Instead of disconnecting ISO channels on ACL,
we put them in a non-connected state, and wait for
the ISO disconnect events.
This ensure that the controller has free'd the
ISO channels when the iso disconnect callbacks
are received. It will thus be possible to e.g.
terminate the CIG on the ISO disconnect callback.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When an ISO channel is disconnect on the central, it is
not deallocated, but merely disconnected. This is because,
as per the HCI spec, the CIS handle lives on in the CIG.
Instead of unref'ing the bt_conn to 0, we simply put the
channel and connection in the disconnected state.
This also fixes a few missing returns for
terminating a CIG.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The disconnect handling of ACL connects in the sample was done
incorrect, and caused a call to bt_conn_unref with a NULL
pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There might be a sign extension when a long is promoted to
int_value_type and the former type is smaller than the later.
This produces the wrong output if the specified format is unsigned.
Let's avoid this problem by handling signed and unsigned cases
explicitly. When the type already matches int_value_type then the
compiler is smart enough to recognize the redundancy and removes
unneeded duplications automatically, meaning that the code will stay
small when code size matters.
A similar issue also existed in the restricted %llu case.
The fix is the same as above.
Those fixes exposed wrong results in the printk.c test with %llx
so fix that as well.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Function parameters can be checked without MQTT instance lock being
held. Additionally if NULL parameter would be passed (which this check
tries to handle), then function would return without releasing lock.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Sending of > 2k buffers leads to split socket writes.
Current implementation is not checking for full buffer size.
ztls_sendmsg_ctx proceeds to next iov on sucessful write.
Solution: Add loop into ztls_sendmsg_ctx to process whole buffer
before proceeding to next iov.
Signed-off-by: Pavlo Hamov <pasha.gamov@gmail.com>
Apply a similar fix for cavs_v20 as was done for other cavs platforms in
commit ee7773fb46 ("soc: intel_adsp: fix linker script for XCC").
Without this fix, cavs_v20 build with fail with 0.13.0 Zephyr SDK.
Fixes: 74cc8bee7c ("xtensa: cavs_v20: use uncached addresses to support SMP")
BugLink: https://github.com/thesofproject/sof/issues/4703
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
enable spi driver to support dspi edma
add support for shared dma mux spi port
for shared spi port we need judge the irq source
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
The additional depends on SOC_FAMILY_SAM was redundant.
Add sam4l_ek to dfu sample exclude since it was failing on
arduino_due.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
For the Xtensa platforms (e.g. qemu_xtensa), the first `malloc` call
may fail if the newlib heap base address is such that the first `sbrk`
call returns a 4096-byte aligned address.
Here we add a workaround for Xtensa that allocates and immediately
frees a 16-byte memory block during initialisation so that all
subsequent `malloc` calls succeed.
This commit needs to be reverted once the issue #38258 is fixed.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The #36758 fixes coap_packet_get_payload function by normalizing
offset value in the library. That change create a regression on
UpdateHub. However, the UpdateHub can now use coap_packet_get_payload
function instead manually compute payload start and payload size.
This refactors the current code in favor of coap_packet_get_payload
and fixes the regression.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The user tracing backend allows one to implement weak symbols to perform
user specific tracing, e.g gpio toggling or spi transactions. This adds
a qemu sample that just does a simple printk for each of the traced
functions, but could be changed to do whatever function the user
desires.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Create a new tracing option TRACING_USER that allows
the user to define certain user_sys_trace_... functions
to perform whatever work desired for tracing when
tasks are swiched in/out, during isr enter/exit, and when
cpu is idle.
This infrastructure can be useful for plugging into
locally defined tracing tools or any user-specific
debugging environment.
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
IRQ_CONNECT macro last argument is architecture-specific flag,
but now there is instance id at this place.
This PR set architecture-specific flag to 0.
Signed-off-by: Grixa Yrev <GrixaYrev@yandex.ru>
Atmel sam0 adc peripheral have multiple interrupt vectors for same5x
devices. This configure interrupt vector by name to ensure that proper
interrupt handle will be executed.
Fixes#37779
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add a sent callback to bt_iso_chan_ops so that the application
can be notified when an SDU has been sent. This can help the
application decide whether to queue up multiple, or only
have a single ISO PDU enqueue for reduced latency.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The Kconfig refactor that replaces some single-symbol 'if's with
'depends on' added a second entry. That entry allows flash driver
be selected for SoC's without support. This fixes the 'depends on'
entry to allows only SAME/V SoCs.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit removes the `timeout_q` from the `struct z_kernel` since it
is no longer used.
Note that the new kernel timeout implementation introduced in the
commit 987c0e5fc1 uses `timeout_list`
global variable in place of it.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
__cxa_atexit implementation provided by MWDT startup code calls
malloc which isn't supported right now. As we don't support
calling static destructors in Zephyr let's provide our own
__cxa_atexit stub and get rid of MWDT startup libs
entirely.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Default weak _exit implementation from ARC MWDT libs
calls _exit_halt from startup libs. As we are going to
get rid of startup libs usage let's implement _exit
stub.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This script allows us to programmatically query bug-bashers within
a user-supplied time-window.
For example, we held a "Bug Bash Week" August 1-7, 2021 (it was
announced a week early though). The output of the script prints
the "top ten" bug bashers in tab-separated columns in descending
order. The first column is the number of bugs squashed and the
second column is the github user id.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
When we build tests/kernel/common/kernel.common.misra on
bl654_usb we get the following error:
subsys/usb/usb_descriptor.c:313:2: error: ISO C90 forbids array
'hwid' whose size cannot be evaluated [-Werror=vla]
Fix by removing use of usblen variable in array.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The code was wrongly calling DMA_Abort on a channel
that not initialized. This fixes Issue#38078
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Compatible "soc-nv-flash" was removed as part as #38077,
while it should have been kept, similarly to what was done
on other SoCs.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On native_posix_64 we get the following compile error in CI:
error: format %u expects argument of type unsigned int
Fix by using %zu instead of %u as type is of size_t.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
PR #37938 aligns many linker symbols name like rom/rodata_regions ...,
but ae350 soc linker script doesn't update for that. Migrate all linker
symbols name to PR #37938 changes.
Signed-off-by: Jim Shu <cwshu@andestech.com>
The HCI spec defines the BIS index range as starting from
index 0x01. We had previously implemented it such that it
starts from 0x00, and then simply adding 1 to the index
when sending over HCI. However, this may cause issue with
other HCI, or other SIG defined specification, commands
and events, and thus it is probably simpler if we just
use the HCI defined range.
This commit disallows BIT(0) (representing the BIS
index 0x00) to be set, and removes the addition
of 1 when sending over HCI.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Position over LTE (PoLTE) can be used to locate a device as
an alternative to GNSS.
Increase RX thread stack size for PoLTE processing.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
