The code used the name DFDSPBRCP referring to the DSP Boot / Recovery
Capability Pointer register from DSP Subsystem Capability / Status
Registers range. The address used, however, pointed to DSP Core Shim
(DSPCS) registers block. Changed define names to not be misleading.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
In case user didn't set mac address in any way (locally defined or
randomly generated), define mac address using device unique id.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Deprecate Kconfig mac address related symbols and replace by existing
device tree properties:
- local-mac-address
- zephyr,random-mac-address
User who wants to keep using deprecating method of defining random
MAC address using Kconfig should set CONFIG_ETH_STM32_HAL_RANDOM_MAC=y.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order to ease deprecation of these methods (in favor of dt based
configuration), introduce a choice for MAC address configuration method.
Default to random method (no change).
User wanting to still use ETH_STM32_HAL_MACX symbols should define
CONFIG_ETH_STM32_HAL_USER_STATIC_MAC=y
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Align configuration for nrf52840dk to use the same loopback pins
for uart_async_api and uart_mix_fifo_poll tests.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
RISC-V has a modular design. Some hardware with a custom interrupt
controller needs a bit more work to lock / unlock IRQs.
Account for this hardware by introducing a set of new
z_soc_irq_* functions that can override the default behaviour.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Setting a detected packet family (ipv4 or ipv6) in net_context level
instead in lower layers for AF_PACKET/SOCK_RAW/IPPROTO_RAW type sockets
when sending data.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
When a libc partition exists, all user mode threads will need access to
libc variables. Add the libc partition in this test case to allow that.
This was detected by running the test on ARM32 with thread local storage
enabled as that uses z_arm_tls_ptr which is included in the libc partition.
Signed-off-by: Keith Packard <keithp@keithp.com>
Clear the `ATT_CONNECTED` flag when a channel is detached (could be after
an ATT timeout).
Also convert the assert checking it in `chan send` to an `if` test, since
the channel could be disconnected from a different thread than the one
triggering `chan_send`.
Fixes#53247.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
esf_get_sp is used only when CONFIG_THREAD_STACK_INFO is enabled.
Just move this function around to be inside an ifdef guard.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Drop compatible from fuel-gauge.yaml, it's not needed since this binding
is not meant to be used directly, and is also incorrect as it includes
the "yaml" suffix.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
BUCK1/2 are defined as "always on" regulators, however, there is a
special override register that allows to turn them on/off.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some regulators are enabled by default, however, such condition cannot
be captured now by the regulator driver API. Refactor
regulator_common_init_enable to regulator_common_init (enable removed,
as it also sets mode) and add a new argument to specify such condition.
With this change, regulator_disable() and regulator_is_enabled() work as
expected without a first call to regulator_enable().
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Change the BT_AUDIO_ISO logging module to use
log_config_inherit to be consistent with the other LE Audio
logging modules.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Vbus detection is required by self-powered, with external non-USB
supply, devices to have an operational USB peripheral. The voltage
sensing, when enabled, is performed via a designated pin (PA9 is
the most common).
For greater details see section 2.6, ST application note AN4879.
Signed-off-by: Raul Pando <raul.pando@bytegrity.co.uk>
The TinyCrypt is the current library used by UpdateHub to perform
SHA-256 integrity check. This refactor code and add support to
mbedTLS library. It changes default library to mbedTLS to use
hardware accelerator when available.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Currently choice for FLASH_AREA_CHECK_INTEGRITY does not have a
denomination. Without that it is not possible select a default
backend hash backend for integrity check at project configuration.
This add a name to allow select flash area check integrity backend.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
ISO Synchronized Receiver only builds do not transmit and
hence may not have any tx buffers allocated in a
Controller, leaving bt_dev.le.acl_pkts semaphore
uninitialized or bt_conn_get_pkts() returning NULL.
Do not use the semaphore if no Tx buffers allocated in a
Controller.
Regression in commit ef19c64f1b ("Bluetooth: host: poll on
CTLR buffers instead of host TX queue").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added UUIDs for Telephony and Media Audio Service
(0x1855) and Public Broadcast Announcement (0x1856).
Fixes#53488
Signed-off-by: Mark Watson <markus.c.watson@gmail.com>
Add common function to handle large GATT reads of strings.
Initialize the buffer pointers in the net_buf which is used for large
GATT reads by bt_tbs_client_read_call_state() and
bt_tbs_client_read_current_calls().
Define the size of the allocated buffer based on the enabled features.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
The way that the braodcast clause for handling failing
ISO data path would end up in the __ASSERT. It has been
slightly modified to make it use if-else properly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The direction of a stream/endpoint/parameter has just been
logged as a unsigned integer. This commits adds a
value -> string internal function that would log
BT_AUDIO_DIR_SINK as "sink" and BT_AUDIO_DIR_SOURCE
as "source".
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The old random timer test was not random-looking
enough on some platforms.
Replace with new test which is psuedo-xoshiro.
The generator is still deterministic
and does not depend on entropy at all,
but should look more random for testing.
Change name of generator tree-wide also.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
When using watchdog which doesn't support callbacks (e.g. STM32 IWDG)
it's very useful to have counter based watchdog with shorter timeout.
This way we can gather useful information before IWDG resets SOC.
In above case it's usually not desired to reset SOC when counter
watchdog is triggerd, because we can lose information about reset cause.
For example, STM32 can determine if the reset was caused by watchdog.
Another use case for counter watchdog without SOC reset is to detect
slow code paths.
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Some RISC-V SoCs implement a mechanism for hardware supported stacking /
unstacking of registers during ISR / exceptions. What happens is that on
ISR / exception entry part of the context is automatically saved by the
hardware on the stack without software intervention, and the same part
of the context is restored by the hardware usually on mret.
This is currently not yet supported by Zephyr, where the full context
must be saved by software in the full fledged ESF. This patcheset is
trying to address exactly this case.
At least three things are needed to support in a general fashion this
problem: (1) a way to store in software only the part of the ESF not
already stacked by hardware, (2) a way to restore in software only the
part of the context that is not going to be restored by hardware and (3)
a way to define a custom ESF.
Point (3) is important because the full ESF frame is now composed by a
custom part depending on the hardware (that can choose which register to
stack / unstack and the order they are saved onto the stack) and a part
defined in software for the remaining part of the context.
In this patch a new CONFIG_RISCV_SOC_HAS_ISR_STACKING is introduced that
enables the code path supporting the three points by the mean of three
macros that must be implemented by the user in a soc_stacking.h file:
SOC_ISR_SW_STACKING, SOC_ISR_SW_UNSTACKING and SOC_ISR_STACKING_ESF
(refer to the symbol help for more details).
This is an example of soc_isr_stacking.h for an hardware that doesn't do
any hardware stacking / unstacking but everything is managed in
software:
#ifndef __SOC_ISR_STACKING
#define __SOC_ISR_STACKING
#if !defined(_ASMLANGUAGE)
#define SOC_ISR_STACKING_ESF_DECLARE \
struct __esf { \
unsigned long ra; \
unsigned long t0; \
unsigned long t1; \
unsigned long t2; \
unsigned long t3; \
unsigned long t4; \
unsigned long t5; \
unsigned long t6; \
unsigned long a0; \
unsigned long a1; \
unsigned long a2; \
unsigned long a3; \
unsigned long a4; \
unsigned long a5; \
unsigned long a6; \
unsigned long a7; \
unsigned long mepc; \
unsigned long mstatus; \
unsigned long s0; \
} __aligned(16)
#else
#define SOC_ISR_SW_STACKING \
addi sp, sp, -__z_arch_esf_t_SIZEOF; \
DO_CALLER_SAVED(sr);
#define SOC_ISR_SW_UNSTACKING \
DO_CALLER_SAVED(lr);
#endif /* _ASMLANGUAGE */
#endif /* __SOC_ISR_STACKING */
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
* This board was originally configured through its Kconfig to use LSE
instead of LSI for the RTC source clock, so the dts is updated
accordingly.
* Remove the RTC source clock symbol from the Kconfig since it is now
deprecated.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Now that both RTC source clock Kconfig symbols are disabled by default,
we invert the ifdef so that in the absence of configuration we still
fall in the LSI configuration.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
