shell: modules: promote edac mem shell subcommand to root shell command

Promote the "edac mem" shell subcommand to a generic "devmem" root shell
command. This command is useful for poking around registers and memory
outside of the EDAC drivers.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit is contained in:
Henrik Brix Andersen 2021-07-01 14:35:56 +02:00 committed by Anas Nashif
commit fe2075d140
4 changed files with 118 additions and 97 deletions

View file

@ -457,107 +457,10 @@ SHELL_STATIC_SUBCMD_SET_CREATE(sub_info_cmds,
SHELL_SUBCMD_SET_END /* Array terminated */
);
/* Memory operation commands */
static int memory_read(const struct shell *sh, mem_addr_t addr, uint8_t width)
{
uint64_t value;
int err = 0;
switch (width) {
case 8:
value = sys_read8(addr);
break;
case 16:
value = sys_read16(addr);
break;
case 32:
value = sys_read32(addr);
break;
default:
shell_fprintf(sh, SHELL_NORMAL, "Incorrect data width\n");
err = -EINVAL;
break;
}
if (err == 0) {
shell_fprintf(sh, SHELL_NORMAL, "Read value 0x%lx\n", value);
}
return err;
}
static int memory_write(const struct shell *sh, mem_addr_t addr,
uint8_t width, uint64_t value)
{
int err = 0;
switch (width) {
case 8:
sys_write8(value, addr);
break;
case 16:
sys_write16(value, addr);
break;
case 32:
sys_write32(value, addr);
break;
default:
shell_fprintf(sh, SHELL_NORMAL, "Incorrect data width\n");
err = -EINVAL;
break;
}
return err;
}
/* The syntax of the command is similar to busybox's devmem */
static int cmd_mem(const struct shell *shell, size_t argc, char **argv)
{
uint64_t value = 0;
mem_addr_t phys_addr, addr;
uint8_t width;
if (argc < 2 || argc > 4) {
return -EINVAL;
}
phys_addr = strtol(argv[1], NULL, 16);
device_map((mm_reg_t *)&addr, phys_addr, 0x100, K_MEM_CACHE_NONE);
shell_fprintf(shell, SHELL_NORMAL, "Mapped 0x%lx to 0x%lx\n",
phys_addr, addr);
if (argc < 3) {
width = 32;
} else {
width = strtol(argv[2], NULL, 10);
}
shell_fprintf(shell, SHELL_NORMAL, "Using data width %d\n", width);
if (argc <= 3) {
return memory_read(shell, addr, width);
}
/* If there are more then 3 arguments, that means we are going to write
* this value at the address provided
*/
value = strtol(argv[3], NULL, 16);
shell_fprintf(shell, SHELL_NORMAL, "Writing value 0x%lx\n", value);
return memory_write(shell, addr, width, value);
}
SHELL_STATIC_SUBCMD_SET_CREATE(sub_edac_cmds,
SHELL_CMD(info, &sub_info_cmds,
"Show EDAC information\n"
"edac info <subcommands>", cmd_edac_info),
SHELL_CMD(mem, NULL,
"Read / Write physical memory\n"
"edac mem address [width [value]]", cmd_mem),
#if defined(CONFIG_EDAC_ERROR_INJECT)
/* This does not work with SHELL_COND_CMD */
SHELL_CMD(inject, &sub_inject_cmds,

View file

@ -12,3 +12,7 @@ zephyr_sources_ifdef(
CONFIG_DATE_SHELL
date_service.c
)
zephyr_sources_ifdef(
CONFIG_DEVMEM_SHELL
devmem_service.c
)

View file

@ -38,3 +38,9 @@ config DATE_SHELL
default y if !SHELL_MINIMAL
help
This shell provides access to date and time based on Unix time.
config DEVMEM_SHELL
bool "Enable devmem shell"
default y if !SHELL_MINIMAL
help
This shell command provides read/write access to physical memory.

View file

@ -0,0 +1,108 @@
/*
* Copyright (c) 2020 Intel Corporation
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <device.h>
#include <shell/shell.h>
#include <stdlib.h>
static int memory_read(const struct shell *sh, mem_addr_t addr, uint8_t width)
{
uint64_t value;
int err = 0;
switch (width) {
case 8:
value = sys_read8(addr);
break;
case 16:
value = sys_read16(addr);
break;
case 32:
value = sys_read32(addr);
break;
default:
shell_fprintf(sh, SHELL_NORMAL, "Incorrect data width\n");
err = -EINVAL;
break;
}
if (err == 0) {
shell_fprintf(sh, SHELL_NORMAL, "Read value 0x%lx\n", value);
}
return err;
}
static int memory_write(const struct shell *sh, mem_addr_t addr,
uint8_t width, uint64_t value)
{
int err = 0;
switch (width) {
case 8:
sys_write8(value, addr);
break;
case 16:
sys_write16(value, addr);
break;
case 32:
sys_write32(value, addr);
break;
default:
shell_fprintf(sh, SHELL_NORMAL, "Incorrect data width\n");
err = -EINVAL;
break;
}
return err;
}
/* The syntax of the command is similar to busybox's devmem */
static int cmd_devmem(const struct shell *sh, size_t argc, char **argv)
{
mem_addr_t phys_addr, addr;
uint32_t value = 0;
uint8_t width;
if (argc < 2 || argc > 4) {
return -EINVAL;
}
phys_addr = strtol(argv[1], NULL, 16);
#if defined(CONFIG_MMU) || defined(CONFIG_PCIE)
device_map((mm_reg_t *)&addr, phys_addr, 0x100, K_MEM_CACHE_NONE);
shell_print(sh, "Mapped 0x%lx to 0x%lx\n", phys_addr, addr);
#else
addr = phys_addr;
#endif /* defined(CONFIG_MMU) || defined(CONFIG_PCIE) */
if (argc < 3) {
width = 32;
} else {
width = strtol(argv[2], NULL, 10);
}
shell_fprintf(sh, SHELL_NORMAL, "Using data width %d\n", width);
if (argc <= 3) {
return memory_read(sh, addr, width);
}
/* If there are more then 3 arguments, that means we are going to write
* this value at the address provided
*/
value = strtol(argv[3], NULL, 16);
shell_fprintf(sh, SHELL_NORMAL, "Writing value 0x%lx\n", value);
return memory_write(sh, addr, width, value);
}
SHELL_CMD_REGISTER(devmem, NULL, "Read/write physical memory\""
"devmem address [width [value]]", cmd_devmem);