Introduce a new API to allow devices capable of wake up the system
register themselves was wake up sources. This permits applications to
select the most appropriate way to wake up the system when it is
suspended.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Just using a simple atomic for flags instead of using an array.
While is neat using ATOMIC_DEFINE for future proof. The reality is
that it brings some problem for the wakeup source implementation
that needs to statically initialize it during the device definition.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Update zephyr side to handle hal_nxp using cmake-ext/kconfig-ext. This
allows for having zephyr specific integration code live with the zephyr
source tree.
For now on the cmake side we just use add_subdirectory() of the hal_nxp
repo so the integration is effectively transparent.
For Kconfig we add a place holder Kconfig file since the hal_nxp repo
doesn't have any Kconfig files in it currently.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add config macro to set interrupt as level triggered for ARM CPUs
Merge all timer configures into one place, then no need to overwrite
hpet_timer_conf_get/set() functions in SoC layer
Make hpet_timer_comparator_set() as the only register access function
to implemented in the SoC layer
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
When transmitting a frame, inform the radio driver whether
security processing and/or header updates are needed or not.
When a frame was transmitted, inform back to OpenThread whether
the security procedure and/or header updates were completed for
the frame or not.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
According to Atmel SAM datasheet when writing data to the latch buffer
"32-bit words must be written continuously, in either ascending or
descending order. Writing the latch buffer in a random order is not
permitted." To enforce the requirement we need to call a memory barrier
instruction after copying every word of data to the latch buffer. In
the absensce of __DSB() call the ARM processor is free to change order
of AHB transfers. This has caused the driver to occasionally corrupt
data programmed in the flash.
Fixes#37515
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
As 0.13 SDK is available and used in upstream verification by
default we can allow Zephyr toolchain for ARCv3 64bit boards.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The file <board>.dts_compiled was made obsolete in 8d8b06978c.
<board>.dts_compiled contains only a reference to zephyr.dts.
Users interested in devicetree should be familiar with zephyr.dts,
therefore it's time to remove the unused <board>.dts_compiled.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Description was falsely static that macros statically creates
the ring buffer objects. Clarify description since variables
are not static.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The psoc6 SoC has 2 cores, each with different allowed priority ranges:
CM0: 0-3 (2 bits of NVIC prio, no prio reserved by the kernel)
CM4: 0-6 (3 bits of NVIC prio, one level reserved by the kernel)
Since some of the peripherals are only available to the CM4, those
should be set to a priority that is actually valid for it. In this case
the lowest possible one is 6, so transition from 7 to 6.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This is a follow-up to commit 954dfa755b.
Apply adjustments made in the i2s_api test to the i2s_speed one so that
it can also be executed successfully on the nRF DK boards.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
If HCI LE Set Extended Advertising Enable command is sent
again for an advertising set while that set is enabled, then
any change to the random address shall take effect.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Test advertising re-enable to cover reset of event counter,
duration and the number of events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Permit enabling already enabled advertising. Enabling
advertising when it is already enabled can cause the
random address to change, as specified in the Bluetooth
Specifications.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit increases number of available serialization buffers to
account for possible delays caused by serialization itself and
processing on the application core.
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
By default ICMP desination unreachable error packets are generated when
input packets target ports that are not in a listening state. This not
only reveals the presence of the host on the network which may be
considered a security vulnerability depending on the application, it
also ends up triggering ARP lookups to respond to the sending host. With
a small ARP table and a network where there may be broadcast (or
multicast) service discovery traffic such as mDNS or uPnP, ARP table
thrashing can occur impacting network stack performance.
Signed-off-by: Berend Ozceri <berend@recogni.com>
add a config CONFIG_QEMU_UEFI_BOOT to indicate whether
the qemu will use UEFI bootable method;
add a new test "sample.basic.helloworld.uefi" to verify
UEFT bootable method on qemu_x86_64 platform.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
When enabling MSI & MSI-X, the code seemed to handle fallback to MSI
when MSI-X is not available, but the logic uses MSI-X even if not
available and the MSI path never gets used.
Fixes: a2491b321e ("drivers/pcie: Add support for MSI-X")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
When building on non-X86 platforms K_MEM_PERM_RW gets undefined.
Fixes: a2491b321e ("drivers/pcie: Add support for MSI-X")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Introduce a bugfix for CONFIG_OPENTHREAD_CUSTOM_PARAMETERS handling in
OpenThread build system integration for Zephyr.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The latest MESH.TS 1.0.1.2 4.15.10 Appkey List Procedures
MESH/NODE/CFG/AKL/BI-04-C
Verify that the IUT can respond to an Config AppKey Add
message with NetKeyIndex and AppKeyIndex already stored.
6. Repeat step 1 with the same AppKey, the same
AppKeyIndex, but NetKeyIndex field set to 0x001.
7. The Lower Tester expects the IUT to respond
with an Config AppKey Status message with the
Status field set to 0x04 (Invalid NetKey) and
the NetKeyIndex and AppKeyIndex values equal to
those sent in step 5.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The function to execute shell commands: shell_execute_cmd will now
behave similarly to invoking command line commands.
I.e. after the command is executed the command buffer is cleared,
while the cursor is set to the initial position.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
I saw a user wondering what this is for and and where it comes from.
Provide a comment header with some explanation and a pointer to where
to find out more.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fix the missing resumption of connectable advertising and
release of received connection complete buffers from LLL
after detecting connection from same peer.
Relates to commit 010c5c2f20 ("Bluetooth: controller:
Ignore connections from same peer").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Metaware assembler doesn't accept '@' symbol in the beginning
of symbol name like GNU does.
Drop excessive '@' for _curr_cpu symbol.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The constructors of static objects are stored in ".ctors"
section. In case of MWDT toolchain we have incompatible
".ctors" section format with GNU toolchain. So let's use
initialization code provided by MWDT instead of Zephyr one
in case of MWDT toolchain usage.
As it is done for GNU toolchain We call constructors of
static objects but we don't call destructors for them.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Convert ws2812 LED strip driver to `spi_dt_spec`. Also moves the init
function implementation outside the declaration macro.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Convert the at2x eeprom driver to `spi_dt_spec` and `i2c_dt_spec`.
I2C functions are not fully converted due to the non-standard addressing
scheme.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
