Current implementation checks for pulldown and
pullup. As pinmux configuration is related to PU only,
this PR checks for PU feature instead of PD.
This also fix missing PU check when PD is present.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Currently if an attempt to disable CSMA-CA in by setting an
appropriate flag in another (for example application)
CmakeLists.txt it caused lots of warnings. This fix allows
higher level CMakeLists.txt to disable CSMA-CA without
warnings.
Signed-off-by: Artur Hadasz <artur.hadasz@nordicsemi.no>
When a Seed error occurs during the random nb generation,
the driver tries to recover and exit without providing a random data
This avoids looping endlessly on the DRDY bit of the RNG status reg
because it remains 0 in case of error.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Allow movement detection to be used on hardware
that only has one interrupt line connected.
Change hardware configuration to a bitmask.
Signed-off-by: Andrew Hedin <andrew.hedin@lairdconnect.com>
Rename CONFIG_SOC_POWER_MANAGEMENT_TRACE to CONFIG_NPCX_PM_TRACE so that
it is clear that it's a NPCX specific option.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The ADC driver of IT81302 chip can support channels 0-7 & 13-16.
This PR adds to implement ADC channels 13-16.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Fix a couple of issues reported by checkpatch:
ERROR:POINTER_LOCATION: "(foo*)" should be "(foo *)"
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add kinetis pinctrl driver. Driver initializes clocks for each port, and
exposes the pinctrl_configure_pins function required for pinctrl
support.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The Bluetooth HCI driver based on the RPMsg transport now uses the IPC
service module. The compatible Bluetooth sample - HCI RPMsg - has also
been migrated to the new IPC solution.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Add a new API to support multipart hash calculation. The API allows
split the data input to be split in small chunks.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The API to set a callback has the namespace cipher but the driver
function pointer was using the namespace crypto. As this API belongs
to the cipher subgroup, just rename the function pointer in the driver
to be consistent.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Just give a better name to this file since now we have changed the
file where crypto driver API is defined.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This file defines the crypto driver API, cipher is supposed to be just
one type of capability (other can be hash) of these drivers, just
change the file name to be consistent with it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add 'cipher' namespace in some in the driver API since these
operations are for cipher.
Set a namespace to make it clear that these are cipher operations,
this allow further functionalities, like hash, to be added in this
driver API.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The `gpio_dt_spec` structures where never initialised, therefore the driver
would always fault with "E: Reset GPIO device not ready" printed to the
console.
Fixes: 069bf6be44
("drivers: display: st7789v: use gpio_dt_spec")
Signed-off-by: Casper Meijn <casper@meijn.net>
Intel Audio DSPs have "IPC" interrupt delivery and shared memory
window hardware. The Sound Open Firmware project has historically
used the combination of these to implement a bidirectional
message-passing interface. As it happens, this protocol is an
excellent fit for Zephyr's somewhat geriatric but still useful IPM
interface.
This implements a SOF-protocol-compatible transport that will
hopefully prove a bit more futureproof for non-Intel SOF
architectures. It is a software-only device, built on top of the
underlying SOC APIs for the SRAM windows (in cavs-shim) and IPC
(cavs_ipc).
Note that SOF actually has two protocol variants (ipc3 and ipc4): in
both, the command header (passed as the "id" parameter in IPM) is sent
via the hardware doorbell register. But in ipc4, the second hardware
scratch register is used to transmit the first four bytes of the
command before involving the SRAM window (in ipc3, it's ignored).
Both modes are supported by this driver, set IPM_CAVS_HOST_REGWORD to
choose the "ipc4" variant.
Finally: note that the memory layout for the windows in question is
inherited from SOF, and for compatibility (with both SOF and with the
offsets used by the host!) these can't be changed without major
surgery. They're defined in kconfig, but should be treated as
read-only until we get a chance to rework the way Zephyr does its SRAM
window management (and probably in concert with the host drivers).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Some IPM devices support asynchronous command processing, where
acknowledgment of an IPM message can be delayed while handling
happens in a context other than the ISR that invoked the callback.
Expose this via a kconfig that can be selected by the driver, and add
a new "complete" call (a zero-overhead stub on non-supporting devices)
to signal the end of message handling.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Improve shell commands to support up to 32-bit addresses.
The check if function should use 8/16/24/32-bit address is basing
on the length of address used in function parameter. To address
registers below 256 using 16-bit, one should write them left-padded
with zeroes. Address is sent in big endian.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
The tx_lock timeout is closely related to GSM_CMD_AT_TIMEOUT
& GSM_CMD_SETUP_TIMEOUT, and should be longer than both of
them, otherwise the gsm_ppp_stop might fail to lock the tx.
Define the timeout at the top of the driver and added a comment
to make it clear for the user.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The rssi_work_handle always exists in the gsm struct, so use
```
if (IS_ENABLED(CONFIG_GSM_MUX))
```
instead of
```
#if defined(CONFIG_GSM_MUX)
```
for better code readability.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
There's no need to cancel rssi work when CONFIG_GSM_MUX isn't
enabled, since it is not scheduled.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The rssi_work_handle should be submitted to the gsm workqueue
using the gsm_work_reschedule, fix that.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The 'attached' flag should be reset on gsm_ppp_stop, or else
some part of the gsm_finalize_connection won't be executed
during the next gsm_ppp_start.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Convert gsm_finalize_connection into a work so that the caller
work won't have to run again when gsm_finalize_connection
reschedule gsm_configure_work on error.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Currently the mux_setup set the state to the next one after
uart_mux_alloc is successful even if the mux_setup fails which
can be a problem.
Set the state after both mux_setup & uart_mux_alloc are
successful.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Remove redundant mux_enabled checks, the code execution will
not reach here if mux_enabled is false in the first place.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Customize the error logs in each connection finalization steps
so that it is easier to trace the error.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The gsm_configure will return if it fails to perform mux_enable,
therefore the disable part of the log will not be printed.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The `setup_done` and `mux_setup_done` aren't being used
anywhere in the driver, therefore should be removed.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
