Default the Minimum encryption key size to 16.
Key with reduced size is easier to brut force.
Disable LE legacy pairing by default since it's not secure.
These defaults should suite majority of newly developed applications.
It's better to use sensible more secure defaults,
so applications that really need less secure option consciously change it,
not the other way around.
This may help to prevent downgrade attacks.
Signed-off-by: Sergey Korotkov <sergey.korotkov@nordicsemi.no>
Commit add `modcarrier` shell command for Openthread diagnostic mode.
Command can transmit modulated carrier out of device for test purposes.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
The deprecated CONFIG_NET_SOCKETS_POSIX_NAMES option is removed.
If one wishes to use POSIX API socket calls, then CONFIG_POSIX_API
option needs to be enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Many NXP socs had the following defconfig:
```
config PINCTRL_IMX
default y if HAS_IMX_IOMUXC
depends on PINCTRL
```
However, the PINCTRL_IMX option already has:
```
config PINCTRL_IMX
bool "Pin controller driver for iMX MCUs"
depends on DT_HAS_NXP_IMX_IOMUXC_ENABLED
depends on HAS_MCUX_IOMUXC || HAS_IMX_IOMUXC
default y
help
Enable pin controller driver for NXP iMX series MCUs
```
So the soc level defconfigs are redundant.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Log the create BIG params for debugging purposes.
Also slightly modifies the `qos` struct to use a more
suitable struct to avoid always doing `qos->tx->` and
can now just be `qos->`.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added dppic0 node label, alongside the dppic to maintain backward
compatibility. The use of dppic0 is preferred.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Changed the CMakeLists to enable the nrfx_gppi utilities based solely on
the CONFIG_NRFX_GPPI Kconfig. This unifies the configuration on all nRF
SoC families.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
The resource reservation header is now included according to a Kconfig
value. The Kconfig can be overriden out-of-tree in case a different
header is needed.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Moving the blob client, dfd server and dfu server to their own
elements and increasing the CONFIG_BT_MESH_TX_SEG_MAX to 8 to fit
new composition data into composition data page status message.
Standalone mesh blob client and DFU distributor/update server models
requires one element and those elements only contain the main models
and the models they extend to.
Referring to MshMBT_v1.0 Section 6.1:
The BLOB Transfer Client model defines the messages listed in Table 6.1
, and requires one element: the BLOB Transfer Client Main element. The
BLOB Transfer Client Main element contains the BLOB Transfer Client
main model.
And referring to MshDFU_v1.0 Sections 6.1.1 and 6.2.1:
6.1.1
The Firmware Update Server model adds the state instances listed in
Table 6.1 and Table 6.2 and the messages listed in Table 6.3 to the
model it extends, and requires one element: the Firmware Update Main
element. The Firmware Update Main element contains the Firmware Update
Server main model and all the models that the main model extends.
6.2.1
The Firmware Distribution Server model adds the state instances listed
in Table 6.7 and Table 6.8 and the messages listed in Table 6.9 to the
model it extends, and requires one element: the Firmware Distribution
Main element. The Firmware Distribution Main element contains the
Firmware Distribution Server main model and all the models that the
main model extends.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
Referring to MshDFU_v1.0 Sections 6.1.1, 6.2.1 and 7.1.1 model
descriptions: DFU/DFD server/clients extend BLOB Transfer root models
and DFD server requires Firmware Update Client on the same element. For
this reason we need to make sure that those main models or root models
exist on the same element. And also firmware update client can not be
forced to be in the first element.
For all model extention call return the error code in case of an error.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
update test cases for twister
1. test_errors.py add protection.
2. test_handlers.py change call to status
3. test_testsuite.py change call to status
The log traces for TwisterException objects only.
And the stack trace output follow the same rules for all exceptions,
but StatusAttributeError with its dedicated handlers.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Remove the deprecated can_get_min_bitrate() (replaced by
can_get_bitrate_min()) and can_get_max_bitrate() (replaced by
can_get_bitrate_max()) CAN API functions.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove the deprecated CAN_MAX_STD_ID (replaced by CAN_STD_ID_MASK) and
CAN_MAX_EXT_ID (replaced by CAN_EXT_ID_MASK) macros.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
One of the tests is failing since it was split out in 1a633609a0
triggering an assertion:
ASSERTION FAIL [((((size_t)(16)) << 10) - (((uintptr_t) (&_end)) -
0x20000000)) >= 8192] @
WEST_TOPDIR/zephyr/lib/libc/newlib/libc-hooks.c:139
Fix it by making the min_flash and min_ram parameters up to overall
test level.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The ruff linter and formatter should get a locked version to be installed
for compliance. This prevents new linter issues because of ruff updates
itself.
Ruff version 0.8.0 removed the deprecated UP027 rule so it's removed from
the ignore list.
Update the excludes file to match the actual reported issues.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This definition is deleted in the follwoing commit;
8233b70
as a part of "cleanup", however this definition is
used by smp_log
Signed-off-by: Arif Balik <arifbalik@outlook.com>
Use the "do { } while (0)" construct so the macro behaves like an actual
C statement in all cases. Also evaluate the macro argument only once.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add support for Norik Systems Octopus IO-Board based on
Norik Systems Octopus SoM.
Supported features:
- LTE-M/NB-IoT
- GPS
- LED
- 3-axis accelerometer
- Battery charger
- Solar charger
- SPI NOR flash
- Nano SIM connector
Signed-off-by: Florijan Plohl <florijan.plohl@norik.com>
Add support for Norik Systems Octopus SoM based on nRF9160 SiP.
Supported features:
- LTE-M/NB-IoT
- GPS
- LED
- 3-axis accelerometer
Signed-off-by: Florijan Plohl <florijan.plohl@norik.com>
Add support for setting the sample frequency via `attr_set` and the
output data rate from device tree source.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Add build tests for the IT8801 MFD drivers, including GPIO,
Input and PWM functionalities.
GPIO, Input test: west build -p always -b native_sim
PWM test: west build -p always -b it82xx2_evb
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
IT8801 support GPIO alternate function switching.
Some GPIO pins can be switched as KSO or PWM function.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The IT8801 is an I/O expander that provides GPIO, PWM, Keyboard
functions via the I2C bus.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
For Zephyr Cortex-A Core supports on NXP boards imx8mm, imx8mn, imx8mp,
imx93 and imx95, currently use DDR DRAM memory as Zephyr memory, so
change RAM dts nodes name to be "dram" in order to reduce confusion.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Rename "nxp,kinetis-adc12" compatible to "nxp,adc12" to remove the
device family from its name.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
The initial proposal had the assert included, however this could break
downstream users and it was opted to not add assert in the driver API
calls.
Update the documented example to reflect that.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
