This is generating lots of duplication and unnecessary builds when
multiple arches are being changed. Let's stick to basic coverage which
should be enough for PRs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add additional time defines to round out the `SEC_PER_*` family.
These are easier to type than `SEC_PER_MIN * MIN_PER_HOUR` and
`SEC_PER_MIN * MIN_PER_HOUR * HOUR_PER_DAY`.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Mention that CONFIG_NATIVE_APPLICATION &
CONFIG_NATIVE_SIM_NATIVE_POSIX_COMPAT have been deprecated.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This option existed only to make the transition from native_posix to
native_sim easier. As native_posix is going to be removed in v4.2
we deprecate this option now, so it will also be removed.
We also switch this option to default to false already now.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This option is used in tree only by native_posix, which is deprecated
and being replaced by native_sim. But may be used also in out of tree
targets.
As part of the native_posix deprecation, and therefore the lack of
testing this feature would have in the future, we are also deprecating
this option.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This revert the idea of 3fa7d78 from #78845.
The 3rd level IRQ APIs won't compile when
CONFIG_3RD_LEVEL_INTERRUPT_BITS=0.
Updated testcase accordingly.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
This board has a few issues handled by this PR:
- Fix DTS entries to meet necessary flash partitions
- Fix wrong kconfig entries realted to SoC model
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Do not fail if we can't download any artifacts, i.e. when job is
cancelled.
Only publish on push/schedule
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a compliance test using ruff, for both linting and formatting of
newly added python files.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add simple scripts to convert ruff check and ruff format output to
toml exclude sections.
These sections can be used to ignore baseline violations for an existing
codebase.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Reporting or annotating issues can be done on a range rather than a
single line.
Add support for end line and end column.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Kconfig options for RTT control block initialization and linker
section were added in #53569, however the Zephyr west.yml was not
updated to incorporate the Segger repository changes to make use
of the new Kconfig options.
This fixes that.
Signed-off-by: Bryce Wilkins <bryce.wilkins@gmail.com>
Some nodelabels in the display build_all test overlay lacked a "test"
prefix, causing test failures on boards that also define displays with
this nodelabel. Prefix these nodes with "test" to resolve this issue.
Fixes#81610
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
\verbatim is not giving the right output as we need an inline literal.
Switch to \c instead.
Fixes#81595.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
USBD peripheral automatically handles Set Address command which can
lead to state mismatch between USB stack and the host. Keep track of
device address and issue fake Set Address commands on mismatch.
This fixes default vs addressed state mismatch that can occur due to
sufficently high SETUP handling latency. The state mismatch was most
commonly seen as SET CONFIGURATION failure when the enumeration happened
during periods with increased latency.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Set Address behavior is not specified when wValue is greater than 127,
or if wIndex or wLength are non-zero. USB stack did check wValue and
wLength but didn't care about wIndex value. Extend the check so non-zero
wIndex also results in STALL response.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Request and release global power domain only once during setup
of pins. Request and release involves communication over IPC and
it should be avoided if possible. For example if there are 4 pins
(like in UART) where GPD is requested we can limit number of
request/release operations fourfold.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add a common part for AMD board ACP_6_0_ADSP.
Add support for ACP_6_0_ADSP BOARD,
which represents ACP_6_0 soc.
This has a 1 Xtensa HiFi5 core, with 200-800MHz
1.75 MB HP SRAM / 512 KB IRAM/DRAM,
1 x SP (I2S, PCM), 1 x BT (I2S, PCM), 1 x HS(I2S, PCM), DMIC as
audio interfaces.
Signed-off-by: DineshKumar Kalva <DineshKumar.Kalva@amd.com>
Add UART configuration and pin control. Set state to disabled,
as it serves as alternative to default LPUART0 or as second
uart only.
Signed-off-by: Neil Chen <cheng.chen_1@nxp.com>
Add possibility to retrieve VBUS status of the nPM1300 charger through
its sensor APIs. Updated shields/npm1300_ek sample to use the new API.
Signed-off-by: Sergei Ovchinnikov <sergei.ovchinnikov@nordicsemi.no>
Improve type safety and consistency by adjusting variable and
parameter types to avoid signed/unsigned comparisons and implicit casts.
Moreover, explicit casts were applied when converting from
`size_t` to `uint16_t`.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This change marks `w5500_api_funcs`, an instance of
the `ethernet_api`, as `const`.
By using `const`, we ensure immutability, leading to usage of only
`.rodata` and a reduction in the `.data` area.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Changed interrupt priority for GPIO, default 6 is not suitable for
for the ZERO_LATENCY_IRQS function used in this test.
used in this test.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Add CONFIG_GPIO from defconfigs for Infineon boards.
Revert pull/81377, which affect some ble samples which
used GPIO.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
A few bindings in the timer directory (for kernel timing sources) were
being used for counters (which can have alarms set, and have a distinct
API). Move these bindings to the counters directory.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use workflow_call to allow for different type of nodes depending on
event.
On push, we do not need to use zephyr runners, GH runners are enough and
are much faster to deploy and start.
This resolves an issue where push jobs will have to be queued for a
longer time waiting for the prep step, once the prep step is done, we
will have to wait one more time in the queue for requested nodes.
This should speed up execution of push events in CI.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move publishing data to ES to a workflow_run step. This way we can
change the main workflow to use pull_request instead of
pull_request_target.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Platforms that support mmu require memory page access flags to be set in
both tlb and mmu. Add mmu flag update in sys_mm_drv_update_page_flags
function.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
Attempt to invalidate cache for an unmapped address results in cpu
exception for the ptl platform. Perform cache invalidation after
translation activation in tlb. Add address mapping in mmu for platforms
that have it.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
The flags parameter in the sys_mm_drv_map_page function is used, so the
ARG_UNUSED macro invocation is unnecessary. Remove this macro usage to
clean up the code and improvs code readability and maintainability.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
Adds support for using relay buffers and advertising set for the subnet
bridge feature, even if the relay feature is disabled.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
In order to support error and warning message coloring
LOG_BACKEND_SHOW_COLOR must be set. Allow setting it for
customized cases.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The variables 'first' and 'next' in function 'stats_buffer_list_first()'
and 'stats_buffer_list_next()' were potentially used uninitialized.
Depending on the compiler and target architecture, this can lead to
different behavior, including warnings or errors when using strict
warning flags.
By initializing these pointers to 'NULL', we ensure consistent and
expected behavior across all toolchains and configurations.
Signed-off-by: Fabian Kainka <kainka@cognid.de>
DCDC regulator on nRF54L may not always works as intended.
Tune the fix addressing that.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
DCDC regulator on nRF54L may not always works as intended.
Apply a fix addressing that.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
