The openocd flash runner now expects a hex file, so always build a HEX
image if the runner is set to openocd.
Fixes#18181
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit fixes following issues in printf formatting
- cast values of type off_t to long to remove warnings generated when
compiling with Newlib and CONFIG_IMG_ERASE_PROGRESSIVELY is enabled
- cast values of type off_t always to long and not u32_t
- use 'z' modifier (as in "%zu") to print values of type size_t
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
When the database changes and a client becomes change unware it should
also clear the out of sync flag as the following request should return
an error:
Core Spec 5.1 | Vol 3, Part G, 2.5.2.1 Robust Caching:
'The error response is sent only once after the client becomes
change-unaware, unless the client disconnects or the database changes
again before the client becomes change-aware in which case the error
response shall be sent again.'
Fixes: #18183
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the following crash:
ASSERTION FAIL [0] @ ZEPHYR_BASE/subsys/logging/log_core.c:180
argument 2 in log message "%s: Stored CCCs for %s (%s)"
missing log_strdup().
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The HAL/SDK code for imx6sx utilizes floating point support in
CCM_ANALOG_GetPllFreq function which is utilized by drivers to determine
clock information. As such we should enable hardware FP support by
default so we don't get pure soft-float emulation and pull in a bunch of
extra code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a band-aid to make it more obvious to potential users of 'west
sign' and 'west flash' which hex file they are flashing, when they are
falling back on a binary file, and erroring out when a hex file does
not exist.
Fixes: #18201
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This commit enables the pullup on CAN0_RX pin (PORTB 19).
The pullup ensures that the CAN controller initializes even
without a transceiver connected.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Apparently the tests/lib/sprintf test requires more than 34kB
of code size, when building in MCIMX7_M4-based platforms. Such
platforms, however, only have 32kB of code memory, therefore,
we exclude them from this test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix issue unable to connect to bonded peer when host resolution is used
either because the controller does not support privacy, or the
controller resolving list was exceeded.
In this case we need to use the RPA from the advertising report
directly, there is a small chance of the peer cycling the RPA here, in
which case the connection might be unsuccessful.
Bug introduced here: 45da629b24Fixes: #18306
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
now we use hex file instead of elf file for flash command as
PR #17822 suggested, so enable BUILD_OUTPUT_HEX by default for
board sam_e70_xplained.
Fixes: #18181.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
CONFIG_MAIN_STACK_SIZE was originally 1344 in this test. The following
commit removed setting the stack size in the test:
commit 7b3cd7d371
Author: Cami Carballo <cami.carballo@intel.com>
Date: Fri Jul 26 10:59:16 2019 -0400
tests: net: increase stack size
However getting the default stack size on FRDM-K64F of 512 causes the
following panic:
FATAL: ***** BUS FAULT *****
FATAL: Stacking error
FATAL: Imprecise data bus error
FATAL: NXP MPU error, port 3
FATAL: Mode: Supervisor, Data Address: 0x20002ff0
FATAL: Type: Write, Master: 0, Regions: 0x8200
FATAL: r0/a1: 0x00000000 r1/a2: 0x00000000 r2/a3: 0x00000000
FATAL: r3/a4: 0x00000000 r12/ip: 0x00000000 r14/lr: 0x00000000
FATAL: xpsr: 0x200002f4
FATAL: Faulting instruction address (r15/pc): 0x00000000
FATAL: >>> ZEPHYR FATAL ERROR 2: Stack overflow
FATAL: Current thread: 0x2000182c (main)
FATAL: Halting system
Bump stack back to original 1344 fixes the issue.
Fixes#18292
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The sys_mutex test doesn't seem to fit in 24kB of RAM anymore,
when building with user mode support (CONFIG_USERSPACE=y). We,
therefore, restrict it to platforms that have 32KB or more of
RAM. We also filter the test with ARCH_HAS_USERSPACE explicitly.
The alternative setup of the sys_mutex test, i.e. without user
mode support (CONFIG_TEST_USERSPACE=n) continues to build for
platforms with less than 32k of RAM.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The command for generating offsets.h has only been depending on the
target for offsets.c.obj, and not the file offsets.c.obj itself. Both
are needed, as explained in "CMake: dependencies between targets and
files and custom commands"[0].
This patch adds the dependency and fixes#18301
[0] https://tinyurl.com/y2hgzjhx
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Reduce the RAM usage in two of the Bluetooth samples in order for them
to fit in the BBC Microbit's RAM.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Disable Advertising Extensions by default, since they are not really
operational and they take RAM.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When compiling a sample like a beacon, none of the `if defined()`
statements in the switch case are actually compiled in, so the compiler
complains of an orphan mem_release();break; sequence.
Add a type that we know will always be compiled in in order to avoid
this issue.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When in Low Power mode an LPN may receive messages sent by nodes other
than its friend during its brief receive window. These messages get
rejected by the transport layer. At some point in the future the LPN
will receive these messages from its friend, however they will have
already been added to the network message cache earlier.
When the transport layer rejects a message due to it being received from
a non-friend node while in Low Power mode it must be removed from the
network message cache so that it can be correctly received from its
friend in the future.
Fixes#17809
Signed-off-by: Rich Barlow <rich@bennellick.com>
The commit 1c7b668804 tried to fix
resending segments to the GATT bearer, however it got the buffer
refernce counting wrong. The bt_mesh_net_resend() function doesn't
own a reference to the buffer, i.e. it's not responsible for unrefing
it. E.g. bt_mesh_adv_send() takes its own reference.
What was missing however was the handling of the callbacks. Use the
recently introduced send_cb_finalize() helper to make sure they're
called.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are several places that require the send callbacks to be called
immediately. Reduce the code a bit by introducing a helper for this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The RPA timer should always be running, even with privacy supported by
the controller. In order to select an IRK to generate the private
the controller is instructed by provided an identity address.
If we want to advertise privately without providing an identity address
the host has to set the private address.
Fixes: #18150
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Several advertising options were not being picked into the
documentation due to missing doxygen markers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a dedicated entry for Bluetooth Mesh, and include Trond from
Nordic as an owner, since he will be actively participating in
maintaining & developing the code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When coming out of an exception, we need to mask interrupts
to avoid races when decrementing the nested count. Move
the instruction that does this earlier.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
'interrupt-parent' should contain just the phandle of the node
interrupts are sent to.
This node (gic: interrupt-controller@f9010000) doesn't generate any
interrupts, so the 'interrupt-parent' value is never used (this is why
it wasn't caught). It'll give an error later with 'interrupt-parent'
declared as 'type: phandle' in bindings though.
Don't know what was intended. Just remove the 0.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Mark the 'reset-gpios' property as optional. It was incorrectly set
as required and its not required for the driver to function.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The Mesh Profile Specification states in section 3.10.5 IV Update
procedure: "The IV Update procedure is initiated by any node that is a
member of a primary subnet", meaning if we're not on the primary
subnet we should not try to initiate the procedure.
Additionally this fixes initiating IV Update in all cases where the
sequence is updated, by putting the code into bt_mesh_next_seq().
Fixes#17977
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This branch is inherited from old code that used to start the timer as
soon as a message was queued for transmission rather than when it was
actually transmitted (the case today). It'll also cause a race in case
the publication goes over the GATT layer since the "sent" callback
happens synchronously in that case.
Fixes#17821
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a check to make sure the hex file exists as that is what we utilize
in openocd to flash. If its missing we report that its likely due to
not having CONFIG_BUILD_OUTPUT_HEX set.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The GATT bearer is a reliable one so there should theoretically never
be a need to resend segments. If however for some strange reason the
proxy client doesn't immediately ack all segments we should do the
resending on the GATT bearer, rather than sending them over
advertising.
Fixes#17907
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add additional masking of the pins with fired callback triggers
against the currently enabled callbacks, in order to not call
handlers for callbacks that got disabled in some other callback
handlers that were called in the same ISR execution.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The code was incorrectly bailing out with "return 0" rather than
continue. Also, it was incorrectly making a reference to
tx->seg[seg_o] since when a PDU goes through the friend queue we don't
use the usual retransmission mechanism.
Fixes: #17932
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In case a queued buffer is canceled before sending we have to unref
it, since that's what adv_send() would do as well.
Fixes#17936Fixes#18013
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Mesh Profile 3.6.7.2 Publishing Heartbeat messages:
"
Triggered publishing of Heartbeat messages is enabled by
the Heartbeat Publication Features state (see Section 4.2.17.5):
...
- If the Low Power bit is set to 1, a Heartbeat message shall be
published when the node establishes or loses Friendship (see Section
3.6.6.1).
"
Fixes#18194
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When sending heartbeat messages triggered by feature changes the code
was trying to look up the configured publication subnet, in an
apparent attempt to figure out if publication is enabled or not. A
more appropriate way is to check for the heartbeat publication
destination address, and since we have a helper function this can be
done in a single place.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The heartbeat is a transport layer feature, so move it to transport.c.
This also opens the way to properly fix Friendship-established/lost
triggering for LPN role.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With CONFIG_LOG_IMMEDIATE, log output is printed immediately. If a
shell command is in progress, there's no prompt to erase, nor should
we print a new prompt after the log message is output.
Before this patch, a simple shell command like:
int cmd_log_erase(const struct shell *shell, size_t argc, char **argv)
{
LOG_INF("hello world");
return 0;
}
would output something like:
uart:~$ log erase
[00:00:02.623,718] <inf> cmd_log: hello world
uart:~$ loguart:~$
This patch fixes prompt handling while a command is active, and fixes
put_sync_hexdump to behave like put_sync_string.
Signed-off-by: Jim Paris <jim@jtan.com>
IPv4 connection management status is stored in wrong
variable. ip_state should hold the status and then
it should be stored in state variable.
Fixes#18253
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Fix missing interval min copy in bt_conn_set_param_le. Application is
unable to override BT_GAP_INIT_CONN_INT_MIN for interval_min.
Fixes: #17789
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
modem_socket_put() originally took an index as a parameter and was
later swapped to sock_fd as the reference.
The internal code was never updated to reflect that sock_fd isn't an
index -- it's a separate reference generated via z_reserve_fd().
Let's correct the modem_socket_put() logic.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/18238
Reported-by: Tobias Svehagen <tobias.svehagen@gmail.com>
Signed-off-by: Michael Scott <mike@foundries.io>
The detach function didn't call FLEXCAN_TransferAbortReceive.
The state of the mailbox after detaching was still kFLEXCAN_StateRxData
and therefore a new filter couldn't be attached.
This PR calls FLEXCAN_TransferAbortReceive and releases the mailbox.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
The callback function and callback argument were not set when the
filter is attached, and therefore, the callback function was never
called. This commit sets the function and callback correct.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
We are trying to pass 64-bit value to the driver, but we only
allocate space for an integer. This will not work and will cause
invalid memory access.
Fixes#18205
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
