Coverity does not understand syscall mechanism and will already
complain when any function argument is not of exact size as
uintptr_t. So tell Coverity to ignore this particular rule here.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Set `ROM_START_OFFSET` for SAMD5X series to match the value
calculated in the linker file after forced alignments in
`vector_table.ld`.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
This k_usleep(1) is a tick alignment, not a workaround. Simple
reword to avoid confusion.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Following master branch renaming to "main", update this script
to use $remote/main as base comparison branch
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit it to resolve following bugs:
* Operands don't affect result.
* Logical dead code in stm32_adc driver.
Above mentioned bugs were solved by adding parenthesis and
changed the method of comparing. Since comparison of ADC
channel_id with the channel may cause loss of value.
So instead of direct comparison, introduced a mechanism to
convert channel constant to a decimal using
__LL_ADC_CHANNEL_TO_DECIMAL_NB() and strips away
the INTERNAL_CH bit and then compare with channel_id.
fix:
* zephyrproject-rtos/zephyr#35130
* zephyrproject-rtos/zephyr#35136
Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>
Fixed several compilation errors that resulted from selecting
TRACING without specifying a tracing system (Tracerecorder,
CTF, Systemview). In this case (TRACING_NONE), some default trace hooks
(in tracing.h) were incorrectly named resulting in compilation errors.
The legacy sys_trace_isr_enter, sys_trace_isr_exit, and sys_trace_idle
also caused problems since these were only given as defines, resulting
in undefined reference errors since they are required by the assembly
files calling these. To solve this issue I've added a stub file
"tracing_none.c" (only compiled if TRACING_NONE) and declared the
functions in tracing.h if no tracing system is selected.
Signed-off-by: Torbjörn Leksell <torbjorn.leksell@percepio.com>
This commit makes CONFIG_EXCEPTIONS un-selectable for the architectures
that are known to have broken C++ exception handling support
(see #32448).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the filter for cpp.libcxx.exceptions test to allow
testing on all architectures except the ones that are known to be
broken (see #32448).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The `CONFIG_LINKER_SORT_BY_ALIGNMENT` config, which is enabled by
default, causes the sections containing C++ exception handling
information to be re-ordered for certain targets (in particular, the
64-bit arch targets). This effectively breaks the required "crtbegin.o
-> others -> crtend.o" order and causes the address of the
__EH_FRAME_BEGIN__ symbol to be invalid; thereby, causing C++
exception unwinding to fail.
This commit adds SORT_NONE property to these sections in order to
ensure that the linking order specified in the linker command line is
maintained.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
It was just making the code hard to read. Also it was not following
the code guideline because the type was not telling us the sign
and size.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
z_pm_core_devices was hack to set some priority between devices. It
was doing it hardcoding some devices that were the first to bring up
and the last to power down. Remove it and use the same list used to
initialize devices.
Fixes#34214
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
OpenThread expects the FCS field at the end of the ACK frame to be
passed with `otPlatRadioTxDone`.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Zephyr kernel masks interrupts before calling the SoC PM
sleep entry point. On the Cortex-Mx family this prevents
wake from peripheral interrupts. The SoC PM layer requires
interrupts to wake the SoC and must prevent the CPU from
vectoring to an interrup until PM exit. The SoC does this
by setting ARM NVIC PRIMASK to 1 and BASEPRI to 0. On
return to the kernel SoC sets PRIMASK to 0 allowing ISR's
to fire. In addition the MEC HW only clears its peripheral
sleep enables if the CPU vectors to an ISR. On wake we
clear the MEC PCR sleep control register which clears all
the peripheral sleep enables so peripherals will be active
before exiting the SoC PM layer.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
A few language fixes to the "Installing the documentation
processors" section.
Also adding comments to be able to include this section in
other locations.
Signed-off-by: Ruth Fuchss <ruth.fuchss@nordicsemi.no>
A few language fixes to the install dependencies section.
Also adding IDs to be able to link directly.
Signed-off-by: Ruth Fuchss <ruth.fuchss@nordicsemi.no>
In a primitive SYS_SLIST_FOR_EACH_NODE check for null was
after dereferencing. Place check for null of the "thread_spec_data"
before its dereferencing.
Found as a coding guideline violation (MISRA R4.1) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Not checking return code in fcntl can result in interpreting -1 as
flags, and cause unexpected behaviour.
Fixes#35541
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Add a tree node to group files under WORKSPACE so that
they won't be shown with full path. The WORKSPACE is
usually the same as WEST_TOPDIR unless ZEPHYR_WORKSPACE
is defined during build.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The list of symbols only contain visible symbols that can be
obtained through ELF file. There are code and data where
the toolchain never emits symbols for them and thus are not
visible in the list. So add a "(hidden)" node to the tree
to show they are there.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes how the tree is generated. Symbols with no paths
are now grouped together instead of scattering throughout
the tree. If paths in ELF file are not all under ZEPHYR_BASE,
it will create additional node groups as 2nd level. This is
useful when not all source files are under ZEPHYR_BASE, and
provides a better indications of where they are.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes how paths are stored in intermediate structures
so that full paths are stored. This makes it more consistent
with those structures to avoid an issue where some paths are
full paths, some are relateive to ZEPHYR_BASE.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds some common C++ file extensions so the script
can recognize those as source file, and display them in
different color.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This fixes the issues on import statements identified by pylint.
Also add docstrings for method and classes. Most of them are
already there as comments, so simply move them as docstrings.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Device won't reconnect automatically even if
AP station is available. This fix adds the carrier event, indicating
that network is present again enabling DHCP bound event.
Also, internal wifi event callback was added into wifi
driver to enable proper event handling.
Update west.yml to bring exposed wifi event callback.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Fixes#33843
Increasing ZTEST_STACKSIZE to 4096.
This ensures that the riscv32 platforms can succesfully execute the
C++ exception test cases.
Also add the following platforms to allow list:
- qemu_arc_em
- qemu_arc_hs
- qemu_cortex_m0
- qemu_cortex_m3
- qemu_cortex_r5
- qemu_riscv32
- qemu_x86
- qemu_xtensa
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes part of: #32448
This commit updates the CMake CMAKE_CXX_LINK_EXECUTABLE to include
crtbegin.o and crtend.o at the right locations when linking with gcc.
It also updates linker scripts to ensure proper location of the
exception header frame sections.
This ensure proper handling of exceptions for those architectures
- x86
- xtensa
- riscv32
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
* Remove driver categories that didn't have any major updates
* Add a first pass on new drivers that got added
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There was a verification function for can_set_bitrate calling a syscall
implementation. But, can_set_bitrate is not a syscall and does not need
to be because it is accessing the driver through other syscalls.
Fixes#34734
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
RTT_LOCK/UNLOCK in certain configuration creates code block (curly
braces). In that case variables declared inside are local to that
block. Moved declaration of ret variable before the block. Updated
code to ensure that RTT_LOCK/UNLOCK are in the same code block.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The current iso commands in the shell only supports setting up
a bidirectional stream or unidirectional for central role.
Adding rx/tx/rxtx option to iso listen command to allow for
peripheral side configuration of an iso connection.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
The sequence number is needed in the appliaction layer to detect lost
packets in the ISO stream in cases where the timestamp is not included.
(Sequence number is mandatory to include where timestamp is optional).
The API for the public metadata have been moved to a public header file.
As the size of the ISO meta data exceeds the default 4 octets net_buf
user_data the public ISO metadata have been moved into a seperate array.
The internal metadata is still stored in net_buf user_data.
This also fixed the user_data overflow on 32 bit systems, caused by
writing the ts into user_data on index 4 to 7, which is outside the 4
allocated bytes.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
For the native posix build the sleep calls used in tasks will stall
the zephyr instance which sets an upper limit on the data processing
interval to once every 20-30 millisecond.
This change reduces the duration of the sleep calls and increases the
TICKS_PER_SECOND to allow for shorter sleeps. This is needed to
support the data rates needed for LE Audio streaming. The rate is
tuned to support up to bidirectional 5ms ISO-intervals.
This change also increases the ISO buffer count from 1 to 5 to
allow for some buffering in the controller, which is needed for
gapless playback and/or use of burst number larger than 1.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
Microchip HAL 1.2.0 fixed a bug in the define of GPIO
control register MUX field. The incorrect MUX defined
cleared by GPIO input pad disable field by accident.
After the MUX definition was corrected the pinmux driver
must be modified to mask off the input pad disable for
the pin to be operational.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Add list of new SoCs and ARM boards added in this release. (Folded the
STM32 board section into the ARM board section).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update overlay file for nucleo_l552ze_q_ns board,
since now the sample does not enable REGRESSION,
and thus regular TF-M flash layout for the board
is used.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The flash layout definition has changed in upstream TF-M for the
LCPXPRESSO55S69 platform, for builds without bootloader. Fix the
layout in the boards' configuration, as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Removes the dependency on the external test service from the
CONFIG_TFM_REGRESSION_S test suite, instead
demonstrating how to make direct IPC calls to the CRYPTO
service that is available as a part of standard TF-M builds.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
The TF-M update brings in the latest PSA crypto headers,
after TF-M switched formally to MBedTLS 2.26.0. It also
brings in some important fixes for cache enabling in nRF
platforms.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
After the ARM/ARM64 split the SDK 0.12.4 is needed to be able to compile
the ARM64 arch code. Bail out if an old SDK is detected at compile time.
Also change the minimal supported Zephyr SDK to v0.12, as agreed in
Toolchain WG. Main reason is added compiler architectures and important
inclusion of fixes, for example qemu and arm fixes for veneers (TFM)
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
