Add definitions of PWM peripheral instances so it can be utilized
on nRF54H20 and nRF54L15 devices.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Updated hal_nordic revision contains fix that allows the PWM
on nRF54H20 and nRF54L15 devices to work.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
The valid range of hdop (horizontal diffusion of precision) goes
from 0-100000, but because we are using a uint16_t, we truncate
anything above UINT16_MAX.
This fix changes the size of the hdop member to a uint32_t, which
allows us to capture valid (but admittedly very poor) readings.
Signed-off-by: Rob Newberry <rob@zenomoto.com>
240MHz as APB3 bus clock is too fast to set I2C base bus speed.
Set bus pre-scaler to 2 and reach a safe 120MHz.
This commit is very similar to
456183f982.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Running out of connection contexts is most likely due to app
misconfiguration, therefore it's useful to get an explicit information
that context allocation failed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Moves a Kconfig that appears everywhere in the wrong place so that
it is enclosed if if statment check, so it only shows for device
that have the driver enabled
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add "RaspberryPi Pico to UNO FlexyPin Adapter".
It is a converter-PCB to Arduino UNO form-factor
from Raspberry Pi Pico that is released in Open Source Hardware.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
The cap_initiator unicast_stop command will now stop
all streams by default, without supplying the "all" argument.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some part of the descriptions were wrong. Also, the description of
`BT_BUF_ACL_RX_SIZE` was too verbose and no longer needed with the
updated L2CAP documentation.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add simplistic booting method which allows to run
applications without the 2nd stage bootloader.
- introduce memory layout header file
- update and optimize default and mcuboot linker scripts
- remove building multiple binaries during the application build
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add simplistic booting method which allows to run
applications without the 2nd stage bootloader.
- introduce memory layout header file
- update and optimize default and mcuboot linker scripts
- remove building multiple binaries during the application build
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add simplistic booting method which allows to run
applications without the 2nd stage bootloader.
- introduce memory layout header file
- update and optimize default and mcuboot linker scripts
- remove building multiple binaries during the application build
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add simplistic booting method which allows to run
applications without the 2nd stage bootloader.
- introduce memory layout header file
- update and optimize default and mcuboot linker scripts
- remove building multiple binaries during the application build
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add simplistic booting method which allows to load without 2nd stage
bootloader.
Update common architecture loader to support all build scenarios.
- simple boot: using single binary application without bootloader
- mcuboot: zephyr port of MCUboot
- application: loaded by the MCUboot
Signed-off-by: Marek Matej <marek.matej@espressif.com>
- update the console configuration defines references
- add missing header file with flash capabilities
- replace all console wait-until-ready calls by single one
Signed-off-by: Marek Matej <marek.matej@espressif.com>
This commit adds a small overview over resources
related to LE Audio, both Zephyr specific and
general information from the Bluetooth SIG.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some of the services have some unique points worth knowing
as both a contributor and an application developer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
