Mark the POSIX_SINGLE_PROCESS Option Group as supported
in PSE51, PSE52, and PSE53 Application Environment
Profiles.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Add a test for confstr(), which is required by the
POSIX_SINGLE_PROCESS Option Group, as per IEEE
1003.1-2017.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Support querying POSIX string configuration values (similar to
sysconf()).
confstr() is required by the POSIX_SINGLE_PROCESS Option
Group as detailed in Section E.1 of IEEE-1003.1-2017 and has
been part of the specification since POSIX-2.
The POSIX_SINGLE_PROCESS Option Group is required for PSE51,
PSE52, PSE53, and PSE54 conformance, and is otherwise mandatory
for any POSIX conforming system as per Section A.2.1.3 of
IEEE-1003-1.2017.
With this, we have complete support for the POSIX_SINGLE_PROCESS
Option Group.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
"RW pinctrl" is clearly SOC specific naming for an IP
that is not necessarily constrained to live on one SOC series.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
lld will produce warnings for the symtab, strtab, and shstrtab sections
if --orphan-handling=warn is specified and there are no matching rules
in the linker script for these sections. Handle these sections when
building with lld to prevent the warnings.
Signed-off-by: Jonathon Penix <jpenix@quicinc.com>
The `_POSIX_CPUTIME` interface requires
`CLOCK_PROCESS_CPUTIME_ID` and `clock_getcpuclockid()` to be
present. Both of those are now available and therefore we can
mark `_POSIX_CPUTIME` as supported for PSE53.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Previously, XSI_THREADS_EXT included a note about
undefined behaviour. However, the required functions
pthread_attr_getstack(), pthread_attr_setstack(),
pthread_getconcurrency(), and pthread_setconcurrency()
are all conformant.
Remove the unneeded note.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Removes instances of setting CONFIG_BOARD that should have been
removed in the hwmv2 porting process
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Replaces inaccurate or wrong vendor prefixes in board and soc
folder names with those from thr vendor prefix file
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds the user-provided board qualifiers to Kconfig so it can be
used by application code, along with one containing the full string
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Configures and initializes the EN GPIO to inactive prior
to calling the soft reset sequence during probe. The EN
pin may have been left asserted by the hardware on some systems.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
- spill windows in the current context (before switching task) since
it will be erased.
- Remove unnucessary load/mov
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
After https://github.com/zephyrproject-rtos/zephyr/pull/70438
got merged simultaneously with
https://github.com/zephyrproject-rtos/zephyr/pull/70564
all these tests stopped building properly due to the
change of avaliable variables in Kconfig & cmake.
Let's fix them.
As a bonus, as for kconfig the BOARD_TARGET_STRING is the
same for the hwmv1 backwards compatible name, let's
just remove the check for the old names.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Debugging IPv6 Neighbor Discovery issues requires to enable full IPv6
logs, which can get bloated given it provides logs for every single
packet. We should be able to focus on IPv6 ND logs only, hence introduce
a separate log module for IPv6 ND.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Recently (during Bluetooth UPF), a lot of developers experience
confusion due to weird errors in SMP, etc, which are actually irrelevant
and caused by the connection never having existed.
As a stop-gap measure, until upper layers properly report lower layer
failures, add a warning in the logs to stop wasting developer time.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Followup: #69905
Adopting new board terminology for CMake, python, and Kconfig code to
use qualifiers instead of identifiers.
Also adjusted to board target where applicable.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Move the Kconfig symbols SOC_ESP32_PROCPU, SOC_ESP32_APPCPU,
SOC_ESP32S3_PROCPU, and SOC_ESP32S3_APPCPU.
The CPU cluster is defined in espessifc/soc.yml and should therefore
be available in the HWMv2 Kconfig.soc tree.
This will allow sysbuild to test for the CPU cluster when targeting
remote board for a build.
Update espressif boards accordingly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Since the cap_common.c rely on CONFIG_BT_MAX_CONN, and is
only used for connected procedures, it should be guarded
by CONFIG_BT_CAP_INITIATOR_UNICAST instead of
CONFIG_BT_CAP_INITIATOR
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The PBP bsim tests had several issues that was not uncovered
until the PA sync timeout was increased. This commit fixes these,
as well as increase some timeout values due to recently
increased PA sync timeout.
Among the issues were lack of support for the alternating PBA
features, missing reset of values and specific time sleeps.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Increase the timeouts to be 60 instead of 6.
The reason for this is that some controllers (like the Zephyr
controller) will reserve some of these to ensure stability,
and in fact with skip = 5 and retry = 6, it would still
send the PA reports at every interval.
To accomodate a higher timeout value, the functions used to
convert PA intervals to PA timeouts have been updated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There were missing global dppic and ipct channels configuration
that allows to deliver events from global peripherlas like GRTC
to Radio domain.
Add missing configuration to nrf54h20 dtsi file.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The GRTC channels and irqs configuration for Radio domain
is SOC specific not board specific. Move the configuration
to SOC dtsi file.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Replace the uses of the hwmv1 names in the board documentation
with the corresponding hwmv2 ones.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace all instances of
nrf5340bsim_nrf5340_cpunet & nrf5340bsim_nrf5340_cpuapp
with
nrf5340bsim/nrf5340/cpunet & nrf5340bsim/nrf5340/cpuapp
In these samples/tests twister yamls definitions.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove the hwmv1 twister board definitions for the
nrf5340_bsim targets in preparation to
transition to the new definitions for hwmv2
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace the uses of the hwmv1 names in the samples documentation
with the corresponding hwmv2 ones.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For all samples which handle the nrf5340bsim in some special way
(for example in sysbuild files, or by checking what samples are
supported) handle also building with the hwmv2 names.
Also, let's fix the cmake info message in these respective
samples which tells the user which board target is used for which
part of the app.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Interrupts should not be enabled this early in boot time.
Driver initializations expect IRQs not to arrive when
setting up HW.
Remove enabling `MSTATUS.MIE` in `__start`.
It will be enabled when main thread is switched to,
as threads by default start with enabled `MSTATUS.MIE`.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
