Currently, the timer is stopped:
- in the timer handler, when the buffer is full, or
- in work handler, when time's up
In any cases, the work handler is bounded to run to print
the message, so we can kill the timer there instead.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Added:
- `clear` to discard the buffer without printing
- `info` to print info about the buffer and if the
profiler is running
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
"Perf is already running" works for `record` but is a little
strange when doing `printbuf`, so remove the "already" to
make it more universal.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The `buf_full` flag is set when it is full, but dumping the
buf currently only resets the `idx`, this means that the perf
command only works when the buffer hasn't been full before.
Reset the flag when we clear the buffer.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
`PERF_EVENT_TRACING_BUF_OVERFLOW` isn't used, remove it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
`cmd_perf` isn't doing anything meaningful, remove it so that
the help message will be printed when invoked. Updated
the help message of the main command.
```
uart:~$ perf
perf - Lightweight profiler
Subcommands:
record : Start recording for <duration> ms on <frequency> Hz
Usage: record <duration> <frequency>
printbuf : Print the perf buffer
```
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
static perf_data is zero-initialized by default, there's no
need to explicitly set `idx` to `0`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Introduce list mode in Zephyr-sdk module package.
The list mode allows to list all Zephyr SDK's found in the system
without loading any of them.
Signature of the list mode is:
> find_package(Zephyr-sdk COMPONENTS LIST)
Will print valid Zephyr SDKs and their path, as well as defining the
following corresponding CMake lists:
- Zephyr-sdk : List of Zephyr SDKs' version
- Zephyr-sdk_DIRS : List of Directories with a valid Zephyr SDK.
Each entry in Zephyr-sdk corresponds to the same entry index in the
Zephyr-sdk_DIRS list.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Minor cleanup of the FindZephyr-sdk.cmake module.
- Honor the QUIET flag on find_package(Zephyr-sdk QUIET)
Do not print messages when caller has specified QUIET in the
'find_package()' call.
- include Zephyr extensions CMake module.
FindZephyr-sdk.cmake uses zephyr_get() from extensions.cmake, and
therefore the proper thing to do is to include said module in order
to have the package re-usable.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Install the default delegate for reporting the CAN core clock frequency at
driver instance initialization. This allows using the default clock
configuration when not using ztest.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This patch contains big-endian version of the macros present in that
file. The new code is formatted by clang-format, which is why the
formatting is different.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This assert cannot be turned on, as `pdu` will be NULL sometimes. This
is okay, it just means that the current channel doesn't have anything to
send and that we should probably try another one.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Disable input buffer full interrupt for 60h/64h and 62h/66 ports by
calling interrupt controller API. The API has barrier mechanism to
ensure that a thread's requirement to disable peripheral interrupt
takes effect before enabling CPU interrupt. Therefore, the disabling
operation does not occur in ISR and results in interrupt 0 symptom.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
The Audio integration PLL is faster on PTL compared to earlier ACE
platforms: 442.368 MHz instead 393.216 MHz, however the default
divider remained 16, which will result incorrect cardinal clock speed.
Change the divider to 18 in order to get correct 24.576 MHz cardinal
clock.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Add power management support for Apollo3/Apollo3P SPI, and
automatically enables device runtime power management
Signed-off-by: Zhengwei Wang <zwang@ambiq.com>
Add power management support for Apollo3/Apollo3P I2C, and
automatically enables device runtime power management
Signed-off-by: Zhengwei Wang <zwang@ambiq.com>
Add power management support for Apollo3/Apollo3P UART, and
automatically enables device runtime power management
Signed-off-by: Zhengwei Wang <zwang@ambiq.com>
Add initial support for npcm400 evaluation board
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: James Chiang <cpchiang1@nuvoton.com>
Signed-off-by: Joseph Liu <kwliu@nuvoton.com>
Add initial support for nuvoton npcm400, which is a chip
family of Satellite Management Controller(SMC).
Add ecst python scripts to append the header used by ROM Code
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: James Chiang <cpchiang1@nuvoton.com>
Signed-off-by: Joseph Liu <kwliu@nuvoton.com>
Config to enable VLAN promiscuous and untagged.
Config to enable SI message interrupt.
Fix the build warning.
Signed-off-by: Ha Duong Quang <ha.duongquang@nxp.com>
Create the set FD mode function because the old
RTD function is updated to static.
Fix the build warning by update the type of buffidx
and u32SysStatus arguments in the callback function
to uint32_t.
Signed-off-by: Ha Duong Quang <ha.duongquang@nxp.com>
Fixing 3 issues:
1. The mask can be wrong if the alarm register is
set to a MAX value because the alarm bit is the
highest in the alarm register. The mask is now
generated by checking the AE_x bits in the time
registers.
2. Fixing possible NULL pointer exception in
alarm_set_time API. timeptr can be set to NULL
with mask 0 in the alarm_set_time function.
The regs variable for the I2C communication
is written with the correct value from timeptr
only when the right bit in the mask is set.
3. rv8263c8_alarm_set_time() now resets the
alarm status.
4. Interrupts are now enabled by using
rv8263c8_alarm_set_time() rather than when
setting an alarm callback.
Signed-off-by: Daniel Kampert <DanielKampert@kampis-elektroecke.de>
Adds commands for triggering conn_mgr functions and
tweaking conn_mgr connectivity flags.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Add functional test for flash_erase().
Add negative tests for flash_read(), flas_write(), flash_erase(),
flash_fill() and flash_flatten().
Add functional test for flash page layout.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
For Enterprise crypto MbedTLS needs more heap either separate pool or
libc heap, based on experiments 55000 was arrived for a successful
WPA2-EAP-TLS association.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add basic WPA2 EAP-TLS support.
Also, add test infrasturcture esp. the certification handling,
non-certificate credentials are take as runtime input and certificated
are build time input for testing.
A real application can set certificates at runtime too.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Keep WIFI_SECURITY_TYPE_EAP, and define WIFI_SECURITY_TYPE_EAP_TLS
same value as WIFI_SECURITY_TYPE_EAP to make it backwards
compatible. Ready to support more EAP type in the comming PR.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Wipe partition header prior to fatfs testsuite starting. This insures
that the disk will be in an unformatted state at the start of the test,
so the first fs_mount() calls will fail as expected.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
