Rename the CAN data phase API functions to timing_data_* for consistency:
- can_get_timing_min_data() -> can_get_timing_data_min()
- can_get_timing_max_data() -> can_get_timing_data_max()
- .timing_min_data -> timing_data_min
- .timing_max_data -> timing_data_max
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The STM32u% series of processors has a unique set of clock sources for
the FDCAN peripheral. This brings the selection in line with the
existing can_stm32fd clock selection Kconfigs.
This change was tested on a proprietary board using the STM32U5 series
which exposes the CAN pins of the SOC using a transciever on a live CAN
bus as well as on the nucleo_g474re board from ST in loopback mode.
HSE and PLL1Q tests run and all passed.
PLL2P is not currently supported by the clock drivers for STM32U5, and
as such is currently untested. When this support is added, the driver
should be able to use this clock without issue.
When changes from #42097 are merged this fix should be deprecated in
favor of using the methods outlined there.
Signed-off-by: Peter Maxwell Warasila <madmaxwell@soundcomesout.com>
Refactor the Bosch M_CAN shared driver functions to get rid of the
front-end driver wrapper functions.
This requires flipping the relationship between shared config/data
structs and front-end config/data structs. Front-end drivers can now
store a pointer to their custom config/data structs in the .custom
fields of the can_mcan_config and can_mcan_data data structures.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename CONFIG_CAN_STM32_CLOCK_DIVISOR to
CONFIG_CAN_STM32FD_CLOCK_DIVISOR to match driver Kconfig name.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add support for selecting the CAN clock source. Change previously
hardcoded value of PCLK1 to HSE.
Fixes: #44985
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Fix the signature of the CAN bus recovery functions in the Bosch M_CAN
driver frontends.
Fixes: #44345
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit changes the timing_min_data prop_seg
initialization of st,stm32-fdcan drier to zero.
Additionally the nominal sync jump width limits
are also adopted to new values 1 and 128.
This was not tested until recently and therefore
caused the can timing test to fail on stm32g4
after PR #44197 got merged.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Add generic support for can_get_max_filters() to the Bosch M_CAN
base driver and use it in all driver frontends.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Re-running the script that checks for the const qualifier missing on
struct device ISR's parameter.
The script also changes the parameter 'arg' to 'dev' when relevant.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The CAN_BUS_UNKNOWN CAN controller state is only used to indicate that
the current CAN controller state could not be read.
Remove it and change the signature of the can_get_state() API function
to return an integer indicating success or failure.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data and
dev->config instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add optional user data argument to can_set_state_change_callback() to
comply with Zephyr API design guidelines.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename a few CAN API functions for clarity and consistency with other
Zephyr RTOS APIs.
CAN_DEFINE_MSGQ() becomes CAN_MSGQ_DEFINE() to match K_MSGQ_DEFINE().
can_attach_isr() becomes can_add_rx_filter() since a filter callback
function is not an interrupt service routine (although it is called in
isr context). The word "attach" is replaced with "add" since filters are
added, not attached. This matches the terminology used is other Zephyr
APIs better.
can_detach() becomes can_remove_rx_filter() to pair with
can_add_rx_filter().
can_attach_msgq() becomes can_add_rx_filter_msgq() and documentation is
updated to mention its relationship with can_add_rx_filter().
can_register_state_change_isr() becomes can_set_state_change_callback()
since a state change callback function is not an interrupt service
routine (although it is called in isr context). The word "register" is
replaced with "set" since only one state change callback can be in
place.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The PINCTRL_DT_(INST_)DEFINE macros already defined the trailing ;,
making its usage inconsistent with other macros such as
DEVICE_DT_DEFINE.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Catch up on the CAN driver API argument naming changes:
- Unify naming of callback function pointers as "callback".
- Unify naming of user-specified callback function arguments as
"user_data".
- Instances and pointers to struct zcan_frame are named "frame",
not "msg", to avoid confusion with the CAN message queue support.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The maximum number of concurrent filters depends on the hardware and
the driver implementation. This API allows the application to obtain
the maximum number of available filters.
Signed-off-by: Martin Jäger <martin@libre.solar>
Refactors all of the CAN drivers to use a shared driver class
initialization priority configuration, CONFIG_CAN_INIT_PRIORITY, to
allow configuring CAN drivers separately from other devices. This is
similar to other driver classes like I2C and SPI.
The default is set to CONFIG_KERNEL_INIT_PRIORITY_DEVICE to preserve the
existing default initialization priority for most drivers. The exception
is the mcp2515 driver which has a dependency on a SPI driver and must
therefore initialize later than the default device priority.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Since we removed various series headers, move stm32 driver
under main driver/pinmux folder.
Take this change into account into various drivers.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Implementation of the Bosch M_CAN IP driver.
This driver is just the base for a specific SoC implementation.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
