Add implementation to check auxiliary PDU device address
match by comparing the address in the AUX_ADV_IND PDU with
the addresses in the filter accept list.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the filter check function so that it can be reused
for the Extended Auxiliary PDU filtering.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor move of lll_scan_aux_isr_aux_setup function alongwith
other global functions in the file.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement setting the correct directed advertisers address
type in the Extended Advertising Report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to filter using access list the received
extended auxiliary PDUs. Use resolving list addresses when
resolving list is enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended scanning filter implementation to permit
ADV_EXT_IND PDUs without AdvA so that AUX_ADV_IND PDU can
be received and to filter that PDU based on whether AdvA
is present.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Advertising Report data status to have
"Incomplete, data truncated, no more to come" when data
length is more than "Scan_Max_data".
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Cleanup the scan event LLL done handling for abort on late
schedule, preemption pipeline abort, preemption current
event yield, duration expire, and connection establishment.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use 32-bit value variables when calculating Extended
Advertising and Periodic Advertising radio event time
reservations to consistently use 32-bit variables for
microsecond time units when calculating radio event where
there is possibility to reserve for scheduling of back to
back chained PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to iteratively perform Extended
Advertising enable and disable while Periodic Advertising is
active.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Firmware Update object did not initialise resources PkgName,
PkgVersion and Firmware Update Protocol Support. Initialise
Firmware Update Protocol Support on creation and report CoAP
as default transfer protocol.
Signed-off-by: Marin Jurjević <marin.jurjevic@hotmail.com>
Enabling hci_uart sample requires changing
max BT connections and proper uart overlay. Use
this as sample for ESP32 soc.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add descriptions for each line in application's CMakeLists.txt. Since
this is the first time a new user is exposed to Zephyr applications
CMakeLists.txt, it's a good time to explain why each line exists.
The descriptions must be for both new Zephyr developers with or
without CMake knowledge.
This commit also moves the comment lines from CMakeLists.txt to the
descriptions to make the file simpler.
ref. #39014
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Co-authored-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Modified test to exit early when multithreading is disabled to
fix linking errors.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In order to convert from degrees to radiants the SENSOR_DEG2RAD_DOUBLE
macro must divide the argument by 180 degrees and multiply by PI
radiants, and not the other way around. Please note that same macro
is already defined in the correct way in other sensor drivers as well.
(Fix#39483)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
LwM2M was not covered by networking build all test, leaving an opening
for possible regression in modules that are not enabled by default in
the sample.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`engine_remove_observer_by_path()` was not updated during some recent
LwM2M observer changes, still using the `engine_observer_list` which got
moved into the `lwm2m_context` structure. Update the function to align
with these changes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Convert all in-tree NXP FlexCAN instances from hardcoding the CAN bus
timing in time quanta to specifying a desired sample point of 87.5% as
recommended by CAN in Automation (CiA).
This allows for the CAN driver to calculate the optimal time quanta
based on the CAN clock and the requested CAN bitrate.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Some net_pkt functions in `test_net_pkt_headroom_copy()` did not have
their return values verified, causing coverity complains.
CID: 240661
Fixes#39841
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Check each line whether contains the correct pattern
${location}:${file} before splitting because it
turns out that script passes also compile
definitions added in project CMakeLists.txt such as:
add_compile_definitions(ABCD="XYZ")
which results in the build failure.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Add a Kconfig symbol to enable use of SDMMC hardware flow control.
In specific cases, this feature could help to avoid FIFO ovderrun
and underrun errors.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add get_config function to I2C emulator.
Also update tests using I2C emulator to use i2c_get_config.
Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com>
Add get_config function to NPCX I2C driver. The master mode is hardcoded
and get the speed from a controller.
Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com>
Some applications need to get the current I2C configuration. Add a
proper callback to I2C API under Kconfig option not to change
applications that don't need this feature.
Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com>
`ztls_socket_data_check()` function ignored a fact when
`mbedtls_ssl_read()` indicated that the underlying TCP connection was
closed. Fix this by returning `-ENOTCONN` in such case, allowing
`poll()` to detect such event.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As pylint says "Consider iterating the dictionary directly
instead of calling .keys()" don't use .keys() method.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Previously, if the AD field length was greater than the maximum
fragment size - 2 bytes, an out of bounds access would occur.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/39852
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Add a new toctree with reference material, including:
- API docs (Doxygen)
- Kconfig options
- Devicetree bindings
Note that the toctree is rendered manually due to the limitations Sphinx
has when it comes to including relative URLs. Hardcoding absolute URLs
in toctrees is possible, but that means we'd need to update the toctree
on every release (to point to /version/ URL), and downstream users of
the documentation would have to manually patch the toctree with their
own URL. In order to make local builds work, version prefix is only
added if publish tag is provided.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit is fixing the error on clock control for the AHB3
in the stm32_clock_control_off function.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
