This fixes an always false evaluation of the gpio I/O direction
This issue was reported by Coverity
Coverity-CID: 151978
Change-Id: I93ec3319a3f18d564c961a5cbd9dcc9c60efbeb7
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The GPIO_INT_ACTIVE_LOW value is zero so the mask assignement is
never executed. Using the bit complement GPIO_INT_ACTIVE_HIGH the
proper mask is assigned
This issue was reported by Coverity
Coverity-CID: 151966
Change-Id: Ibc7d2e4c3ebee249b5ab9719f8177cc14c0d1d33
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This fixes an always false evaluation of the gpio I/O direction
This issue was reported by Coverity (CID 150821).
Change-Id: I6c0e9fe405cbd3e35454a81754fa0b1c721691f0
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This fixes an always false evaluation of the gpio I/O direction
This issue was reported by Coverity
Coverity-CID: 151833
Change-Id: Ie952d6f50c0383d5631325b69e8e8b234c67c4b8
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This fixes an always false evaluation of the gpio I/O direction
This issue was reported by Coverity
Coverity-CID: 151834
Change-Id: I033e368b2e91d888f2e8a797490df757513c3906
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This patch addresses the following issues:
* Aligns the Kconfig code style with Zephyr projects requirements.
* Removes redundant "depends on" from Kconfig.
* Adds static to the gpio_dw_isr declaration.
* Adds guards to the header files.
Change-Id: I1ae70868f0bda97891cbeb494e5efba1bd537aa1
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch addresses the following issues:
* Aligns the Kconfig code style with Zephyr projects requirements.
* Removes redundant "depends on" from Kconfig.
Change-Id: I4c8df0999f92a834d4023ce5856a2a6c39797c00
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch removes a redundant "depends on" from the gpio Kconfig for
nRF5X family.
Change-Id: I28ac15b58839e05f47ade81bef66a03a0a44bebd
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch addresses the following issues:
* Aligns the Kconfig code style with Zephyr projects requirements.
* Removes redundant "depends on" from Kconfig.
* Adds static to the gpio_sam3_init declaration.
Change-Id: If5c8a1822d6c116ea34d0f220f3e5fa359b6fa18
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Use unified kernel APIs and align syntax after function name changes.
Change-Id: I028f4faeaf33e28197d5f705063459188272027d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit updates the gpio_qmsi_ss driver by adding save/restore
context functionality for power management, using the corresponsing
QMSI APIs.
Jira: ZEP-665
Change-Id: I5d8b6050f5b099678b7e6d9144907ea2ce2dda4b
Signed-off-by: JuanX Solano Menacho <juanx.solano.menacho@intel.com>
The driver is currently used only by the ARM Beetle platform.
Jira: ZEP-1245
Change-Id: I6611edd7486a3c6d82d66a9a96c5d4860dad1539
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
PRIMARY, SECONDARY, NANOKERNEL, MICROKERNEL init levels are now
deprecated.
New init levels introduced: PRE_KERNEL_1, PRE_KERNEL_2, POST_KERNEL
to replace them.
Most existing code has instances of PRIMARY replaced with PRE_KERNEL_1,
SECONDARY with POST_KERNEL as SECONDARY has had a longstanding bug
where the documentation specified SECONDARY ran before the kernel started
up, but actually ran afterwards.
Change-Id: I771bc634e9caf7f17dbf214a270bc9967eed7d32
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's unused anywhere and unlikely to be in the future.
Change-Id: I57926e91da7d31ef6ddda4f86e6dac103dbfa176
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit updates the gpio_qmsi driver by removing the temporary
Zephyr save/restore context implementation and using the new QMSI APIs.
Jira: ZEP-999
Change-Id: Ic7b80a8f86baa7a6be11c93bbdebb18a102b0221
Signed-off-by: JuanX Solano Menacho <juanx.solano.menacho@intel.com>
For AON peripherals on Quark SE C1000, an API is needed
to retrieve the interrupt status after wake up.
This enables the application to know the wake source before
enabling again the interrupts.
Add this API to the gpio as this is a wake event
on Quark SE C1000.
Jira: ZEP-1188
Change-Id: Icc4aa6617bf18402b7e5dc3aab779ec2964e1c5b
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
The GPIO and AON GPIO ports are available to both the x86 and ARC
cores, but the driver always assumed only the x86 at the time of
configuring interrupts.
Use the available macros to set the correct values independently of
which core it's being built for.
Jira: ZEP-1030
Change-Id: I310afcc48780fbe1cac9dc3368a6de11bd797fda
Signed-off-by: Iván Briano <ivan.briano@intel.com>
The SoC level peripherals are accesible by both cores, while the SS
ones are only available to the sensor subsystem. Since the ARC core can
make use of both drivers at the same time, we need to be able to
differentiate their configuration values somehow.
Also disable the SoC GPIO for the ARC by default, as it still needs
more changes to be usable.
Jira: ZEP-1030
Change-Id: Ic5415c404ecd32a3e560467b6f5eaa873a515d72
Signed-off-by: Iván Briano <ivan.briano@intel.com>
The callback from the QMSI driver now can take a data pointer to pass
to the given function, so use that to pass the device to our callback
instead of defining one function for each supported port.
Change-Id: I82d863314e0443b7c4a12d4a9ad763b9634ca8e2
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Update the QMSI drop we maintain in Zephyr, and fix the build where
needed:
- QM_SCSS_INT is renamed to QM_INTERRUPT_ROUTER;
- every member of QM_INTERRUPT_ROUTER was renamed as well;
- QM_IRQ_* renamed too, mostly added _INT at the end;
- some isr functions were renamed to keep their names consistent;
- build for x86 needs to define QM_LAKEMONT, as QM_SENSOR was for ARC.
Change-Id: I459029ca0d373f6c831e2bb8ebd52402a55994d1
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Implements MCU-specific GPIO input interrupt integration. Added
definition of System configuration controller as well as its needed by
the GPIO code.
The SYSCFG controller is used for system-specific configuration such as:
- remap the type of memory accessible at address 0x00000000
- manage the external interrupt line connection to GPIOs
- configure the I/O compensation cell
Change-Id: Id2ebfbd1b21e77be76406d1cd6cd5d4989e9e2fa
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
STM32F4 requires the alternative function config to be set, so just
initialize that as part of the gpio configure call.
Change-Id: I33a4a8efec59c5ebe7dc3f3580f0dd2bf7ded7f4
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Make default value compatible with both nRF51 and nRF52.
Change-Id: I65dafbdf8518103becdd7388e9c0195ef1c4460d
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
