This commit moves the BT_ISO to a common (host and controller)
Kconfig and fixes the ISO buffers in hci_raw.c
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move common code that may be used by different test units
from main.c to common.c. Main.c should be clean and responsible
for unit tests executioon only. Common functionalities should be
stored in separate file and provided to test source files by
appropriate header file.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add release of memory acquired for periodic advetising sync. set
when:
- advertising set is removed
- advertising parameters are changed and past PDU type was
extended advertising PDU
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Remove LL_ASSERT from functions that return latest advertising PDU.
The LL_ASSERT was raised in situation that there is no memory to
store unused PDUs memory in a pdu_free queue or extra_data_free queue
Those functions return NULL in such sitation. The returned value is
verified by callers by LL_ASSERT. That gives better context if lack
of memory issue issue occurs.
Besides that there was removed a LL_ASSERT from lll_adv_pdu_and_extra_-
data_alloc. The reasons is the same as above, to give better context
when the lack of memory issue occurs.
This function is used in ULL context (ll_adv_sync_ad_data_set).
If it returns NULL the caller will return BT_HCI_ERR_MEM_CAPACITY_-
EXCEEDED to Host.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add set of functions that will make possible to configure
radio Direction Finding Extension to transmit CTE for periodic
advertising.
Some of the new Radio API functions are provided as separate
functions changing the same Radio peripheral registers, e.g.
radio_df_mode_set_aoa, radio_df_mode_set_aod. This is done on
purpose and is related with lack of DFE in nrf52_bsim.
To avoid use of conditionally compiled constants to represent
e.g. CTE mode; separate functions were introduced.
Thanks to that DF unit tests are able to compile successfully
without changes in nrf52_bsim platform. Also if DFE is added
to nrf52_bsim there is no need to change the code until it is
desired.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The storage for extra data is required for implementation of
CTE transmission with periodic advertising.
Data required to transmit CTE correctly are compound of two parts:
- PDU field CTEInfo
- radio configuration to transmit actual constant tone at the end
of PDU.
Extra data is a storage required for radio configuration data.
Nevertheless it must be in compliance with content of CTEInfo field.
Because of that extra data is stored as part of lll_adv_pdu and
is double buffered like PDU memory.
Bluetooth 5.1 spec. allows to enable or disable CTE TX
and change CTE TX parameters when periodic advertising is
enabled. Besides that CTE TX settings may be set before periodic
advertising parameters are set. In such situation ll_adv_sync_set
may be not yet created.
To overcome these constraints ULL should store CTE TX
settings and forward them to LLL only when CTE TX is enabled.
Because of above reasons ULL stores CTE TX settings in ll_adv_set.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Directin Finding related features:
- transmission of connectionless CTE,
- antenna switching during CTE transmission (AoD),
to list of features supported by controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
In the wake of the removal of nRF5340 PDK board we also
remove the support for the nRF5340 Engineering A SoC.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove support for nRF5340 PDK in the BLE controller.
The controller will now support only the nRF5340 DK.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
nRF5340 PDK is removed so there is no reason to keep it
in the list of supported tf-m targets.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
nRF5340 PDK board was deprecated in v2.5.0 release
and is removed now from the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Create a common binding file that will be included by all bindings
handled by iis2iclx driver.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Fix cancel of Periodic Synchronization on Coded PHY. Reset
the association of periodic sync instance after validation
of command disallowed.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
New test that verifies CoAP Acknowledgement initialization function
that create a response packet for given request. Both request and
expected response packets are given in the test as PDU.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
When handling CoAP Confirmable requests, there is a common
Acknowledgement initialization procedure that repeats for each
response packet initialization. This patch adds a function that
simplifies Acknowledgement initialization procedure encapsulating
repeating code.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
By the time hostname configuration was implemented, driver was switching
only between STA and STA+AP modes. After dynamic selection between NONE,
STA, AP and STA+AP was implemented (commit referenced below), hostname
configuration no longer takes effect when ESP chip obtains address over
DHCP (and sends hostname in the DHCP request).
Set hostname each time after enabling STA mode, so that it takes effect
in DHCP requests.
Fixes: 03ce61004b ("drivers: wifi: esp: control CWMODE depending on
current needs")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Generated device and driver names have changed with commits [1] and [2],
but net offload drivers missed the conversion. Update net offload DT
device macros now.
[1] commit 8c1bef535b ("device: support generating defines from
devicetree nodes with no label")
[2] commit f91e9fba51 ("device: fix potential truncation of DT-derived
device names")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Stm32f7 disco boards benefit from dedicated openocd board target.
Use these target as the generic stm32f7discovery one will be
eventually removed.
Additionally, replace now deprecated 'adapter_khz' by 'adapter speed'.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Fixes problem where UART DFU mage uploads via mcumgr get interrupted
by the mcuboot_util logs, causing uploads stuck and fail on time-out.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add device_is_ready check to clock APIs as we might now get the clock
device via DEVICE_DT_GET and thus may not have checked if the clock
controller device is ready.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add some simple depends so we limit various I2C drivers to the SoC
families that the drivers are relevant to.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
On I2C V1 parts, LL_I2C_EnableIT_TX() translates to EVT and BUF
IRQ enabling.
In stm32_i2c_msg_write function, LL_I2C_EnableIT_TX is called right
after stm32_i2c_enable_transfer_interrupts which already enables BUF
IRQ, which starts the transfer.
As a consequence it could happen that transfer is already complete
at the time LL_I2C_EnableIT_TX is called. This case is not expected
by remaining part of the code which loops forever waiting for BUF IRQ
to be raised.
Remove the superfluous LL_I2C_EnableIT_TX call.
Fixes: #32265
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
nRF52840, nRF52810, nRF52811 and nRF52805 are affected by anomaly 242.
This patch introduces workaround for this anomaly as follow:
Power-fail comparator is disabled before any attempt to erase or write.
Either erase or write is not proceed if EVENT_POFWARN is
already asserted.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Introduce support for situation when synchronization back-end
aborts operation before it is done. synchronization API will
transfer operation return code to the driver shim back.
Additionally:
FLASH_OP_ONGOING value was switched to be positive in order to
not been mislead with a negative error code.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Keep OOB Rx channel and interrupt always enabled.
Send callback when packet is received in OOB Rx channel
if asynchronous host-initiated handling is enabled.
Note that driver doesn't perform any buffering from packets,
so access to OOB Rx channel is gated by client's driver
packet retrieval.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Currently assumption is all OOB traffic over eSPI bus is always client
initiated.
Add option for systems where host can initiate OOB traffic.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
The calculated alarm time starts from 2000 but the gmtime_r needs as
input the time from epoch (1970). This causes the alarm time to be
miscalculated due to leap years, as 2000 is a leap year and 1970 is not.
To fix the issue, the 2000 timestamp can be added to the input time of
gmtime_r.
Fixes#32260
Signed-off-by: Antonis Sioutas <antonis.si510@gmail.com>
Work items can be legally resubmitted from within their own handler.
Currently the p4wq detects this case by checking their thread field to
see if it's been set to NULL. But that's a race, because if the item
was NOT resubmitted then it no longer belongs to the queue and may
have been freed or reused or otherwise clobbered legally by user code.
Instead, steal a single bit in the thread struct for this purpose.
This patch adds a K_CALLBACK_STATE bit in user_options and documents
it in such a way (as being intended for "callback manager" utilities)
that it can't be used recursively or otherwise collide.
Fixes#32052
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When address resolution is disabled, an identity address has
been added into the resolving list with peer IRK, and device
privacy has not been selected for the peer device then
connection indication shall not be sent to the peer that is
advertising using its identity address.
Fixes#24731.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
