prior
configuration. This means we should better always have PDUs in set #0
initialized with default empty data.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We should remove all advertising sets when resetting controller. It's
enough to just clear is_created flag for each set.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
The definition to check if timers have up to 6 channels was causing
warnings when -Wexpansion-to-defined was enabled.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The first uart instance was already devicetree based. To be consistent
convert the second instance to also be devicetree based.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Removes the 3 byte padding at the end of each proxy connection's rx
buffer.
Fixes#18509.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
QDEC_NRFX shall depend on either HAS_HW_NRF_QDEC,
or HAS_HW_NRF_QDEC0, since in the nRF5340 Application
core definition we select HAS_HW_NRF_QDEC0 instead of
HAS_HW_NRF_QDEC.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add device tree nodes for QDEC peripheral instances
for nRF5340 Application core.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add Kconfig options to signify that the nRF5340
HW has support for QDEC instances. Select the
options in the nRF5340 Application core definition.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This driver missed #32228 PR that converted STM32 drivers
to use DEVICE_DT_GET for clock activation.
Due to the renaming of STM32_CLOCK_CONTROL_NAME to
STM32_CLOCK_CONTROL_NODE, driver could not compile anymore
Fix this.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The choice allowed for using TFM's own default. We now need full
knowledge over whether BL2 is enabled or not (e.g. to do signing),
so remove this option and simplify to a bool.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
The wrapper function detects when a logic-level initial value requires
inverting the physical level initial value, and updates the flags to
effect the necessary change. However where logical and physical
levels are not inverted the flag requesting logic-level initialization
was left in place and passed to a driver that got confused by it.
Clear the flag after its purpose has been addressed.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
If user sets CONFIG_NUM_PREEMPT_PRIORITIES=0, then the priority
of the net_mgmt thread will be -1 which is the same as idle thread.
This will trigger assert in kernel as then the minimum coop priority
is -2 in this case. Remove the net_mgmt thread priority setting from
Kconfig file as it is low value and set the coop thread priority
the same way as other network threads are doing it.
Fixes#32375
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add an object to retain data across both reboots and entry to
SYSTEM_OFF. This only works on nRF52, since nRF51 and nRF53 require
different low-level operations to configure RAM retention.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add a sample application to test MAX6675 cold-junction-compensated
K-thermocouple to digital converter.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The return value of clock_control_get_status is a clock_control_status
enum, but in case the device is not ready, an int is returned.
This leads to compiler errors. Introduced a new enum value
CLOCK_CONTROL_STATUS_UNAVAILABLE and return it instead of -ENODEV.
Signed-off-by: Alexander Wachter <alexander.wachter@leica-geosystems.com>
'IPC' and 'REGRESSION' are passed to the <option>
argument of cmake_parse_arguments, hence they are always defined,
and 'if (DEFINED)' would always return TRUE.
Use 'if' directly instead of 'if DEFINED' to check if these
options are set or not.
Ref: NCSDK-7702
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Write through switched_from in arch_switch() as required by the
switch protocol.
Also restructure the implementation to better match the template in
kernel_arch_interface.h, by removing a wrapper routine and instead
use CONTAINER_OF().
Fixes#32197
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
zassert_within should also compare on equality instead
of only greater/lower.
example:
zassert_within(1,1,0); // should return true
zassert_within(1,2,1); // should return true
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Add the missing pieces to enable XIP for AArch64. Try to simulate the
XIP using QEMU using the '-bios' parameter.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
'-Wexpansion-to-defined'
Warn whenever 'defined' is encountered in the expansion of a macro
(including the case where the macro is expanded by an '#if'
directive). Such usage is not portable. This warning is also
enabled by '-Wpedantic' and '-Wextra'.
This is enabled by default in llvm but not in gcc. Given that it is 'not
portable', lets disallow this in gcc and keep both compilers in sync.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
While running certain peci command, observed when FW attempts
to read last byte (Response FCS), PECI host controller returned
“Read FIFO” empty. Since “Read FIFO” is empty FW didn’t read
the response FCS.
Due to this issue, FW getting corrupted response from the PECI
controller for all the subsequent PECI commands.
To address this issue, FW waits for “Read FIFO” filled up by
the PECI controller.
Signed-off-by: Diwakar C <diwakar.c@intel.com>
This patch adds implementation of socket option used to get
protocol used for given socket (e.g. IPPROTO_TCP). This option
is not defined in POSIX, but it is Linux extension.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch adds implementation of socket option used to get
type of given socket (e.g. SOCK_STREAM).
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
All x86 QEMU boards have a hard-coded memory size of 9MB which
does not corresponding with what is defined in device tree.
So make use of CONFIG_SRAM_SIZE to provide correct memory size.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
QEMU provides multiboot information by default so we can
use the provided memory map to mark reserved physical
memory. Note that 64-bit requires Multiboot2 which
currently both Zephyr and QEMU do not support, hence
it's not enabled for qemu_x86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
