This function just stores the buffer pointer passed, so explicitly
mention that the buffer must remain valid while netif itself is
valid. For example, it can't be stored on stack.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add utility function that returns true if given IPv4 address is
a broadcast address. This will be used in later commits to check
received packet IPv4 source and destination addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove extra ntohl() calls when checking IPv4 address against
a subnet address.
Convert also the IPv4 address to be const as the netmask related
functions do not change its value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Even if we do not have wifi network offloading enabled, allow the
application to be compiled just fine. This allows easier
testing of the application even if the board does not support
wifi offloading.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The net_if_ipv6_prefix_get() function will return the proper prefix
for a given IPv6 address and network interface. This is used when
checking which source address should be returned to the caller.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor IPv6 address lifetime timer setting in net_if_addr to support
longer lifetime than 24 days.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The autoconfigured IPv6 addresses that are related to removed
prefix, need also removed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of having one delayed_work struct / IP address, use
only one delayed_work struct for lifetime timer. This saves
over 20 bytes / allocated address struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to inline the net_if_ipv6_addr_lookup_by_iface() function
as it is used multiple times in ipv6.c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function which returns proper network interface to send either
IPv4 or IPv6 network packet to corresponding destination address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function that will return the network interface that would
be used when sending a IPv6 network packet to specific IPv6 destination
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add basic IPv4 Link Local support as described in RFC 3927.
Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This reduces memory overhead on net_if_dhcpv4: 16 bytes vs 120 bytes
before. This might proove to be beneficial when there are many network
interface.
dhcpv4 ROM consumption is now 2132 bytes vs 4224 (many switches removed)
Fixes#8727
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Move struct members around in networking code so that we avoid
unnecessary holes inside structs. No functionality changes by
this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to set the network interface into promiscuous mode
and then receive all the network packets that are received by
that interface.
Fixes#7595
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User is able to set the network interface to promiscuous mode
and query the promisc mode status.
Note that currently this is only supported for ethernet bearer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The problem is that net_if_call_timestamp_cb only checked if the
callback was registered for the PORT which invoked the whole action.
There is a possibility, that the callback will be registered, and packet
A will be passed to eth driver. Before the driver is finished with
packet A, network layer will start handling another packet (B) - so it
will unregister the callback for packet A and register it for B. After
that the network driver will finish processing packet A and invoke the
timestamp callback. The mechanism would then only check if a callback is
registered for the port of the driver and invoke the callback for the
packet that was registered earlier (so A instead of B).
This commit fixes that by storing info not only about the port but about
the packet too.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Allow creation of TX timestamp thread which will collect TX timestamp
information from device drivers. If the callback is registered, then
it will pass that timestamp information to the relevant party for
further processing. This support will be used by gPTP code in
subsequent commits.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Julien Chevrier <julien.chevrier@intel.com>
Add functions that will return correct source IPv4 address
according to given destination address. This is done similar
way as for IPv6.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we have multiple network interfaces and we want to send
a IPv4 network packet to certain destination, then this new
helper can be used to figure out what network interface to use.
Note that this commit only adds support to select the correct network
interface according to destination IPv4 address. This does not enable
any automatic routing to happen.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Drivers will be directly contacted via net_if's offload attribute. No
need for a an extra layer as an L2.
Signed-off-by: Dario Pennisi <dario@iptronix.com>
Signed-off-by: Massimiliano Agneni <massimiliano.agneni@iptronix.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of one global statistics, collect statistics information
separately for each network interface. This per interface statistics
collection is optional but turned on by default. It can be turned
off if needed, in which case only global statistics are collected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The DEVICE_NAME_GET() macro should be used instead of fixed
string when creating a device pointer in net_if_dev structure.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows creation of virtual lan (VLAN) networks. VLAN support is
only available for ethernet network technology.
Fixes#3234
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The __net_if_align was removed in earlier commits but it needs
to come back as in some arch the alignment of net_if section
will be wrong.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With this commit it is possible to add priority to sent or received
network packets. So user is able to send or receive higher priority
packets faster than lower level packets.
The traffic class support is activated by CONFIG_NET_TC_COUNT option.
The TC support uses work queues to separate the traffic. The
priority of the work queue thread specifies the ordering of the
network traffic. Each work queue thread handles traffic to one specific
work queue. Note that you should not enable traffic classes unless
you really need them by your application. Each TC thread needs
stack so this feature requires more memory.
It is possible to disable transmit traffic class support and keep the
receive traffic class support, or vice versa. If both RX and TX traffic
classes are enabled, then both will use the same number of queues
defined by CONFIG_NET_TC_COUNT option.
Fixes#6588
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of always allocating both IPv6 and IPv4 address information
to every network interface, allow more fine grained address
configuration. So it is possible to have IPv6 or IPv4 only network
interfaces.
This commit introduces two new config options:
CONFIG_NET_IF_MAX_IPV4_COUNT and CONFIG_NET_IF_MAX_IPV6_COUNT
which tell how many IP address information structs are allocated
statically. At runtime when network interface is setup, it is then
possible to attach this IP address info struct to a specific
network interface. This can save considerable amount of memory
as the IP address information struct can be quite large (depends
on how many IP addresses user configures in the system).
Note that the value of CONFIG_NET_IF_MAX_IPV4_COUNT and
CONFIG_NET_IF_MAX_IPV6_COUNT should reflect the estimated number of
network interfaces in the system. So if if CONFIG_NET_IF_MAX_IPV6_COUNT
is set to 1 and there are two network interfaces that need IPv6
addresses, then the system will not be able to setup IPv6 addresses to
the second network interface in this case. This scenario might be
just fine if the second network interface is IPv4 only. The net_if.c
will print a warning during startup if mismatch about the counts and
the actual number of network interface is detected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move IP address settings from net_if to separate structs.
This is needed for VLAN support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create infrastructure that allows ethernet device driver to tell
if it supports network packet checksum offloading. This applies only
to IPv4, UDP or TCP checksums. The driver can enable/disable checksum
offloading separately for Tx and Rx network packets.
If the device (ethernet in this case) can calculate the network
packet checksum for IPv4, UDP or TCP, then do not calculate the
corresponding checksum by the stack itself.
Fixes#2987
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can configure hostname of the device in Kconfig. This can
be used by mDNS responder to answer <hostname>.local queries.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There was no handler functions for adding, removing and looking up
IPv4 multicast addresses in the network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create support for registering a callback that will be called
if the device leaves or joins IPv6 multicast group.
Jira: ZEP-1673
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix misspellings in .h files missed during code reviews
and affecting generated API documentation
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Normally network interface is always UP, but Bluetooth
interfaces are down until connected. So if this is the case,
then check the interface status before trying to access variables
that are NULL. This was seen with "net iface" shell command when
BT was enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A half of params were described as "pointer on" (pretty strange
sounding), another half - "pointer to". Use the latter consistently.
Also, minor wording and punctuation changes.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I4ec03eb2183d59ef86ea2c20d956e5d272656837
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- net_pkt becomes a stand-alone structure with network packet meta
information.
- network packet data is still managed through net_buf, mostly named
'frag'.
- net_pkt memory management is done through k_mem_slab
- function got introduced or relevantly renamed to target eithe net_pkt
or net_buf fragments.
- net_buf's sent_list ends up in net_pkt now, and thus helps to save
memory when TCP is enabled.
Change-Id: Ibd5c17df4f75891dec79db723a4c9fc704eb843d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This does not save any space but sets the fields in the
structs in more natural order. Move IPv6 related
fields in net_if into internal ipv6 struct so that all
IPv6 fields are located inside one struct. Same thing
is done for IPv4 fields which are now located inside
IPv4 internal struct in net_if.
There is no functionality changes by this commit.
Change-Id: I7d72ec0a28e2b88c79a4c294655d5ef6da6ccb25
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Shuffle the fields to different order in net_if_addr struct.
This saves space in net_if struct. This saved 4.8% memory,
640 bytes in original versus 608 bytes after this commit, when
allocating net_if using minimal amount of address counts and
IPv4, DHCPv4 and IPv6 enabled.
Change-Id: I591543cded587178cf6f82189953bb2e99c2188a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need a way to know when IPv6 address is successfully set
into network interface.
If IPv6 DAD (Duplicate Address Detection) succeeds or fails,
we send a management event for that. This can be used by
other components to detect when the network interface is in
usable state.
Change-Id: Ifb22415fe21f31f5dba4f55455d6e0f89b414d32
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some of the IPv6 utility functions were missing const in
one of the parameters that are not modified by the corresponding
function.
Change-Id: Ic9fe53daac288570c14423fd9410dcf15d1c5cfa
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The default hop limit is defined in struct net_if. It is possible
that user might want to tweak it for each network packet. For this
purpose, a net_nbuf_set_ipv6_hop_limit(buf) function is created.
Change-Id: I7568330358f80f0f5007d6d3c411c120b043c04f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is part of a patch series to decouple TCP/IP offload, which
currently occurs at the transport layer (L4), from the data link
layer (L2).
- Rename struct net_l2_offload_ip to struct net_offload
- Rename struct field offload_ip to just offload
- Rename include/net/offload_ip.h -> include/net/net_offload.h
Change-Id: I3cd891c2b13e0e8f3ad1c66264f90b5031ae17c2
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
