This changes the minimal logging Kconfig to select printk rather
than imply it, this is because if someone turns printk off,
minimal footprint logging does not work, therefore it needs to be
a requirement.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Rather than exposing shell commands that take an opcode and
an optional parameter, the shell commands are now explicit
so that it is easier for a person to use the shell.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Generates XML file containing VIF policies by reading the device tree
using EDT.pickle generated during build
This script writes a subset of general and sink-pdo VIF policies in
output file
This script gets invoked during build if enabled through kconfig
The generated XML containing USB-C VIF policies could be used by
USB PD/Type-C analysers/testers to understand USB-C properties and
perform tests accordingly
Signed-off-by: Madhurima Paruchuri <mparuchuri@google.com>
Add experimental CDC ACM implementation for new USB device stack.
It currently implements only UART IRQ API support and is WIP.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The device supprt brings support for multiple stack instances,
multiple configuration, asynchronous transfer model, ability to
change most of the properties of a device at runtime and
the composition of configuration and classes at runtime.
The stack requires new UDC driver API and is not compatible
with old driver API (usb_dc_). The classes (functions) of old
(current) USB device stack cannot be used with new ones and must
be ported.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The `audio connect` shell command did not really do
anything anymore, and has thus been removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some of the unicast audio shell commands were guarded by
CONFIG_BT_AUDIO_UNICAST_CLIENT and only usable by the client.
This moves some of the commands to a CONFIG_BT_AUDIO_UNICAST
guard instead, so that they are usable for builds with just
the server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This fixes VCP Volume Renderer linker error that was seen if built
with VOCS and/or AICS support disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This seems to have caused build failures in spite
of CI passing in PR 52653.
This reverts commit 0a02a4a2af.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Introduce the Kconfig symbol `NET_PKT_BUF_USER_DATA_SIZE`. It is used to
set the user data size in the buffers used in the rx and tx network buffer
pools.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
This Kconfig setting was deprecated since
commit 8e99db5801 ("Kconfig: net: deprecate `NET_BUF_USER_DATA_LEN`")
and zephyr release 3.0.0.
This commit removes this deprecated and unused setting.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
An LE controller shall no longer support HCI_Read_Local_Supported_Codecs
[v1] according to BT Core 5.3.
Command bit and support code removed.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Adding a bit-mask to the 'extra' data structure allowing passing info
re. active CIS's to the ull_conn_iso_done handling. Per CIS storing
an expiration time counter, monitoring in done handling. Adding
establishment timeout monitor in CIS Create procedure, completing
and ntf'ing accordingly.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
If a CIS is in teardown state, the data in structure should not be
trusted, so skip passing data to ISOAL
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Instead of storing the calculated reload value (in conn intervals) in
the conn object, now store the timeout value, and perform calculation
when used. This allows using the timeout value across all CIS's without
having to re-calc and store on change of TO
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
This allows putting the UART backend on a serial device that has to be
quiet unless logging is explicitly enabled at runtime.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Added a new Kconfig option for the Bluetooth Host to allow
unauthenticated pairing attempts made by the peer where an
unauthenticated bond already exists on other local identity.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Update the Bluetooth specific Kconfig legacy log template to use the new
log inheriting template.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add a new Kconfig template that allow log modules to inherit their log
level from their parent module.
For example, the logs used in the Bluetooth audio like
`BT_AUDIO_STREAM_LOG_LEVEL` can inherit their level from
`BT_AUDIO_LOG_LEVEL`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Missing decode of conn_event_count on CIS_IND
Peripheral Suggest update to conn_event_count in case of a delayed
CIS_IND, allowing CIS peripheral more time to setup
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The Bluetooth spec states that a K-frame exceeding the device's MPS
should trigger a disconnection of the channel.
Fixes two PTS tests that verify this behavior:
L2CAP/LE/CFC/BV-27-C
L2CAP/ECFC/BV-34-C
The current behavior is a silent truncation, which is not very nice for
the user, even if the spec would allow it.
Fixes#52228 and #51174.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add mayfly locking around the access to the local pending procedure list
as it is accessed by both thread and mayfly.
Fixes#45427
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
When generating notification for Sleep clock accuracy, check for
success on rx_node allocation was left out. This is added.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
When MCC disconnected, it would memset the entire instance.
This causes issues, because the subscription parameters
would also be memset, causing the `notify` callback to
be set to NULL. If this was done as part of a disconnect,
the GATT layer would attempt to call the notify callback
as part of cleaning up the ACL, but if the callback was
set to NULL (from the memset) this caused a fatal error.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If LOG_PRINTK is used then the buffer size needs to be larger to
account for the additional header/footer output from the shell.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This change will enable the logging system to handle printk() calls by
default if printk support is enabled, which improves output resiliency
when logging, mcumgr and printk calls are used. Will disable keep
LOG_PRINTK disabled for tests which are not using the new API as
moving to LOG_PRINTK causes test data to be output to a different UART
in the old test system.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
When reporting a receive state to the upper layers, the broadcast
assistant should report NULL if there is not a receive state
active. The "activeness" of a receive state is determined by
the length of the characteristic - If it is 0 then there
is no receive state active.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some missing features for getting coverage data for unit tests:
- Setting the unit_testing board to have coverage support and native
application.
- Fixing the CONFIG_COVERAGE check
Signed-off-by: Yuval Peress <peress@google.com>
Remove the struct bt_vcp pointer from the volume
renderer API, as there is only ever a single
Volume Renderer instance on a device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Split the `bt_vcp_cb` struct into separate structure for
the volume controller and the volume renderer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The VCP server, known as the volume renderer, has a
more explicity bt_vcp_vol_rend API naming scheme now.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the bt_vcp_vocs API as it did the same as the
bt_vocs API, and did not really any functionality.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The AICS functionality can be exercised using the
bt_aics API instead. These functions did very little
besides cluttering up the bt_vcp API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Renames almost all occurences of VCS to VCP, as we want to
use the profile as the namespace for volume control.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename vcs.h to vcp.h to better detail what the
file contains, as it is more than just VCS. This also
renames the Kconfig file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The LoRaWAN subsystem uses the system work queue internally and needs
more than the default stack size of 1024 bytes. This is considered
in the sample application, but may be forgotten by out of tree users.
Enforcing it via Kconfig prevents users from accidentally getting
hard-to-debug stack overflows.
Signed-off-by: Martin Jäger <martin@libre.solar>
