Use of '__DEPRECATED_MACRO' was not compatible with the way macro
is used later in this driver.
Remove it and keep the warning as vector for deprecation information.
Additionally, replace DT_NODE_HAS_PROP with DT_INST_PROP as
using the former is not recommended with boolean properties.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add support for i.MX8MP target.
This has a 1 Xtensa HiFi4 core, with 64 KB TCM,
256KB OCRAM, 8MB SDRAM and 1 SAI as audio interface.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Add dtsi file for i.MX8MP board.
This has one HiFi4 core, from Cadence, lx6 compatible
and 2 System RAM.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Fixes the code-block example for K_EVENT_DEFINE() documentation
to show that it only takes one argument instead of three.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
The test identifier of mutex error case in testcase.yaml is
exactly the same as mutex api's test identifier.
So I fix this.
Signed-off-by: Lixin Guo <lixinx.guo@intel.com>
In some drivers, noncache memory need to be used for dma coherent
memroy, so add nocache memory segment mapping and support for ARM64
platforms.
The following variables definition example shows they will use nocache
memory allocation:
int var1 __nocache;
int var2 __attribute__((__section__(".nocache")));
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Refactors all of the ADC drivers to use a shared driver class
initialization priority configuration, CONFIG_ADC_INIT_PRIORITY, to
allow configuring ADC drivers separately from other devices. This is
similar to other driver classes like I2C and SPI.
The default is set to CONFIG_KERNEL_INIT_PRIORITY_DEVICE to preserve the
existing default initialization priority for most drivers. The
exceptions are lmp90xxx, mcp320x, and mcux_adc16 drivers which have
dependencies on GPIO, SPI, and/or DMA drivers and must therefore
initialize later than the default device priority.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
The current modem sockets poll implementation has 2 limitations
as of today:
- not following posix spec wrt timeout of -1 (should be forever,
but as today it's was returning immediately)
- not able to poll from multiple threads on different sockets
on the same modem.
This pull request should implement these limitations.
Signed-off-by: Wouter Cappelle <wouter.cappelle@crodeon.com>
Add a DTS description of timer5 to: STM32G474, STM32G484, STM32G473,
STM32G483, and STM32G471
Add a DTS description of timer5 to: STM32G474, STM32G484, STM32G473,
STM32G483, STM32G491, and STM32G4A1
Signed-off-by: Pete Dietl <petedietl@gmail.com>
BUILD_ASSERT macro was disabled for MWDT toolchain from the
moment of adding MWDT support to Zephyr. Built-in _Static_assert
is now working fine for the most of the cases with MWDT toolchain
so we can use it in BUILD_ASSERT.
The only exception is _ARCH_MEM_PARTITION_ALIGN_CHECK macro
as it often used with variable addresses as parameters
which need to be checked at compile time. We disable
_ARCH_MEM_PARTITION_ALIGN_CHECK for MWDT toolchain so we can use
BUILD_ASSERT in other places.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Capture some general rules for writing bindings that we've been
enforcing in review but could use better documentation for.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
DT_INST_NODE_HAS_PROP() returns true always since the boolean
tag is valid. Use DT_INST_PROP_OR() to get the real value.
Fixes: baecd7e55a drivers: uart_ns16550: Remove CMake-based templating
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Fix the limits for the timing parameter calculations.
The lower limit for the phase_seg2 value is wrongly specified as 1 to 7,
but 1U is substracted before writing it to the CTRL1:PSEG2 register
field. This results in register field values between 0 and 6, but 0 is
an invalid value for the PSEG2 register field.
The upper limits for several of the timing parameters are wrong as well,
but this does not result in invalid register field values being
calculated. It can, however, result in not being able to meet CAN timing
requirements.
The confusion in specifying the limits likely stems from the timing
calculations and timing limits using the "physical" values, whereas the
registers fields all use the "physical" value minus 1. When the
datasheet says "The valid programmable values are 1-7", the
corresponding limits should be set to 2 to 8 to take the "minus 1" into
account.
Fixes: #39541
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Fixes#39538
RTT_UNLOCK() uses a variable defined in RTT_LOCK() making mandatory
to use both function in the same block
Signed-off-by: Guillaume Lager <g.lager@innoseis.com>
Refactors all of the clock control drivers to use a shared driver class
initialization priority configuration,
CONFIG_CLOCK_CONTROL_INIT_PRIORITY, to allow configuring clock control
drivers separately from other devices. This is similar to other driver
classes like I2C and SPI.
Most drivers previously used CONFIG_KERNEL_INIT_PRIORITY_OBJECTS or
CONFIG_KERNEL_INIT_PRIORITY_DEVICE, therefore the default for this new
option is the lower of the two, which means earlier initialization.
The even lower defaults for STM32 and Arm Beetle are preserved by
SoC-family level overrides.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
This enables accessing the hyperflash through the flash api.
Added a feature to memc_mcux_flexspi that waits for flexspi bus to be
quiet.
Signed-off-by: Nicolai Glud <nicolai.glud@prevas.dk>
Drop the 2.2.0 version entry so that its link is removed from the docs
drop-down list.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add 2.7.0 to the version list so that a link to it is created on the
documentation drop-down list.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Always add the boards/<arch>/<board>/support directory to the OpenOCD
runner search path if the directory exists.
This simplifies using custom --config <partial-board.cfg> runner
arguments without having to use the full path to the cfg file.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
There is no power channel within the name array that
is used by e.g INA23X so let's add it to have support
in sensor shell commands.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Use the shared CONFIG_SERIAL_INIT_PRIORITY for driver initialization
priority.
Override the default value for the NEORV32 SoC to ensure the serial
driver is initialized after the syscon driver by default.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
After the __printf_like validation was added to the shell_fprintf
functions we got warnings while building the
'samples/subsys/shell/shell_module' due to incorrect specifiers
while printing size_t variables. Fix that.
Fixes: #39386
Fixes: fe2075d140 "shell: Add __printf_like to shell_fprintf"
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Commits affecting Zephyr that are included with the new revision:
12b496e Add IMG_MGMT_FRUGAL_LIST configuration option;
18c628d cborattr: fixes missing error handling;
2e385b6 zephyr: Fix usage of zephyr_img_mgmt_flash_area_id.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
When creating a socket, be sure to check the address
family and set the correct address family option in
the AT command.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Use a new branch of Mbed TLS 3.0 based on the upstream history rather
than our local version with a different directory layout.
Signed-off-by: David Brown <david.brown@linaro.org>
Use the Mbed TLS module, expecting the upstream directory layout rather
than the nested directory we've been using before.
Signed-off-by: David Brown <david.brown@linaro.org>
Currently, west spdx --init uses os.mknod to create an empty file
to enable the Cmake file-based API system. As reported in #39311,
Python on Windows does not implement os.mknod.
This commit switches to using open()/close() instead of os.mknod()
to address this issue.
Signed-off-by: Steve Winslow <steve@swinslow.net>
For looking at statistics over time, it is helpful to be able to
quickly query the number of unique maintainers, collaborators,
areas, and the number of orphaned areas (without a maintainer).
This change adds the `count` subcommand to
`scripts/get_maintainer.py`.
```
% python3 ./scripts/get_maintainer.py count -h
usage: get_maintainer.py count [-h] [-a] [-c] [-n] [-o]
optional arguments:
-h, --help show this help message and exit
-a, --count-areas Count the number of areas
-c, --count-collaborators
Count the number of unique collaborators
-n, --count-maintainers
Count the number of unique maintainers
-o, --count-orphaned Count the number of orphaned areas
% python3 ./scripts/get_maintainer.py count
areas: 113
maintainers: 49
collaborators: 81
orphaned: 21
% python3 ./scripts/get_maintainer.py count -o
orphaned: 21
```
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Warning IS_ENABLED_CONFIG allows checkpatch.pl to generate a warning
when IS_ENABLED macro is used with an argument which is not a CONFIG_
symbol.
This is abusive as the macro definition implicitly mentions it could
be used with other symbols ("It is often used with a @p CONFIG_FOO").
In Zephyr, IS_ENABLED macro is also used with for instance DT macros,
which generates github CI failures, which then require waiver from
maintainers.
Make things more simple by just removing this warning.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This allows for better control over IUT behaviour by Upper Tester.
PTS and TS require inconsistent behaviour in terms of how IUT should
return credits. Some tests require return on explicit UT request and
some require that IUT returns credits autonomously.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Better group code specific for e.g. ISO broadcaster and
ISO sync receiver.
No code has been changed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Splitt he ISO broadcast config into broadcaster and
sync receiver. This will allow a device that only
wants to one of the roles to have a much more optimized
configuration.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
OpenThread has lately got an option to provide a custom
crypto backend that replaces the default, based on mbedTLS
API. Implement a backend based on ARM PSA crypto API that
is better suited for applications willing to take advantage
of the ARM trust zone technology.
Add Kconfig option: OPENTHREAD_CRYPTO_PSA_ENABLE which
enables that backend.
Also, another Kconfig option:
OPENTHREAD_PLATFORM_KEY_REFERENCES_ENABLE, implied by the
former, which enables usage of key references instead of
literal keys in OpenThread. It will eventually allow
OpenThread applications to keep sensitive data such as
encryption keys in the secure storage, accessible from the
secure world only.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
