This makes it possible to pass different byte arrays to gatt write
making it usable to test attributes that take more than a single byte.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This prevents any work to be submitted until the stack is initialized
thus avoiding pointless hash generation, etc, while initializing the
system.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds support for enabling/disabling PA sync receive,
which allows applications to control when to receive data
while a sync is established.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If an ACL connection is disconnected while there is an ISO connection
associated with it the ACL connection will not be cleanup properly as
the code attempt to cleanup the ISO connection and breaks without
proceeding to cleanup the ACL as well.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The callbacks has been moved from being local to each
bt_le_per_adv_sync object, to being global. The
removal of the pointer in bt_le_per_adv_sync was
missing from that update.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix shell build errors when building with combined host and controller
but the selected controller is not the in-tree zephyr controller, i.e
CONFIG_BT_CTLR=y, CONFIG_BT_LL_SW_SPLIT=n and cmd_scanx and others
are not defined.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a k_usleep() in test_timer_duration_period test to align ticks
before starting the timer. This fixes some rare off-by-1 failures.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In old version nSIM, when cpu is sleeping, no response to
inter-processor interrupt although it's pending and interrupts
are enabled(SNPS JIRA issue P10019563-41294). Now this has
been fixed in nSIM version (2020.09), so we can safely remove it.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Currently, there is a case for net_config_init function that for
timeout==0 and when iface is already up, the ip setup is not proceed
and the error message "Timeout while waiting network..." is logged.
This commit fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Add support for interrupt driven MSI-X PVM feature for Viper.
Function mask bit update is tracked with snoop interrupt
and vector mask bit update is tracked with pcie pmon lite
address range access detection interrupt.
Both the interrupts are required to enable this feature.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
MSI-X PVM feature requires snoop interrupt for tracking configuration
space register (msix_cap) update and PCIe PMON lite interrupt for
tracking MSI-X table update. Add both the interrupts for Viper M7 DT.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
drivers: pcie_ep: iproc: move msi/msix functions to a separate
file. This increases readability and modularity.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
File names such as pcie_ep_bcm_iproc.c / pcie_ep_bcm_iproc_regs.h
seem unnecessarily long, same with CONFIG symbols' names.
Let's shorten them by replacing 'bcm_iproc' with simply 'iproc'.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Adds the socket option TLS_ALPN_LIST for SOL_TLS sockets
Passes the configured alpn list to the mbedtls config
on mbedtls init
Signed-off-by: Emil Hammarstrom <emil.hammarstrom@assaabloy.com>
In fixing up the altera vendor prefix, we forgot to rename the binding
files to match the compatible.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we are sending data directly, we already have TCP lock so
there is no need to do any locking. But when data is re-sent,
the work queue handler is doing the sending so we need to lock
the TCP connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When receiving data that needs to be passed the data to application,
queue it for short time so that we do not have TCP connection lock
held. This way if the application wants to send data, there is no
possibility that the connection lock would prevent sending data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Release the context lock before passing data to the application
socket as that might cause deadlock if the application is run
before the RX thread and it starts to send data and if the RX
thread is never able to run (because of priorities etc).
Fixes#29347
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Listen func goes through a chain of calls to call winc1500_accept.
This is done to install the accept callback and should not block.
This fixes#28953 where winc1500 driver blocks on listen.
Signed-off-by: Nicolai Glud <nicolai.glud@prevas.dk>
The synchronous arch hook wasn't being invoked when
k_mem_domain_init() was called with a partition list.
This could result with regions not being programmed in
the page tables as expected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The current policy of always excluding stacks that aren't
owned by the current thread only works well on MPU systems,
where it is very fast to have a reserved MPU region corresponding
to the stack buffer of the current thread.
This unfortunately is not efficient on MMU-based systems, it
would require either a different set of page tables per thread
or an expensive page table update on context switch.
This PR relaxes the documented policy to leave it up to the
implementation whether threads that all belong to the same
memory domain can see each other's stacks.
There's lots of precedent for this, for example on Linux threads
in the same process can all access each other's stacks.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There are a few cases in which "altera" was used instead of "altr" as
the vendor prefix. Update DTS and bindings in those cases to use "altr"
Fixes#29373
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Extend the test_single_read test case to catch RX_RDY events that are
not expected to appear.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
There is no need to involve a work queue to control timeouts in
the uart_nrfx_uart driver. Kernel timers are sufficient for those
tasks, and the uart_nrfx_uarte driver may serve as a proof of this.
Replace then those uses of work queue with timers, for consistency
and simplicity, also to avoid potential issues with cancellation of
the delayed work queue items.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The SPI NOR device on this board supports fastread, 2READ, DREAD,
4READ, and QREAD for read opcodes, but only PP and QPP for write
opcodes. Provide a clue to people trying to use 2READ with 2PP: it
won't work.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Rather than doing a doc build on every PR, limit it to PRs that either
touch a file in doc/, *.rst and what's listed as DOXY_SOURCES in
doc/CMakeLists.txt.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When waiting for data from CP, the data timeout check must happen before
no-data check. If not, a partial packet may endlessly hold PD in
"wait-for-data" state, while the PD keeps reporting status as online
till another packet is received.
Fix this my moving no-data check below the timeout check.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Split CP and PD samples into dedicated directories as the difference
between the two are expected to grow with time. Also, do some
refactoring.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
All OSDP packets must start with a mark byte (0xFF) followed by a Start
of Message byte (0x53). Skip all bytes received until such a sequence is
seen to to avoid waking up the refresh thread needlessly.
Also, refactor osdp_uart_isr() to reduce number of local variables.
Fixes: #28168 Coverity-ID: 214218
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Minimize number of exported methods by unifying all osdp_cp_send_cmd_*()
as osdp_cp_send_command().
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Exported header oftenly used when creating a logging
backend that inpects the log 'stream'.
Enables use in external Zephyr modules implementing the
logging backend interface.
Signed-off-by: Emil Hammarstrom <emil.hammarstrom@assaabloy.com>
These defines are leftover of old platform settings implementation
and are not used any more.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
