Separate wifi example user config file to wifi network configurations
and hostap configurations.
User can set EXTRA_CONF_FILE as overlay-hostap.conf file to get
external hostap support.
Without overlay-hostap.conf, we will have embedded hostap.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Using PINCTRL_DT_DEFINE from a C++ file cause a
"designator order field" error.
This updates Z_PINCTRL_STATE_INIT to respect the same order as
defined in struct pinctrl_state.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
This is follow up to commit:
modules: hal_nordic: dvfs: added callback when scaling done
Used get and set timer user data functions.
Added missing help text in KConfig.
Signed-off-by: Lukasz Stepnicki <lukasz.stepnicki@nordicsemi.no>
Add cancel action wait ops to cancel remain on channel after TX on
specific channel, in case we need to remain on another channel later.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
LJ packages have 16 ADC channels vs 8 for SZ packages. Enhance
devicetree to account for this as well as conditional defines/code.
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Due to Apollo3's internal bootloader, zephyr build is not able
to create correct flash address on linker.cmd while using
mcuboot. The PR configures flash-controller start address
to solve this problem.
Test board: rakwireless/rak11720
Test project: samples/subsys/mgmt/mcumgr/smp_svr
Signed-off-by: Sercan Erat <sercanerat@gmail.com>
This patch refactors the power management initialization for the Intel
ADSP GPDMA driver. The changes include:
1. Replacing the conditional initialization of power management state
with a call to `pm_device_driver_init` in the `intel_adsp_gpdma_init`
function.
2. Ensuring that the GPDMA driver is initialized with the appropriate
power management state and that runtime power management is
automatically enabled based on the device tree configuration.
These changes streamline the power management initialization process and
ensure consistency with other drivers.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This patch refactors the power management initialization for the SSP
driver across ACE15, ACE20, and ACE30 generations to align with the
recommended practices outlined in the documentation. The changes
include:
1. Replacing the conditional initialization of power management state
with a call to `pm_device_driver_init` in the `ssp_init` function.
2. Adding the `zephyr,pm-device-runtime-auto` property to the SSP nodes
in the device tree files for ACE15, ACE20, and ACE30.
3. Moving the power domain assignment for the SSP device in the device
tree. The previous configuration resulted in the device not being under
any power domain and being initialized as always ON.
These changes ensure that the SSP driver is initialized with the
appropriate power management state and that runtime power management is
automatically enabled based on the device tree configuration. The
functionality of the power management state remains unchanged, ensuring
consistent behavior.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This patch refactors the power management initialization for the DMIC
driver across ACE15, ACE20, and ACE30 generations to align with the
recommended practices outlined in the documentation. The changes
include:
1. Replacing the conditional initialization of power management state
with a call to `pm_device_driver_init` in the
`dai_dmic_initialize_device` function.
2. Adding the `zephyr,pm-device-runtime-auto` property to the DMIC nodes
in the device tree files for ACE15, ACE20, and ACE30.
These changes ensure that the DMIC driver is initialized with the
appropriate power management state and that runtime power management is
automatically enabled based on the device tree configuration. The
functionality of the power management state remains unchanged, ensuring
consistent behavior.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This patch addresses the issue of invalid initialization sequence and
the use of registers in `dma_config` before the device is fully
initialized in the Intel ADSP HDA DMA driver.
Changes include:
1. Moving the `intel_adsp_hda_channels_init` call to the
`intel_adsp_hda_dma_init` function to ensure that channels are
initialized during device initialization.
2. Removing the redundant call to `intel_adsp_hda_channels_init` from
the `PM_DEVICE_ACTION_RESUME` case in the
`intel_adsp_hda_dma_pm_action` function.
These changes ensure that the device and its channels are properly
initialized before any DMA configuration is performed, preventing access
to hardware registers before the device is ready.
**Note:** This is a proposed solution, and a different approach should
be considered. Currently, we are accessing registers before the device
and power domain are fully powered up. This solution likely works
because the DMA is used to load firmware during the boot process, and
the necessary power domains are already powered up. Further
investigation and a more robust solution are recommended to ensure
proper initialization and power management.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This patch addresses several issues with the Intel ADSP HDA DMA driver:
1. Refactors the HDA DMA power management initialization. The previous
use of `pm_device_runtime_enable` was incorrect. The updated approach
relies on enabling runtime power management through the device tree
using the `zephyr,pm-device-runtime-auto` property. Additionally, the
patch removes redundant device initialization steps as these are already
handled by `pm_device_driver_init` when the device is under a power
domain.
2. Corrects the power domain assignment for the HDA link. The HDA link
was previously assigned to the io0 power domain based on a
misinterpretation of the documentation. The correct power domain
assignment is now based on updated documentation for LNL, ensuring that
the HDA link is associated with the appropriate power domain.
These changes ensure that the HDA DMA driver properly manages power
states, reducing power consumption and improving system stability, while
ensuring the correct power domains are used.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This patch addresses the following issues with the Intel HDA DAI driver:
1. Adds power management support for the HDA DAI driver by implementing
the `hda_pm_action` function and integrating it with the Zephyr power
management framework.
2. Ensures balanced calls to `pm_device_runtime_get` and
`pm_device_runtime_put` by modifying the `probe` and `remove`
functions to use these power management calls.
3. Ensures that the io0 power domain is active when the HD Audio is in
use by assigning the correct power domain to the HDA DAI devices in
the device tree files for various Intel ADSP platforms (ace15_mtpm,
ace20_lnl, ace30, ace30_ptl).
4. Enables runtime power management for the HDA DAI devices by adding
the `zephyr,pm-device-runtime-auto` property in the device tree.
These changes ensure that the HDA DAI driver properly manages power
states, reducing power consumption and improving system stability, while
ensuring the io0 power domain is active when required.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Enable WPS PIN expire timeout parameter, this helps us in cleanup of
the Authorized MAC IE in the beacon in case no peer is connected
within the timeout.
Without this parameter the IE is not removed from the beacon.
Signed-off-by: Gaofeng Zhang <gaofeng.zhang@nxp.com>
Moves the arch_swap() declaration out of kernel_arch_interface.h
and into the various architectures' kernel_arch_func.h. This
permits the arch_swap() to be inlined on ARM, but extern'd on
the other architectures that still implement arch_swap().
Inlining this function on ARM has shown at least a +5% performance
boost according to the thread_metric benchmark on the disco_l475_iot1
board.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Expands the caching documentation to include a high-level overview
of caching strategies and the features available in Zephyr.
Signed-off-by: Dane Wagner <dane.wagner@gmail.com>
Add device definitions in dt to test drivers that handle
multiple "compatible"s by a single driver.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Compilation will fail if multiple models are used at the same time.
Changing to define different unique names for the symbols
to avoid conflicts.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
The lsm6dso driver does not correctly reflect the status of
the node in dt. So the driver didn't compile even if
`st,lsm6dso32` node exists.
I fixed it to correctly go through ithe compile.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Merge the functions z_thread_stack_alloc_dyn() and
stack_alloc_dyn(), simplifying the flow for dynamic thread stack
allocation.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Modify the extended and periodic interval to be values that
are more suited for audio as they are multiple
of the expected resulting ISO interval.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This removes the deprecated CONFIG_NET_PKT_BUF_DATA_POOL_SIZE.
User should either use CONFIG_NET_PKT_BUF_RX_DATA_POOL_SIZE or
CONFIG_NET_PKT_BUF_TX_DATA_POOL_SIZE depending of net packet type.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Use CONFIG_NET_TCP_INIT_RETRANSMISSION_TIMEOUT and
CONFIG_NET_TCP_RETRY_COUNT to control the total timeout at the TCP
level.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add section which explains how to configure PuTTY to use RTT
shell there with all shell features. There is an alternative
approach which also works but it does not allow to use all
shell features.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
RTT backend can only be called from thread context and immediate
logging might lead to interrupt context use. Previously this limitation
was implied in different way and commit (c88a9ef27) got reverted.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Make sure that the socket service is properly unregistered when
dispatcher is unregistered.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add a separate test for public key validity. This needs to be done
synchronously so that we can respond with an early failure message to the
peer device.
Fixes#80218
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
If a shell command does not have a sub command, then the 3rd parameter
to SHELL_SUBCMD_ADD() macro should be set to NULL so that the help
will only print information specific to that command and not all
wifi commands.
Fixes#82633
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add a separate entry for HTTP related code so that we can have
separate maintainers/collaborators than general networking area.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
