bsim test build system hides compile warnings.
The problem had been fixed before but due to a regression came again.
This commit adds extra cc flags to prevent this.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Update the API overview documentation to note that the CAN API was
changed in the upcoming Zephyr v3.0 release.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Change the can_tx_callback_t function signature to use an "int" (not an
uint32_t) for representing transmission errors.
The "error" callback function parameter is functionally equivalent to
the return value from can_send() and thus needs to use the same data
type and needs to be able to hold negative errno values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The driver performs AT commands configurations using the
system workqueue, this can delay the workqueue by up to 6
seconds to wait for the modem replies, which isn't ideal.
This PR creates a dedicated workqueue for the gsm, and
provides a helper function to reschedule work items to the
gsm workqueue.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
STOP command was issued in the same transmission message
and as from esp-idf, this should be moved into a new
transmission.
Although it works in most scenarios, SHT3X sensor is one
case that presents reading error.
Closes#41385
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The pinsN group name can be a confusing in some circumstances, so change
it to groupN. Some platforms (e.g. nrf or gd32) are already using
groupN. Documentation and API tests have been updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The PINCTRL_DT_(INST_)DEFINE macros already defined the trailing ;,
making its usage inconsistent with other macros such as
DEVICE_DT_DEFINE.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Enable ARCH_EXCEPT macro for non-usermode scenario for RISC-V
Macro will now raise an illegal instruction exception so that mepc will
hold expected value in exception handler, and generated coredump can
reconstruct the failing stack
Coredump tests running on renode (for RISC-V) can now utilize fatal error
path through k_panic
Signed-off-by: Mark Holden <mholden@fb.com>
Added framework for concurrency testing. Framework setup multiple
priority contexts and executes user handlers in that context. Test
terminates after certain number of repetitions or preemptions or
when timeout occurs. It can also be aborted by the user.
Framework can be used for testing resiliency to preemptions.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
PR #38482 made the sam0 i2c send NACK when receiving a single message
Fixes#38878Fixes#41016
Signed-off-by: Christoffer Zakrisson <rustypig91@gmail.com>
Update Controller implementation of Advertising Extensions
to inherit the set dynamic Tx power values of the primary
channel PDU transmissions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In MCUboot:
commit 4aa286d2db2d02a8f0ff29cdc3304f3185dbe261
Author: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Date: Wed Nov 24 14:54:56 2021 -0300
flash_map: Increase minimum supported write align via
flash_area_align
MCUboot changed the type of the alignment value in flash from a uint8_t
to a uint32_t. Indeed, Zephyr contains flash devices that have a larger
alignment than will fit in an 8-bit value. This generally means that
`flash_area_align` will just return 0 on these platforms.
Change call in Zephyr as well.
This shouldn't cause any observable behavior changes in Zephyr, other
than making some cases that don't work currently begin to work. If a
client is storing these results in a u8, it will be truncated, the same
as things were previously. If, however, the caller is prepared to
handle a larger type, this will result in having correct information,
instead of the truncated value.
Signed-off-by: David Brown <david.brown@linaro.org>
Rename the variable drop to accept to avoid multiple use of
negations in the implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use DUP_FILTER_DISABLED define instead of magic value to
represent duplicate filtering being disabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the ISO BabbleSim test to use Periodic Sync Receive
enable command to disable Periodic Sync reports and yet
receive the BIGInfo report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update support for Periodic Advertising Synchronization
Receive Enable command, so that PDUs are received so that
contents of Extended Common Payload Format is parsed and
process for information like Channel Map Update and BIGInfo.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update the system drivers section: remove references to
SYS_DEVICE_DEFINE, add references to the SYS_INIT() macro.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
SYS_INIT can be used for the same purpose, what is being run is simply
an initialization hook.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
SYS_INIT can be used for the same purpose, what is being run is simply
an initialization hook.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
If there are no console messages input at an interval of 15
seconds, the system will be able to enter suspend mode.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Direct SMPS is the default configuration out of the box of:
* stm32h474i_disco
* stm32h735g_disco
Fixes#34732
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Add length checks before calls to net_buf_add_mem
for dynamically sized data.
This should give a better error response than hitting
the __ASSERT in net_buf_simple_add.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit adds 3 tests that check:
- Publish period state
- Publish retransmit count and interval steps states
- Canceling periodic publication and publication retransmission
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Period measurement should be started right after a message is updated.
That is because `struct bt_mesh_send_cb.start` callback is called from
the advertiser thread which is not necessary to be scheduled immeditely
and a user may see some delays between update handler calls.
The publication timer still needs to be scheduled after a message being
actually sent out to the air so that access layer doesn't overflow the
advertiser's buffer. To achieve some specific use cases, where a
published message needs to be retransmitted with 50ms interval, a user
has to switch off network retransmissions to make the legacy advertiser
sleep for the shortest possible time.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
some build error due to adding rt11xx support without testing
update mclk enable to avoid add pinmux driver
note:
some other PRs still in progress to full enable i2s on rt platform
this fixing: #41153
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
We used to test that the compiler works at all, before testing
compiler flags. But during some toolchain refactoring this got
re-arranged.
This commit corrects the ordering.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This test cannot be built for thingy52_nrf52832, as this board uses
regulator devices that need the SX1509B GPIO expander driver that
in turn depends on I2C which needs to be disabled in this test.
Commit b579c12714 addressed a similar
problem for hsdk platforms by excluding those. Use the same solution.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Added note for clarification on setting limitation
for secure/non-secure domains isolation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Specify in the API that the callback must be registered before the
channel is enabled, fix the NRFX IPC driver to be compliant and change
the MBOX sample.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Support the ST STM32G081B Evaluation board with STM32G081RB SoC
Tested with:
- `samples/basic/blinky`
- `samples/basic/button`
Flashed samples via On-Board ST-LINK with:
- west flash
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Update the hal_nordic module revision to fix a copy-paste bug in
the nrfx_pwm driver that prevents PWM pins from being configured.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Bsim devices work asynchronously before access to Phy.
Interprocess OOB communication might be broken because of this.
PR adds synchronization for devices. Drift is 100ms between them.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Wrong variable was passed when isr_done was registered. It lead to
memory faults and exceptions. It should be a pointer to lll_adv_sync
instance instead of lll_adv.
The commit fixes the issue.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix dts leds configuration for this board as they actually light up
active when pin is set to 0.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Fix a problem introduced in 6ea54db334 that caused the poll operation to
take 10x more time than intended.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
