These are mostly cosmetic changes, shall work with firmwares
niko-0214 and niko-0215.
Change-Id: Id39c6b9cee6e759f77a05259632e453492ffe498
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Due to firmware update of NBLE starting from 02/12 revisions onwards
there is a need to sync RPC headers and functions.
Only to be used with above mentioned NBLE firmware!
Change-Id: Ifc2ce28f81e819bb517ef3891610d78089a00428
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
We should just discard the data if the received table index goes
beyond the actual table size.
Change-Id: I267621f098e349abab5a1f37f485a28448a9396b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The data is in a net_buf already so we can just pass this to the
deserialization code. The net_buf context and API helps simplify the
code quite a lot.
Change-Id: Iecb62d3151d229a09538ad652508f1eb9c6c3ffc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Applications may want to fine-tune the stack size of the fiber that's
used to make callbacks into the application.
Change-Id: I2cd3e79283fe85359389528e84d9bcc21e3e19f6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Don't require being able to read the full header in a single ISR call.
Instead track the number of received header bytes. Also check for IPC
length before allocating buffer to avoid unnecessary buffer
allocations.
Change-Id: I1678c3ac3aaf35a1b9bbe930cc2e942fce3f458a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This reverts commit 3c66686a43.
That commit fixed announcing ticks before the microkernel was up, but
prevented devices initializing before the MICROKERNEL level from having
access to the hi-res part of the system clock, which they could not poll
anymore.
Change-Id: Ia1c55d482e63d295160942f97ebc8e8afd1e8315
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Currently we have devices named "dw_spi_0" and "intel_spi_0" etc, which makes
it difficult for an application to look up. Or worse, forcing a 3rd party IP
to hardcode in support for only one specific IP block.
Change-Id: Ie485e2350b171b66b22cd7ab39e0fcd196f38af8
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Modifications to timer drivers and interrupt setup, to manage
the tickless idle for the x86 architecture
Change-Id: Ie02d484b7e5636de6ea382ba2eeed57e704c8498
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This is needed because in the microkernel, the system clock
is not yet running and the cc2520 driver needs that. By moving
the device initialization later, the clock gets to run and
the cc2520 driver works both in nanokernel and microkernel.
See also related commit 3c66686a43
for details.
Change-Id: Idc5530398b4cff2bb3e0955c8ab57c5f03344079
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows to decrease number debug messages using config option.
Change-Id: I987d25c6d4b18503d6beb7feab97e9207100323d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
We can take advantage of the net_buf headroom. At the same time move
the necessary definition straight into uart.c and remove any unused
definitions.
Change-Id: I932bba2cfb11808aabce7bad09e41f94d073bb5b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Using net_buf helps us remove a lot of the pointer & data length
book-keeping variables and in general makes the code more readable.
Change-Id: Iec870a3bacbb63b55329ef5214b0ee0a757f5b1e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This will prevent debug output to be printed if in case
CONFIG_BLUETOOTH_DEBUG_GATT is not defined.
Change-Id: I93be7ccbcf0a8eae5ecb54b174d6ed2d892673dd
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This option can be used to enable debug for GATT using the same option
as with HCI driver.
Change-Id: Ie2f2692422bc1e1f2a5504c60d90961261b53d17
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add printing local bdaddr to help with discovery.
...
on_ble_gap_read_bda_rsp (0xa80089a4): Local bdaddr: C3:40:54:C7:DE:B4
(random)
...
Change-Id: I19f8000b1029fdc839303203d6bac91ee76231ed
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Read and store local bdaddr, serialize command sequence.
Change-Id: Iea6a0e9d7dab3bbba04c26f47f07bc5d2527e9d7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Using rsp instead of par makes code more intuitive.
Change-Id: Ib6594e78f4c6d0088e66e9023a696ea42a2e1f4f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The buf pointer in cc2520_read() points to memory that will
hold the received data. It must not be used to set RSSI and
link quality values. Very difficult to find memory corruption
was seen as we were overwriting memory in other part of the
system. The fix was to set the RSSI and link quality variables
in read_packet() where the buf pointer points to proper memory.
Change-Id: I49bfe37f4c7ccc0f582f3aecdf73d5b3ea6bb4e5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove not used code and decrease number of log messages
Change-Id: I3a41fcc15d7f7b7e8802a13f6eb871794437a87c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Following changes in NBLE firmware update our RPC, shall be compatible
with firmware images building from 02/10.
Change-Id: Ifeb1193a241e9fea39c52a6c0f5bbd6c21041c08
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
BLUETOOTH_MAX_CONN option is maximum number of simultaneous Bluetooth
connections supported.
Change-Id: If9629f919ba76fbd2803852c325b357c742edd9a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
For example when writing to CCC descriptor it may give the impression
that a handle is being written twice when in fact it is just calling
a callback.
Change-Id: I7aca87a1678789547224ef8d64f1f6c55af8022d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Default cc2520/802.15.4 channel number is 26. Using Kconfig option
user will have chance to set different channel number between
11 and 26.
Change-Id: Id8f47ab5e328adae56e00adc6437c8ca8601a658
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The definition is not in sync with firmware which cause the following
error:
bt: rpc_deserialize (0xa8008a24): on_ble_gatts_send_notif_ind_rsp
panic: errcode -1
Change-Id: Iddaa1eece7c43b5707c01db6e053d104a2a846e6
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add read parameters to read callabck
Merge bt_gatt_read_multiple functionality into bt_gatt_read.
This makes it easier for application to handle all types of reads
as same sematics is kept for them.
Instead of destroy callback, call read_func with NULL data to
indicated that read has completed. This makes it clear when
read is completed and parameters used for it are no longer needed.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if read has completed. Since destroy callback
is no longer needed it is removed.
Also note that bt_gatt_read doesn't take any user data parameter
and that destroy callback was acctually called with read parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_read_params.
Change-Id: I8d6ea136b1e61c1dae73cca868b53c48c45a5492
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
With peripheral application there is at least 6 commands sent in a row
which will lead to 6 responses which might cause the driver to run out
of buffers so this increases it to 8 to align with HCI driver.
Change-Id: I7ecbc2cfbaf754c35466c57124ff87d27766a07b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some terminals (e.g. screen) don't seem to propagate carriage returns
through, creating the following kind of results when pressing enter in
a shell:
btshell>
btshell>
btshell>
btshell>
Fix this by always printing out '\r' when receiving a carriage return.
Change-Id: Ia5ce5612c9b830edc84619538dc17a654b6e805b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Part of making the device model work, is using a more generic name for
the devices. Currently the ADC uses 2 possible solutions, when it should
be using just one name for them all.
Change-Id: Id9b78b3edf234391819847bb9b8534747d7d4409
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
There can only be one instance of an ADC, but we have code setup for
multiple.
Change-Id: I94eae2450bdc6b138ebad66f80a7c451cefe32a9
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The ADC for DesignWare is currently setup to handle multiple dev entries,
but there only ever exists one. No reason to add to complexity for multiple
if there is only going to be one.
Change-Id: I0b77ef91160776dcf0aea1a50b144fff2b2be9e2
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Looking at all structs as to where we can pack them a little better, and
calling out the padding/stride at the end for future expansion.
Change-Id: I4a651092e950dd3d915af9fa0ee0d7d59803e58f
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
