Add a new SPI shim driver for Intel SoCs. Builds upon the SEDI bare
metal SPI driver in the hal-intel module.
Co-Authored-By: Kong Li <li.kong@intel.com>
Signed-off-by: Ye Weize <weize.ye@intel.com>
The receive FIFO needs to be drained in a different way depending when it
is done.
- before start
If the RX FIFO is in overflow state then we must read all the entries out
to empty it (it was after all full).
- before stop
The DMA might be already running to read out data. Check the FIFO level
change in one sample time which gives us the needed information to decide
to wait for another loop for the DMA burst to finish, wait for the DMA to
start it's burst (DMA request was asserted) or drain the FIFO directly.
No need to drain the RX fifo at probe time.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Creates a generic sample application that executes a simple charging
task loop capable of completing a basic charge cycle.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Adds a devicetree for describing common battery characteristics used
by multiple devices and subsystems.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Adds a new runtime property called CHARGER_PROP_CONSTANT_CHARGE_VOLTAGE
to the charger API. This can be used to get/set the charger
constant voltage regulation target.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Adds a new runtime property called CHARGER_PROP_CHARGE_TERM_CURRENT
to the charger API. This can be used to get/set the charger
termination current target.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Adds a new runtime property called CHARGER_PROP_PRECHARGE_CURRENT
to the charger API. This can be used to get/set the charger
conditioning current sink target.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Adds a new runtime property called CHARGER_PROP_CONSTANT_CHARGE_CURRENT
to the charger API. This can be used to get/set the charger constant
current sink target.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Adds a new runtime property called CHARGER_PROP_HEALTH to
the charger API. This can be used to get the charger health
condition.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Adds a new runtime property called CHARGER_PROP_CHARGE_TYPE to
the charger API. This can be used to get/set the charging scheme
used to charge the battery pack.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Change the creation of version.h and app_version.h to apply the
KERNEL_VERSION_CUSTOMIZATION APP_VERSION_CUSTOMIZATION values as target
properties instead of CMake variables.
This allows more freedom for users / Zephyr modules to adjust the value
of KERNEL_VERSION_CUSTOMIZATION and APP_VERSION_CUSTOMIZATION values and
thereby make use of the functionality introduced with #61635.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This is to increase probability of reception of responses (Config Status
messages) from the node when the provisioner sends a Set message and the
node response with a Status message at the same time so that the message
collide.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Since the default process dhkey gen in bt rx, will block send
Trans Ack, cause peer device send more package.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Since notice that simultaneous advertising is not only used
by relay message, provision over pb-adv can also be used.
so it was changed to a more general name.
refs:https://github.com/zephyrproject-rtos/zephyr/pull/48903
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
This will truncate ATT notifications/indications if exceed ATT MTU size.
It is up to the client to exchange MTU.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes sending proper Preset List notifications after
reconnection. The issue was observed when the last preset
known to the client has been removed.
As we do not hold the information about the deleted presets,
we need to use Generic Update procedure to:
1. Notify the presets that have been removed in range
(PrevIndex = current_preset_last, Index=previous_preset_last)
2. Notify deletion of preset Index=previous_preset_last.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Some of the data shall be persistent across connections to bonded
clients. This includes notidication state flags that are used to
determine whether notify bonded client after reconnection.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This refactors the preset list to use sys_slist API. There have been
various issues seen while iterating presets, thus it's more save to use
well-defined and tested sys_slist API.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Defer sending the features, active index, preset list and preset read
response to sysworkq and retry sending in case failed due to buffers not
available at the moment.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Verify that a HAS Server IUT sends changed characteristic notifications
or indications when the Lower Tester reconnects.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This moves common code to set_preset_availability function to be called
from bt_has_preset_available and bt_has_preset_unavailable.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes missing setting of FLAG_CONTROL_POINT_NOTIFY flag that
indicate whether submit control_point_work. In case the there are more
indications/notifications to sent (is_last flag is unset), the
FLAG_CONTROL_POINT_NOTIFY shall be set to resubmit control_point_work.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This removes revering the features value back to previous state if work
submission failes. Even if it fails it indicates an internal sysworkq
issue, so even retry won't help. The client can read the features value
anyway, thus it's sane to just log an error in such case.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Update interface of memc flexspi driver to better handle multiple
devices. Previously, using multiple devices on one FlexSPI bus would
require the user to configure each device to install its command table
(referred to as a LUT table by the driver) at an offset, so that it did
not overlap with other devices on the bus.
This commit changes the interface of the memc flexspi driver to instead
configure the LUT and flash device in one call. This allows the memc
driver to record the port each LUT sequence is used with, so that
future FlexSPI transfer requests can have their LUT offsets adjusted
based on the target port (which will correspond to a target device)
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Check XIP state based on the value of CONFIG_FLASH_BASE_ADDRESS. This
check should be more reliable than the SOC based method currently
used.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
MEC172X series SoCs share most IP but the -LJ series expands the PWM and
ADC channels available as well as defines extra pinctrl pins.
Separating these better to be able to simplify their inclusion and
driver code. Any board based on either the -SZ or -LJ package can just
include the mec172x<sz/lj> dtsi files for their specific package.
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
add support for the sigev_thread flag in zephyr timer posix api following
the behaviour described in the linux man page. with this enhancement,
a single thread is created to receive all notifications from timers
Signed-off-by: Arunmani Alagarsamy <arunmani@linumiz.com>
This commit adds board files for the da14695_dk_usb.
The board features two Mikrobus sockets, these are added to the dts
Signed-off-by: Niek Ilmer <niek.ilmer.aj@renesas.com>
This commits adds the DA14695 variant.
The main difference with the DA14699 is a smaller package with less
GPIO.
Signed-off-by: Niek Ilmer <niek.ilmer.aj@renesas.com>
Add the following XPRO boards to flash driver test:
SAMD20, SAMDE54 and SAMR21
Signed-off-by: Daniel Evans <photonthunder@gmail.com>
Co-authored-by: Gerson Fernando Budke nandojve@gmail.com
