imxrt6xx are dual core devices featuring an ARM Cortex-M33
core and an Cadence Xtensa HIFI4 Audio DSP.
Currently only m33 core is supported. In order to support
the Cadence DSP we need first to do some code-reorganization
for m33.
We start by moving all cm33 related code to its own directory
and introduce the cpuclusters property in soc.yml file.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Add hostname changed printout to event monitor. As the name
says, it is generated when the hostname of the device changes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Starting with b1d24e425c (net: lwm2m:
device object: optionally store error list in settings), it was no
longer possible to build the code with coverage enabled when the
settings subsystem was disabled.
The build would fail with an error like this:
> subsys/net/lib/lwm2m/lwm2m_obj_device.c:262: undefined reference to
> `settings_name_steq'
This fixes#70923.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Add `gdb_q_packet` function to handle proccessing of query packets. Also
add `gdb_qsupported` function to serve as a single place to process and
respond to `qSupported` packets.
Signed-off-by: Robert Zieba <robertzieba@google.com>
Make the current gdb loop enum public under the name `gdb_loop_state`.
This will allow for extending the current stub with further
functionality in the future as new features will require control over
the loop state.
Signed-off-by: Robert Zieba <robertzieba@google.com>
Cf Errata sheet, 2.2.4: With HSE active, switching the system clock source
from any other source to HSI, spuriously deactivates HSE.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
In case of chain loaded application with PLL set as the sysclk source,
directly exit the init function.
This also applies to exit from stop mode and was tested successfully.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Update prj.conf so that
subsys/net/lib/sockets/socketpair.c
is pulled into the build and zsock_socketpair() is
properly defined.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The code was assigning a pointer to a scoped buffer to
an object outside that scope. This would cause the driver
would receive garbage instead of a well-formatted IE and
would likely reject the IE. This in turn caused CSL IE
not being included in enhanced ACKs (verified with
wireshark).
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Generate a sitemap.xml for the documentation.
This aims at helping search engines react faster to the addition/removal
of new pages.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixs USDHC by setting PWR and CD gpio's correctly.
Adds missing button from the GPS module.
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
Check for the existence of
pthread_rwlockattr_getpshared()
and
pthread_rwlockattr_setpshared().
Signed-off-by: Gaetan Perrot <gaetanperrotpro@gmail.com>
According to the `RFC8415` the length of the DUID is at least 1 octet
up to 128 octets. Now a user can choose buffer length without the need
for source code modification.
Signed-off-by: Marcin Gasiorek <marcin.gasiorek@nordicsemi.no>
For BR/EDR L2CAP, if the function bt_l2cap_br_chan_send_cb
instead of bt_l2cap_chan_send is called, the ACL conn and
L2CAP chennel status will not be checked.
Check conn/channel status before sending data in
function bt_l2cap_br_chan_send_cb.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
There are required DTS entries to nable peripherals required
for IPC communication between Radio and APP CPUs.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
There was missing storage partition that is required for setting
subsytem. Add missing entries to board files.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
There are default configs that are provided by default for
e.g. nRF5340dk to enable HCI IPC communication type for
application domain and enable BT controller for radio domain.
These configs were missing for nRF54h20 DK.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This adds a board name that got missed in commit
8dc3f85622 (hwmv2: Introduce Hardware
model version 2 and convert devices)
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Clarify usage of __rom_region_end/size in XIP system.
When PMP is enabled, __rom_region_end should be padded to meet the
requirement of PMP entry, and the actual ROM region usage ends at
.last_section instead of __rom_region_end.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
Updated ROM region padding to utilize LMA instead of location counter,
because the location counter has been assigned to 'RAM_BASE'.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
Explain the different versions of the MB1166 shield and
remove note about that version A09 is not supported
Signed-off-by: Erik Andersson <erian747@gmail.com>
Add support for the A09 version of MB1166 which
have a NT35510 panel controller instead of an
OTM8009a as in prior versions
Fixes#60888
Signed-off-by: Erik Andersson <erian747@gmail.com>
For now DSI settings are hard-coded for the specific
LCD module used on the STM32H747I Discovery board
Signed-off-by: Erik Andersson <erian747@gmail.com>
To support the NT35510 display, some additional
options needs to be configurable in the STM32
DSI peripheral
Signed-off-by: Erik Andersson <erian747@gmail.com>
eth_stats.h is using ethernet api but not including the header,
it must be working by luck in files that include it after
something else that includes ethernet.h, fix by just including it.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
With commit f419ea7990 (runner: linkerserver : remove the probe ID
hardcode), support was added to use serial numbers with the linkserver
--probe argument. However, one invocation of the argument was missed,
and still used the "probe index" syntax. Resolve this issue.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
With CONFIG_NET_POSIX_NAMES being deprecated, convert static
inlines in headers to prototypes, and move implementations
to lib/posix/options/net.c .
Since select and poll should technically also operate on
non-socket file descriptors, these may be relocated in the
future.
Below are some reasons for this change.
1. So posix calls are regular symbols and not directly inlined
as syscalls. This is also the most portable linkage type.
2. Many posix calls are cancellation points and additional
checks are necessary within the implementation.
3. The more we add to an inline call, the less sense it makes
for that call to be inline.
4. When the implementation of a posix function changes, the
interface for it should still remain consistent.
Note: the same principles have been applied in Zephyr's
posix implementation already, e.g. clock_gettime(), so this
is nothing new.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Change the receive workque name to "BT RX WQ" to distinguish it from the
receive thread, and the long workque one to "BT LW WQ" to make the
format consistent with the other Bluetooth threads.
On an nRF52 now "kernel stacks" looks like:
0x200016c8 BT RX (real size 448): unused 280 )
0x20001780 BT RX pri (real size 448): unused 224 )
0x200012c0 BT RX WQ (real size 2240): unused 1360 )
0x20001208 BT TX (real size 768): unused 408 )
0x20001130 BT LW WQ (real size 1344): unused 408 )
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The Low Power Flexcomm driver manages the interrupt handling
and provides an API to register interrupt callbacks.
Register the NXP LPI2C interrupt handler.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
