This commit adds unit tests for the SO_REUSEPORT sockets option. It also
fixes some bugs in other tests triggered by the new features.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
This commits adds support for the SO_REUSEPORT socket option.
The implementation follows the behavior of BSD and tries to also follow
the specific additional features of linux with the following
limitations:
* SO_REUSEADDR and SO_REUSEPORT are not "the same" for client sockets,
as we do not have a trivial way so identify a socket as "client"
during binding. To get the Linux behavior, one has to use SO_REUSEPORT
with Zephyr
* No prevention of "port hijacking"
* No support for the load balancing stuff for incoming
packets/connections
There is also a new Kconfig option to control this feature, which is
enabled by default if TCP or UDP is enabled.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
This commit adds unit tests for the SO_REUSEADDR socket option to test
the different possible scenarios for the option to work correctly.
There is also a fix for the TCP testsuite to make a now failing test
pass again due to a TIME_WAIT socket.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
This commit adds support for the SO_REUSEADDR option to be enabled for
a socket using setsockopt(). With this option, it is possible to bind
multiple sockets to the same local IP address / port combination, when
one of the IP address is unspecified (ANY_ADDR).
The implementation strictly follows the BSD implementation and tries to
follow the Linux implementation as close as possible. However, there is
one limitation: for client sockets, the Linux implementation of
SO_REUSEADDR behaves exactly like the one for SO_REUSEPORT and enables
multiple sockets to have exactly the same specific IP address / port
combination. This behavior is not possible with this implementation, as
there is no trivial way to identify a socket to be a client socket
during the bind() call. For this behavior, one has to use the
SO_REUSEPORT option in Zephyr.
There is also a new Kconfig to control this feature similar to other
socket options: CONFIG_NET_CONTEXT_REUSEADDR. This option is enabled by
default if TCP or UDP are enabled. However, it can still be disabled
explicitly.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
If coverage is provided by a different platform not in the integration
list, it should not be reported as error.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This platform (SOC_SERIES_EFM32PG1B) is also using SOC_GECKO_SERIES1 and
needs a pinctrl device defined to build the gecko-uart driver
successfully.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Some SDK power macros are no longer available in the header
file. Add local defines in Zephyr.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The SDK function ENET_SetCallback is deprecated and has
been removed in the latest SDK.
Update the driver to set the callback during Init by using
the callback config param.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Adds saving of the last lv_indev_data_t for button and pointer type
devices. This is needed because there is currently no way to tell LVGL in
the read callback that no event is pending. Preservation of the last state
is expected to happen in the port layer for the input devices.
This resolves issue #62512.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Log modules should be registered with LOG_MODULE_REGISTER
rather than LOG_MODULE_DECLARE. It seems the latter works
on most platforms (at least with in minimal mode as configured
with ZTest).
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
bsearch() tries to find the exact match for the key, otherwise it
returns NULL. However, here we want to find two elements our key lies
in-between. This requires some rather complicated logic that pretends
it found the exact match even if it didn't. Replace this with a simple
implementation of binary search.
Signed-off-by: Paweł Anikiel <pan@semihalf.com>
The value of n_comp is wrong for ntc-thermistor-generic. Introduce a
helper macro to compute n_comp correctly for both thermistor types.
Signed-off-by: Paweł Anikiel <pan@semihalf.com>
The pullup resistance was assumed to be the maximum ADC value. This is
incorrect when the reference ADC voltage and the thermistor pullup
voltage differ. Use the pullup_uv property from DT instead.
The equations for the thermistor resistance are also wrong. The correct
equations are (see https://en.wikipedia.org/wiki/Voltage_divider):
R1 = R2 * (Vin / Vout - 1)
for the positive-connected resistor, and
R2 = R1 * (Vin / Vout - 1)^-1
for the negative-connected resistor. These were transformed so that
they can be computed using integer math.
Signed-off-by: Paweł Anikiel <pan@semihalf.com>
MODEM_GSM_PPP is deprecated in favor of using the new
MODEM_CELLULAR driver.
Directly related to this are UART_MUX and GSM_MUX. These are also
being deprecated.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
GSM_MUX and UART_MUX are being marked as deprecated.
The new modem subsystem MODEM_CMUX and MODEM_PPP
should be used instead.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Fix the order of setting the flag that indicates that
preempt timeout has been successfully requested versus
the request is waiting to be scheduled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker implementation to prefer to keep ticker node
started in case of race condition to start and stop.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
While matching source address for a given Link-Local destination the
functions iterate over interfaces and return a first result with a
valid LL-address. However, they should first try to fetch address of
the default interface as it not always the first one on the list.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Allow Bootstrap server to close the DTLS connection immediately
after receiving Ack to Bootstrap-Finish command.
This is not an error as either parties are allowed to tear down
the connection.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Allow certain RD-client states to timeout.
As stated in LwM2M specification:
The bootstrap procedure failed when the LwM2M Client did not
receive the "Bootstrap-Finish" operation after the
EXCHANGE_LIFETIME time period expired.
The EXCHANGE_LIFETIME parameter is defined in RFC 7252
We must handle the case where Bootstrap server is not sending
information towards us.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add state checks for the get_id and get_base functions, as the
ID and base are not valid when the state of the broadcast
source is BT_BAP_EP_STATE_IDLE.
Since the broadcast_source_get_state uses the slist functions,
the broadcast source object for bt_bap_broadcast_source_get_id
can no longer be `const`.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use the new code-sample directive and roles to document the networking
samples so that they show up as "Related samples" when browsing the
various relevant networking APIs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Use the new code-sample directive and roles to document the video
capture samples so that they show up as "Related samples" when browsing
the API documentation.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Clarified the impact of CONFIG_NET_INTERFACE_NAME Kconfig option
as it can change how SO_BINDTODEVICE BSD socket option behaves.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If asserts are disabled, there is a warning in 'otPlatCryptoInit'
regarding unused variable `err`. This commit fixes that.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
Use the defind value, BT_APPEARANCE_WEARABLE_AUDIO_DEVICE_EARBUD,
instead of the hard coded "magic numbers".
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The sample did not properly include the source
context in the advertising data.
It also set different contexts for PACS and the advertising data
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Synchronizes with the new upstream RX/TX timestamp definition in
OpenThread based on the standard's SFD.
This change is synchronized with the upstream OpenThread implementation
via west.yml.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Fixed broken MCUmgr client unit test.
Added test_ -prefix to tests.
Added testcase.yaml to test trigger test run.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
When publish buffer run out, no thread active process work.
Fix this, by reschedule process work.
Signed-off-by: Weiwei Guo <guoweiwei@syriusrobotics.com>
