Ignore unit tests and EFI binaries when calculating footprints with
--show-footprint, or we will get a build error.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adding a bit-mask to the 'extra' data structure allowing passing info
re. active CIS's to the ull_conn_iso_done handling. Per CIS storing
an expiration time counter, monitoring in done handling. Adding
establishment timeout monitor in CIS Create procedure, completing
and ntf'ing accordingly.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
If a CIS is in teardown state, the data in structure should not be
trusted, so skip passing data to ISOAL
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Instead of storing the calculated reload value (in conn intervals) in
the conn object, now store the timeout value, and perform calculation
when used. This allows using the timeout value across all CIS's without
having to re-calc and store on change of TO
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
This allows putting the UART backend on a serial device that has to be
quiet unless logging is explicitly enabled at runtime.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
log_backend_activate() does not assign the backend id (backend->ctx->id),
which is required for runtime filtering.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Added a new Kconfig option for the Bluetooth Host to allow
unauthenticated pairing attempts made by the peer where an
unauthenticated bond already exists on other local identity.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Enable Zephyr device runtime power management mechanisms in Intel DMIC
driver. This allows Zephyr to track usage reference for power domain
gating.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This patch contains several small changes to the intel adsp power
domain.
- include missing header,
- replacing sys_write32/sys_read32 with sys_write16/sys_read16 since
DfPWRCTL is a 16 bit register,
- renaming struct to be more representing what it is,
- passing register address, not a value to the sys_read/sys_write
functions,
- pd_intel_adsp_init is now returning actual status.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Add a simple one-liner that checks for "0" in the count of merge
commits. If a merge commit is present the output will be "1"
or higher, failing the job.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
While diagnosing a problem on the STM32U585 in this function in
flash_stm32l5_u5.c, I had difficulty sussing out the flow of the
function and conditional logic.
This refactor seeks to improve clarity through a simplified flow control
using an early return to short circuit logic on subsequent calls to the
function and slightly more thorough comments.
Tested using tests/drivers/flash on the b_u585i_iot02a and in a
proprietary application and board which uses the STM32U585 and littlefs.
Signed-off-by: Peter Maxwell Warasila <madmaxwell@soundcomesout.com>
In flash_stm32_page_layout, the FLASH_PAGE_NB macro is used to set the
page count in the flash layout returned to the caller. On STM32L5
platforms this is defined in stm32l5xx_hal_flash.h to be (FLASH_SIZE /
FLASH_PAGE_SIZE). However, on STM32U5 platforms the macro is defined in
the soc headers (such as stm32u585xx.h) define the macro as
(FLASH_BANK_SIZE / FLASH_PAGE_SIZE). This results in the flash layout
only reflecting the first bank on STM32U5 platforms with the maximum 2
MB of flash.
This commit resolves this discrepancy by directly calculating the number
of pages by dividing FLASH_SIZE by FLASH_PAGE_SIZE.
Tested on a proprietary board using the STM32U585 which mounts a
littlefs partition in the last 256 kB of its 2 MB of flash.
Signed-off-by: Peter Maxwell Warasila <madmaxwell@soundcomesout.com>
Adds support for building the external_lib sample application on a
windows host operating system.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The test was broken by changes made in
9d175ca5f1 (device ready check was
commented before). Also removed redundant preconditions check, since it
is already done in the test.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Drop the async enable function. This feature is rarely/never used,
complicates driver design, and doesn't really follow the sync/async API
design/naming used in other areas. In the future we can introduce
regulator_enable_async if needed, with support from the driver class (no
onoff). Note that drivers like PCA9420 did not implement any
asynchronous behavior. regulator-fixed implemented in the past
asynchronous behavior using work queues, an overkill for most GPIO
driven regulators. Let's keep things simple for now and extend the API
when needed, based on specific usecases.
In the current implementation, reference counting is managed by the
driver class. \isr-ok attribute is dropped, since calls are potentially
blocking. Note that drivers like PCA9420 already violated such rule.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove regulator-fixed-sync specialization, create a single driver that
is always synchronous. The asynchronous part is rarely/never used, so
let's keep things simple for now.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove conditionnal declaration of `bt_tbs_dbg_print_calls` in
`subsys/bluetooth/audio/tbs.h` so the function still exist even if the
debug is not enabled.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Update the Bluetooth specific Kconfig legacy log template to use the new
log inheriting template.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add a new Kconfig template that allow log modules to inherit their log
level from their parent module.
For example, the logs used in the Bluetooth audio like
`BT_AUDIO_STREAM_LOG_LEVEL` can inherit their level from
`BT_AUDIO_LOG_LEVEL`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The --snr (nrfjprog) --id (jlink) and --board-id (pyocd) options were
deprecated a long time ago in favor of --dev-id. It is time to remove
them.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When MCUBoot is enabled, IRAM region needs to be set
to a smaller value to avoid overlapping. This shall be re-worked
when MCUboot build for ESP32 is performed in Zephyr environment.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Do not set wifi optimizations by default in order
to free up IRAM room region. In case higher throutput
is necessary, one can enable this flags to optmize it.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Missing decode of conn_event_count on CIS_IND
Peripheral Suggest update to conn_event_count in case of a delayed
CIS_IND, allowing CIS peripheral more time to setup
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The Bluetooth spec states that a K-frame exceeding the device's MPS
should trigger a disconnection of the channel.
Fixes two PTS tests that verify this behavior:
L2CAP/LE/CFC/BV-27-C
L2CAP/ECFC/BV-34-C
The current behavior is a silent truncation, which is not very nice for
the user, even if the spec would allow it.
Fixes#52228 and #51174.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add mayfly locking around the access to the local pending procedure list
as it is accessed by both thread and mayfly.
Fixes#45427
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
When generating notification for Sleep clock accuracy, check for
success on rx_node allocation was left out. This is added.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Unit test project for bt_keys_find_addr().
This part of subsys/bluetooth/host/keys.c unit testing.
Signed-off-by: Ahmed Moheb <ahmed.moheb@nordicsemi.no>
Enable counter_basic_api test for s32z270dc2_r52 boards, using
System Timer counter instances with different prescaler values.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Enable counter alarm sample on s32z270dc2_r52 boards, using the first
System Timer Module instance.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Enable RTU System Timer Module (STM) instances on
s32z270dc2_r52 boards. Module clock frequency is fixed to
133.333333 MHz.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
NXP S32 System Timer module includes a 32-bit count-up timer and four
32-bit compare channels with a separate interrupt source for each
channel. The timer is driven by the module clock divided by an 8-bit
prescale value.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Add a hidden Kconfig option to select the index of the target RTU
(Real-Time Unit) subsystem. This index can be used by peripheral
drivers, for example, to know the peripheral instance index since the
HAL is index-based.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Microchip XEC GPIO pins support inverting the output of
alternate pin functions. This feature may be useful for
those peripherals that do not implement output inversion
in the peripheral. GPIO control register pad input and
parallel input register values are not affected by the
function output invert feature. GPIO interrupt detection
of an output is inverted if the invert polarity is enabled.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Added a missing SDK function POWER_PowerInit
to the clock_init function of the soc in lpc55S36.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
When configuring an LPSPI module for a new device with different baud rate,
the module needs to be disabled for the baud rate change to take effect.
This adds the necessary call to LPSPI_Enable before initializing the
module.
Fixes#51177
Signed-off-by: Jonas Otto <jonas@jonasotto.com>
This casts the char * buffers to void * before giving them to the
LOG_DBG function to fix a warning at runtime.
Signed-off-by: Gaël PORTAY <gael.portay@gmail.com>
