While matching source address for a given Link-Local destination the
functions iterate over interfaces and return a first result with a
valid LL-address. However, they should first try to fetch address of
the default interface as it not always the first one on the list.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Allow Bootstrap server to close the DTLS connection immediately
after receiving Ack to Bootstrap-Finish command.
This is not an error as either parties are allowed to tear down
the connection.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Allow certain RD-client states to timeout.
As stated in LwM2M specification:
The bootstrap procedure failed when the LwM2M Client did not
receive the "Bootstrap-Finish" operation after the
EXCHANGE_LIFETIME time period expired.
The EXCHANGE_LIFETIME parameter is defined in RFC 7252
We must handle the case where Bootstrap server is not sending
information towards us.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add state checks for the get_id and get_base functions, as the
ID and base are not valid when the state of the broadcast
source is BT_BAP_EP_STATE_IDLE.
Since the broadcast_source_get_state uses the slist functions,
the broadcast source object for bt_bap_broadcast_source_get_id
can no longer be `const`.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use the new code-sample directive and roles to document the networking
samples so that they show up as "Related samples" when browsing the
various relevant networking APIs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Use the new code-sample directive and roles to document the video
capture samples so that they show up as "Related samples" when browsing
the API documentation.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Clarified the impact of CONFIG_NET_INTERFACE_NAME Kconfig option
as it can change how SO_BINDTODEVICE BSD socket option behaves.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If asserts are disabled, there is a warning in 'otPlatCryptoInit'
regarding unused variable `err`. This commit fixes that.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
Use the defind value, BT_APPEARANCE_WEARABLE_AUDIO_DEVICE_EARBUD,
instead of the hard coded "magic numbers".
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The sample did not properly include the source
context in the advertising data.
It also set different contexts for PACS and the advertising data
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Synchronizes with the new upstream RX/TX timestamp definition in
OpenThread based on the standard's SFD.
This change is synchronized with the upstream OpenThread implementation
via west.yml.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Fixed broken MCUmgr client unit test.
Added test_ -prefix to tests.
Added testcase.yaml to test trigger test run.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
When publish buffer run out, no thread active process work.
Fix this, by reschedule process work.
Signed-off-by: Weiwei Guo <guoweiwei@syriusrobotics.com>
Current MQTT-SN topic and publish allocators are not thread safe.
Fix this, by using k_mem_slab instead of arrays.
Signed-off-by: Weiwei Guo <guoweiwei@syriusrobotics.com>
GCC format-truncation kicks in on this printk whenever the logging
configuration transforms the LOG_WRN below into a noop, and the snprintk
return argument become unused.
Fix that by switching to strncpy, fixes:
zephyrproject/zephyr/drivers/modem/hl7800.c:1786:74: warning: '%s'
directive output may be truncated writing up to 53 bytes into a region
of size 21 [-Wformat-truncation=]
reproduced with:
west build -p -b mg100 -T samples/net/telnet/sample.net.telnet
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Remove dead and erroneous (DUT is not a dict) if branch. Simply use the
self.options.platform list. Which is filled by either the hardware map
or the '--platform' option.
This change addresses issue #62723 and #62560.
Signed-off-by: Manoel Brunnen <manoel.brunnen@ithinx.io>
Before only with --integration such skips were changed to errors.
This hinders issues when twister is call with --all flag in CI
and new skips on integration platforms are not caught. Then those
skips cause errors in other PRs when --integration was used.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The value of emulation_platforms is a bool corresponding to
--emulation-only CLI option. Therefore, it should be registered
as Filters.CMD_LINE. Without it, twister raises errors when an
integration platform is descoped due to this option.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Mark documents, which are included in other documents as :orphan:
following existing samples in Zephyr tree.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use the defined(__DOXYGEN__) more specifically in the header to better
match i2c.h and make things more explicit. Removes the define being
setup in zephyr.doxyfile.in.
Fixes some of the deprecation notes and what to look for instead. Fixes
some typos.
The async, signal, and rtio APIs for SPI are now shown in the built docs
as would be expected.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The docs should be viewable if doxygen is being run, and that
requires checking for the __DOXYGEN__ define. This should fix
the missing I2C callback, k_poll_signal, and rtio API sections
not being shown in the built documentation.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
This commit:
* adds the `CONFIG_SOC_GECKO_SERIES0` Kconfig option for Gecko Series 0
SoCs
* selects the proper `CONFIG_SOC_GECKO_SERIESx` option where it's currently
missing
Fixes#62806.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Support logging for all POSIX pooled resource types such as
pthread_t, pthread_mutex_t, and pthread_cond_t.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Releasing the lock before notifying condvar led to a race condition
between a thread calling k_condvar_wait to wait for a condition variable
and another thread signalling for this same condition variable. This
resulted in the waiting thread to stay pending and the handle to it
getting removed from the notifyq, meaning it couldn't get woken up
again.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
The signal_poll_event function was previously called without the poll
lock held. This created a race condition between a thread calling k_poll
to wait for an event and another thread signalling for this same event.
This resulted in the waiting thread to stay pending and the handle to it
getting removed from the notifyq, meaning it couldn't get woken up
again.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Removes the pseudo device prerequisite that the LVGL setup routine has been
executed before initialization. The pseudo devices are now registered at
the end of the LVGL setup routine, the driver is not concerned with
configuring the devices anymore. This also removes the need for enforcing
certain priorities within the same init level.
This resolves issue #62753.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
When a packet can't be cloned we crash as we try to initialize the
cursor on a nullptr. We should check if we have a valid pointer,
and if we don't we drop the packet along with a warning.
Signed-off-by: Andreas Ålgård <aal@ixys.no>
In low memory conditions, its possible for socketpair memory allocation
to fail and then the socketpair is freed but after that the remote
semaphore is released causing a crash.
Fix this by freeing the socketpair after releasing the semaphore. Add a
test case to induce low memory conditions (low HEAP and high socketpair
buffer size), with the fix issue is not seen.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The gecko UART driver needs pinctrl support for SOC_GECKO_SERIES1
devices, this has been added to jg and pg 12b series in 40fa96506b but
is missing in others, causing some build failurse.
Add the device nodes for the gg11b and gg12b files since they contain
gecko-uart references and seems to be under the SERIES1 define.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This commit adds Kconfig variables to configure ADLTC2990. This commit adds
basic driver code for analog devices ltc2990 sensor.
Signed-off-by: Jilay Pandya <jilay.pandya@zeiss.com>
