Changes the local network interface to exclusively handle packets for
the local interface, duplicating the buffers in the process.
The loopback mechanism now operates its own packet pool for the local
interface queue. The loopback is moved ahead of encryption, allowing the
local interface packets to go back up the stack without network crypto,
saving a full round of encrypt/decrypt for self-send.
Packets for group addresses the local node subscribes to are now
duplicated, with one unencrypted variant going into the network
queue, and the network bound packets following the regular path to the
advertiser.
Introduces one new configuration for setting the number of loopback
buffers.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The hardcoded value was arbitrary and interfered with message cache
mechanism causing invalid behavior and PTS test to fail.
Fixes MESH/NODE/RLY/BV-02-C.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
According to Mesh Profile Test Specification we should still
relay messages with DST address that is RFU.
Fixes MESH/NODE/RLY/BV-01-C.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Allocates segmented message buffers as slabs in a common pool for RX and
TX. This reduces memory requirements for both TX and RX, as TX messages
can be stored without the network and advertising buffer overhead, and
RX can use only the slabs it needs, instead of allocating a full size
segmented message. This approach also removes the need for decrypting
the segments for each retransmission, reducing overall processing load.
Slab based segmentation for tx also introduces queuing of segmented
messages, which allows the application layer to send multiple messages
to the same destination without violating Bluetooth Mesh specification
v1.0.1, section 3.6.4.1. This mechanism is provided through a flag that
blocks segmented messages to a destination which a message is already
being sent to until the previous message finishes.
This changes the SDU size configuration to a symmetrical
RX_SEG_MAX/TX_SEG_MAX pair of configurations, plus a new segment pool
side configuration. It also removes the binding between the TX_SEG_MAX
config and the advertising buffers, reducing the minimum advertising
buffer count from 6 to 3.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Changes the behavior of the message cache to optimize for cache
capacity. Previously, the message cache's primary function was to avoid
decrypting messages multiple times, although the cache's main function
in the spec is to avoid message rebroadcasting. Optimizing for minimal
decryption causes us to fill the network cache faster, which in turn
causes more cache misses, potentially outweighing the advantage.
Now stores src + seq in message cache instead of field hash value. This
cuts cache size in two, while including more of the sequence number than
before.
Adds messages to the cache only after the packet is successfully
decrypted. This reduces noise in the cache, and ensures that no
invalid deobfuscations are added.
Additionally, this fixes a bug where multiple calls to net_decrypt with
the same packet failed, as the message cache found its own entry from
the previous call.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Resend transport segments for groups on the advertiser interface, even
if a connected proxy node holds the group.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Backport of https://github.com/apache/mynewt-nimble/pull/724
Mesh spec 1.0.1 changes proxy disabling behavior to only affect the
relaying from proxy nodes. Previously, disabling proxy would shut down
all proxy and node activity.
Tweaks from the original commit:
- Removed redundant call to bt_mesh_adv_update() in gatt_proxy_set()
- Removed invalid ref to 4.2.11.1 in node_identity_set()
---
According to Mesh Profile Spec 1.0.1, Section 4.2.11:
"If the Proxy feature is disabled, a GATT client device can connect
over GATT to that node for configuration and control. Messages from
the GATT bearer are not relayed to the advertising bearer."
Moreover some notes have been removed from the spec compared to
version 1.0:
Mesh Profile Spec 1.0, Section 4.2.11:
"Upon transition from GATT Proxy state 0x01 to GATT Proxy state 0x00
the GATT Bearer Server shall disconnect all GATT Bearer Clients."
"The Configuration Client should turn off the Proxy state as the last
step in the configuration process."
Mesh Profile Spec 1.0, Section 4.2.11.1:
"When the GATT Proxy state is set to 0x00, the Node Identity state
for all subnets shall be set to 0x00 and shall not be changed."
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Refactor the handling of network nodes and their keys into a separate
Mesh Configuration Database (CDB). This, not only creates a separation
of the local node and the other nodes, but also makes it possible to
implement functions to manage the whole, or at least parts of the mesh
network.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
Use 24-bit functions for byteorder and net_buf in order to make the
byteorder used more readable.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Make it possible to provision devices over advertising bearer (PB-ADV).
Many messages in the provisioning protocol are the same for provisioner
and device so much of the code could be reused by only changing when
they are expected to arrive.
This introduces to concept of local and remote device keys. The models
for cfg_cli and cfg_srv have been updated to reflect this concept. Both
the send and receive path in the transport layer have been updated to
support encrypting/decrypting with local and remote device keys.
When a node has been provisioned it is stored in bt_mesh_net.nodes. If
CONFIG_BT_SETTINGS is enabled, they are also saved to settings. If the
callback node_added in bt_mesh_prov has been set, it will be called for
every node that gets provisioned. This includes when they are retrieved
from settings.
The configuration CONFIG_BT_MESH_NODE_COUNT controls how many nodes that
can be provisioned.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
Provides utility function for parsing network headers outside of the
network layer. The primary intended use-case is friendship.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Static variables and functions don't need #ifdefs if the code calling
them is using IS_ENABLED(). If IS_ENABLED() evaluates to false the
compiler will strip out all the static entities.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix calling bt_hex and bt_addr_le_str multiple times in the same logging
call could result in string overwritten since log_strdup is not
guaranteed to duplicate the string buffer in all logging configurations.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When in Low Power mode an LPN may receive messages sent by nodes other
than its friend during its brief receive window. These messages get
rejected by the transport layer. At some point in the future the LPN
will receive these messages from its friend, however they will have
already been added to the network message cache earlier.
When the transport layer rejects a message due to it being received from
a non-friend node while in Low Power mode it must be removed from the
network message cache so that it can be correctly received from its
friend in the future.
Fixes#17809
Signed-off-by: Rich Barlow <rich@bennellick.com>
The commit 1c7b668804 tried to fix
resending segments to the GATT bearer, however it got the buffer
refernce counting wrong. The bt_mesh_net_resend() function doesn't
own a reference to the buffer, i.e. it's not responsible for unrefing
it. E.g. bt_mesh_adv_send() takes its own reference.
What was missing however was the handling of the callbacks. Use the
recently introduced send_cb_finalize() helper to make sure they're
called.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are several places that require the send callbacks to be called
immediately. Reduce the code a bit by introducing a helper for this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Mesh Profile Specification states in section 3.10.5 IV Update
procedure: "The IV Update procedure is initiated by any node that is a
member of a primary subnet", meaning if we're not on the primary
subnet we should not try to initiate the procedure.
Additionally this fixes initiating IV Update in all cases where the
sequence is updated, by putting the code into bt_mesh_next_seq().
Fixes#17977
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The GATT bearer is a reliable one so there should theoretically never
be a need to resend segments. If however for some strange reason the
proxy client doesn't immediately ack all segments we should do the
resending on the GATT bearer, rather than sending them over
advertising.
Fixes#17907
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We've already got GATT services in subsys/bluetooth/services so
subsys/bluetooth/mesh is a more natural place. Aditionally this aims
to fix the Kconfig dependencies to be able to use mesh together with
BT_CUSTOM (i.e. a custom, potentially non-HCI, host stack).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2019-07-10 09:41:57 +03:00
Renamed from subsys/bluetooth/host/mesh/net.c (Browse further)
