out_dev(), etc., as a name is a holdover from before commit 73ac1466fb
("scripts: edtlib: Call nodes "nodes" instead of "devices""). It's
confusing for the same reasons as mentioned in that commit.
Renamings:
- dev_ident() -> node_ident()
- out_dev() -> out_node()
- out_dev_s() -> out_node_s()
- dev_aliases() -> node_aliases()
- dev_path_aliases() -> node_path_aliases()
- dev_instance_aliases() -> node_instance_aliases()
Also clean up comments to talk about nodes instead of devices where it
makes sense.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
RTT_CONSOLE depends on CONSOLE, but SEGGER_SYSTEMVIEW and
SHELL_BACKEND_RTT select RTT_CONSOLE without also selecting CONSOLE.
This leads to a build failure in drivers/console/rtt_console.c (compiled
if RTT_CONSOLE is enabled) unless CONSOLE is enabled some other way.
Symbols like CONFIG_RTT_RETRY_DELAY_MS won't be defined, because they
depend on CONSOLE.
Came up in https://github.com/zephyrproject-rtos/zephyr/pull/21860. This
fix was verified there.
(Would be nice to get rid of some 'select's in the console subsystem at
some point. This is a quick fix.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Encoding of values with use of base64 has been marked as deprecated and
will be removed in future releases.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This guarantees muscle memory will work over multiple runs when the
same boards are connected. (The "nrfjprog --help" output for --ids
does not guarantee an order.)
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Right now, the nrfjprog runner will prompt the user for which board to
use if there are multiple possibilities and the --snr command line was
not given to specify one ahead of time.
Tweak this so it only happens if standard input is connected to a
terminal. This should avoid stalling the process on board farms when
this runner is used in automation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The create() classmethod should not be doing any I/O -- its only job
is to create the ZephyrBinaryRunner instance. It's currently trying to
figure out what the serial number of the board is, though. Let's defer
that work to do_run(), so it gets handled by run_common's exception
handler.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Catch RuntimeError when calling runner.run() and print a message
instead of dumping stack unless in verbose mode.
This improves the command line interface when runners raise exceptions.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Following update of STM32Cube packages for series F0/L0/F3,
a new file ll_usb.h is now available for these series.
As a consequence, specific hanlding is no more requested for this
series is stm32 usb_device driver.
Fixes#21962
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is enabled through being selected by IEEE802154_CC1200 and
IEEE802154_RF2XX.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Flashing board nucleo_f207zg requires additional instructions
to be provided to openocd in order to enable flashing without holding
the reset button.
Update nucleo_f207zg openocd config to provide requested instructions.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
SHT3XD_TRIGGER is already being selected by
SHT3XD_TRIGGER_GLOBAL_THREAD, which is enabled in the same configuration
file.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
'build_only' directive may not be justified here and
prevent to see issue when running the test.
Similarly to non tickless version exclude qemu_x86_coverage
and qemu_cortex_m0 platforms.
It was actually tested failed on qemu_cortex_m0, no error
reported on qemu_x86_coverage, but removed to be safe on that side
as well.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
We need to include soc.h in nrf5340_cpunet_reset.c, to include
the nRF5340 device headers. Fixes a compilation error when we
build with CONFIG_ARM_MPU=n.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Invalid channel should be filtered in intmux isr, please refer to
page 1243~1244 of chapter 36 INTMUX of RV32M1 RM.
Note: Unlike the NVIC, the INTMUX does not latch pending source
interrupts. This means that the INTMUX output channel ISRs must
check for and handle a 0 value of the CHn_VEC register to account
for spurious interrupts.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Bluetooth sample with controller crypto, requires sys_rand32_get that
used to be linked with Tinycrypt. The selection, within Kconfig of
Tinycrypt, that has been enabling compilation of the symbol has
been removed and thus preventing controller crypto to link.
This commit moves the selection to BT_CTLR_CRYPTO.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allow models to skip a periodic publish interval by returning an error
from the publish update callback.
Previously, an error return from publish update would cancel periodic
publishing. This can't be recovered from, and as such, no valid model
implementation could return an error from this callback, and there was
no way to skip a periodic publish.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Nrfx_uarte uses a hardware timer/counter to count received bytes.
Keeping this timer enabled increases power consumption for some SoCs.
This change disables the timer when an inactive power state is set.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
The `zephyr_get_xxx` API for option fetching
enables prefix stripping. For some reason
the main API docs named it 'SKIP_PREFIX' instead.
Signed-off-by: Timor Gruber <timor.gruber@gmail.com>
Under race conditions it is possible that there is no call
to k_sem_give to the waiting k_sem_take in the ull_disable
function.
ull_disable function checks for reference count before
using a mayfly to schedule lll_disable, which in turn
would close requested currently active role event leading
to done event being propogated to ULL. Done event would
then call the set disabled_cb callback when the reference
count is zero, giving the semaphore to the waiting
k_sem_give in the ull_disable.
Under race conditions if the reference count reached zero
after the reference count check and before the disabled_cb
was assigned in the ull_disable function, then there are
chances that a k_sem_give is not called while ull_disable
proceeds to waiting using k_sem_take.
Fixes#21586.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add reference to wpanusb and wpan_serial examples. This links user with
some IEEE 802.15.4 applications.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Define CONFIG_NET_CONFIG_IEEE802154_DEV_NAME value necessary to enable
atsamr21_xpro board on wpanusb sample.
The documentation was updated referencing the atsamr21_xpro board.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Guard calls to bt_conn functions in bt_le_adv_start_internal with
IS_ENABLED(CONFIG_BT_PERIPHERAL) to avoid undefined symbols in builds
that do not support that role.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Interrupts should not be locked when servicing a system call,
and the kernel should not think we are in an interrupt handler
either.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is (always) selected, in
soc/arm/ti_simplelink/cc32xx/Kconfig.soc.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Refactors the mcux wdog driver to use generated device tree macros
directly. Removes now unused dts fixup macros from kinetis socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux rtc driver to use generated device tree macros
directly. Removes now unused dts fixup macros from kinetis socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux dspi driver to use generated device tree macros
directly. Removes now unused dts fixup macros from kinetis socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux lpsci driver to use generated device tree macros
directly. Removes now unused dts fixup macros from i.mx rt and kinetis
socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux uart driver to use generated device tree macros
directly. Removes now unused dts fixup macros from kinetis socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux lpi2c driver to use generated device tree macros
directly. Removes now unused dts fixup macros from kinetis socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is selected by the SOC_SERIES_CC13X2_CC26X2,
SOC_SERIES_CC2650, SOC_SERIES_CC32XX, and SOC_SERIES_MSP432P4XX symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is selected by the SOC_SERIES_EFM32HG,
SOC_SERIES_EFM32PG12B, SOC_SERIES_EFM32WG, SOC_SERIES_EFR32FG1P, and
SOC_SERIES_EFR32MG12P symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
I ran into a build failure trying to use Zephyr's MCUmgr. It was a
missing symbol at link time, and since I am using C++, I looked to see
if it was a name mangling issue. The mcuboot.h header file was missing
`extern "C"` guards, which was the root cause of the issue.
This commit adds C++ support to mcuboot.h by adding in `extern "C"`
guards. I validated this change by building and running my DFU
application with MCUmgr successfully.
Signed-off-by: Brooks Prumo <brooks@prumo.org>
We have some races causing random failures with this platform, set cpu
number to one while we investigate and fix the issue.
Related to #21317
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is selected by SOC_SERIES_PSOC62, in
soc/arm/cypress/psoc6/Kconfig.series.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The counter_basic_api test was broken for i.mx rt boards when we
refactored the mcux gpt driver to use generated device tree macros in
commit b8ad9969ef.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
