Refactor the ESP32 target SOCs together with
all related boards. Most braking changes includes:
- changing the CONFIG_SOC_ESP32* to refer to
the actual soc line (esp32,esp32s2,esp32s3,esp32c3)
- replacing CONFIG_SOC with the CONFIG_SOC_SERIES
- creating CONFIG_SOC_FAMILY_ESP32 to embrace all
the ESP32 across all used architectures
- introducing CONFIG_SOC_PART_NUMBER_* to
provide a SOC model config
- introducing the 'common' folder to hide all
commonly used configs and files.
- updating west.yml to reflect previous changes in hal
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Ethernet MAC addresses are not unique enough
use unique_device_ID full range (96 bits)
call crc32_ieee() to generate last 3 bytes of mac address
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
When ENET_ENHANCEDBUFFERDESCRIPTOR_MODE enabled,
MAC will automatic capture receive nanosecond from 1588TMR
and return back to ENET_ReadFrame. It is a highest accuracy
recv timestamp_ns, we do not need manually read from 1588TMR.
By this change, receive timestamp accuracy increase
from 20us to 200ns above.
Signed-off-by: Chen Caidy <chen@caidy.cc>
Add the RCR_PRMS field to toggle the promiscuous mode in the Ethernet
controller.
Register a set_config function that can make use of the field when
CONFIG_NET_PROMISCUOUS_MODE is enabled.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Quite a few of the drivers meant for the POSIX arch
interacted with the host directly, and will not
work when we use an embedded libC.
Until we fix them, let's add the appropriate
kconfig dependencies to avoid users trying to build them.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Adds PHY driver. Works via MDIO API and
exposed ADIN2111 MDIO Clause 45
functions.
Link status detection is triggered by
ADIN2111 driver within offloaded IRQ
handler.
Supports:
- LED0, LED1 enable/disable
- Fatal HW error detection
- AN 2.4V tx mode enable/disable
The initialization order is important.
PHY 2 must be initialized after PHY1.
Therefore, it shall be defined after the 1st one
in the devicetree.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
Adds initial ADIN2111 2-Port 10BASE-T1L (SPE)
switch support. Works over SPI.
The driver creates 2 interfaces, 1 per port (PHY).
Configures multicast and broadcast filters.
The same unicast is applied to both ports.
Supports:
- Link state detection
- CRC enable/disable
- Ports config set
- Ports ETH stats
Provides functions for MDIO driver.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
Make it possible to be able to change speed and duplex for the
STM32H7xx and API_V2 from the configuration settings.
This exists for the non-STM32H7x already today, so this is basically
copying the code for the other STM32's.
Please note that ST has a series incompability. For F1 and F2,
the duplex settings are named ETH_MODE_FULLDUPLEX respective
ETH_MODE_HALFDUPLEX. For F4, H7 and F7 the duplex settings are named
ETH_FULLDUPLEX_MODE respective ETG_HALFDUPLEX_MODE.
This should really be queried from the PHY (as previous programmer have
written in the code). But while waiting for a proper PHY solution,
this is intended as a stop-gap solution.
Signed-off-by: Stefan Petersen <spe@ciellt.se>
Without this change, there's a difference between what the V2 Ethernet
HAL claims to be its capabilities in eth_stm32_hal_get_capabilities()
and what is actually enabled when CONFIG_ETH_STM32_HW_CHECKSUM is
disabled. This difference somehow causes the checksum in outgoing
packets to become 0, and hence seems to break networking at least on
some PHYs.
This commit disables HW checksums by default even when V2 driver is in
use, and this hence fixes networking when CONFIG_ETH_STM32_HW_CHECKSUM
is disabled.
This fixes#57629.
Signed-off-by: Ole Morten Haaland <omh@icsys.no>
This patch enables the PLL clock output and PLL ref clock
for second ethernet module in NXP's i.MxRT106x SoCs
Signed-off-by: Sumit Batra <sumit.batra@nxp.com>
Fix a compilation error for the ethernet driver smsc91x that
prevents the build with asserts enabled.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
rx_thread() is started by eth_initialize(), while dev_data->iface is
populated by eth_iface_init() (called by net_init()).
Usually eth_iface_init() has completed by the time rx_thread() hits its
idle timeout and accesses dev_data->iface, but in case of a time-intensive
SYS_INIT item between eth_initialize() and net_init(), this is not
necessarily the case, causing a NULL dereference. This can be forced by
putting a k_sleep(K_SECONDS(5)) at the top of eth_iface_init().
Start rx_thread() in eth_iface_init() instead (which runs after
eth_initialize() due to init priorities) to make sure everything is
initialized properly.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Allows Ethernet communication between "cells"
in the Jailhouse hypervisor.
The vring queue deviates from a standard virtqueue
so is implemented separately.
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
In the case that there is a situation where the controller
oscillator start-up timer doesn't expire, or the SPI can't
read the CLKRDY bit the driver would hang during init.
The config option ETH_ENC28J60_CLKRDY_INIT_WAIT_MS sets
the time that the driver will wait for OST before returning
an ETIMEDOUT error.
Signed-off-by: Dean Sellers <dsellers@evos.com.au>
Allow defining multiple instances of enc28j60.
Remove the ETH_ENC28J60_0 Kconfig option along with this.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Add the `full-duplex` property for the `microchip,enc28j60` node.
Replace ETH_ENC28J60_0_FULL_DUPLEX Kconfig option with this property.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
When running cppcheck on eth_stm32_hal.c it generated a warning for
shiftTooManyBitsSigned.
The solution is to make sure that the numeric value shifted is unsigned.
Updated to use BIT() macro as suggested by GeorgeGCV.
Fixes: #57336
Signed-off-by: Stefan Petersen <spe@ciellt.se>
Some single-precision float constants were being compared against
double-precision floats. Make the constants doubles.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
According to the datasheet for Marvell PHY [1], the mode field of the
General Control Register 1 Page 18 occupies bits [2:0]. However, the macro
PHY_MRVL_MODE_CONFIG_MASK specifies the mask as 0x3, which would
correspond only to [1:0]. The code in phy_xlnx_gem_marvell_alaska_cfg()
uses the mask to set the mode field to 0 to set "RGMII (System mode) to
Copper" mode. Unfortunately, different chips have different reset values
(111 or 000) and in first case, the code would set the field to 100,
instead of 000.
Without this change, ethernet on Avnet MicroZed (Marvel Alaska 88E1512 PHY)
does not work.
Signed-off-by: Marek Vedral <vedrama5@fel.cvut.cz>
[1]: https://www.marvell.com/content/dam/marvell/en/public-collateral/phys-transceivers/marvell-ethernet-phys-alaska-88e151x-datasheet.pdf
The SAM GMAC driver is not able to use all of the receive buffers
concurrently. Frames larger than (buffer size) * (buffer count - 1) are
silently dropped. Fix it by adding one to MAIN_QUEUE_RX_DESC_COUNT.
Fixes#55701
Signed-off-by: Brandon Del Bel <delbel@umn.edu>
Set STM32CubeHAL ethernet version in use as V2 by default, on series
supporting it (H7, F7, F4). Not yet available on F2 series.
Add a choice symbol to explicit V1 version as deprecated.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The SAM GMAC driver is not utilizing the entire receive buffer, causing
large packets to be dropped. Fix it by setting Receiver Packet Buffer
Memory Size Select to Full (RXBMS = 3) in the GMAC_DCFGR register.
Fixes#55701
Signed-off-by: Brandon Del Bel <delbel@umn.edu>
HAL API changes in ethernet and pwm
SoC RT595 power management code change
west.yml update
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Remove all init functions that do nothing, and provide a `NULL` to
*DEVICE*DEFINE* macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a dependency on CONFIG_NET_L2_ETHERNET for
CONFIG_ETH_INIT_PRIORITY. This hides the Ethernet driver initialization
priority option in menuconfig unless CONFIG_NET_L2_ETHERNET is selected.
CONFIG_ETH_INIT_PRIORITY cannot currently be moved inside the
CONFIG_ETH_DRIVER if-statement in Kconfig as it is used outside the
Ethernet driver source files.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The sleep after carrier activation was badly ported so the time
was 1000 ms instead of 1 ms.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@gmail.com>
When the phy_event state diagram ends up in the
eth_mcux_phy_state_read_status case, the eth carrier
is enabled. However, this step only happens when an
interface is available in the context.
Regardless of the state of the iface, the state machine
will switch to eth_mcux_phy_state_read_duplex in the next
iteration. Thus, the states diagram never returns to the
previous state. As a result, the eth carrier will never
be enabled in the future.
This problem is fixed by setting the wait state if the
iface is not available.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@gmail.com>
Arm fvp_baser_aemv8r and fvp_base_revc_2xaemv8a boards are using
SMSC91C111 as their ethernet adapters.
Portions of the codes are based on FreeBSD code from its
'src/sys/dev/smc/if_smc.c' and 'src/sys/dev/smc/if_smcreg.h'.
This driver has two parts, one is the ethernet controller driver, which
is MAC layer driver. The other is the MDIO driver, which is the PHY
layer driver. Both of them are in the same source file due to that they
need to share the same reading and writing register functions and
the smsc object.
The mdio driver is needed by the existing 'phy_mii' driver, which is
a driver for the generic MII-compliant PHY.
This driver was developed under the fvp_base_revc_2xaemv8a target and
has been tested on the fvp_baser_aemv8r target.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
There is no need to use *_cmp_raw() functions here, all they do is cast the
pointers to in(6)_addr* and call the non-raw functions. Additionally, this
fixes a warning for the net_ipv6_addr_cmp_raw() call, which didn't cast the
arguments correctly.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Unify the drivers/*/Kconfig menuconfig title strings to the format
"<class> [(acronym)] [bus] drivers".
Including both the full name of the driver class and an acronym makes
menuconfig more user friendly as some of the acronyms are less well-known
than others. It also improves Kconfig search, both via menuconfig and via
the generated Kconfig documentation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Devicetree local-mac-address and zephyr,random-mac-address support added.
Updated w5500_set_config() to support ETHERNET_CONFIG_TYPE_MAC_ADDRESS
and change the MAC address at runtime.
Signed-off-by: Rainer Paat <rapaat@gmail.com>
This fixes a regression introduced in:
16a0e314ea drivers: net: Move Ethernet device definition for SLIP to
ethernet
Where the module would fail to build with:
log_core.h:153:20: error: '__log_level' undeclared (first use in this
function)
Registering a module fixes the build.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Currently, if CONFIG_SLIP_TAP is enabled (default for QEMU), and no
other Ethernet driver is enabled, the following warning is printed by
CMake:
No SOURCES given to Zephyr library: drivers__ethernet
This happens because SLIP_TAP enabled Ethernet L2, but has no actual
sources in drivers/ethernet. This commit fixes this, by moving the
actual definition of the SLIP TAP Ethernet interface into a separate
file, within drivers/ethernet. Technically, in that configuration SLIP
defines a Ethernet device, implementing Ethernet API, so such a change
is justifiable, and prevents unwanted warning from being generated.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
PR #30403 implemented nocache regions for ethernet DMA buffers in sram3 to
fix issue #29915. Unfortunately, some STM32H7 variants do not have any
sram3 so they still suffer from #29915.
All H7 variants have sram2 though, so use that for targets without sram3.
Signed-off-by: Björn Stenberg <bjorn@haxx.se>
ETH MAC config for STM32H7X and STM32_HAL_API_V2
too late and fails #54409
call HAL_ETH_SetMACConfig before HAL_ETH_Start_IT()
check the return of HAL_ETH_SetMACConfig()
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
With CONFIG_ETH_STM32_MULTICAST_FILTER=n, MACFFR was being set to 0 instead
of ETH_MULTICASTFRAMESFILTER_NONE, blocking all multicast traffic.
Instead, reset all the relevant bits first, then set either
ETH_MULTICASTFRAMESFILTER_HASHTABLE or ETH_MULTICASTFRAMESFILTER_NONE
depending on Kconfig.
This issue was introduced in #53850, `git diff a5f9fc2~2 a5f9fc2` (the
total diff of that PR) shows what happened - the
`tmp |= ETH_MULTICASTFRAMESFILTER_NONE;` line was removed completely
instead of being gated by `!defined(CONFIG_ETH_STM32_MULTICAST_FILTER)`.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
The change enables the ethernet driver to save statistics in a
structure in the ethernet driver API structure. In addition, the
change also attempts to update error statistics based on errors
reported in the STM32 ethernet HAL API.
Fixes#53995
Signed-off-by: Chamira Perera <chamira.perera@audinate.com>
bugfix for Cyclone V Ethernet Phy error and timeout overflow.
- p->instance was incorrectly assumed to be a reference to
the emac device, this is ammended
- the volatile uint16_t timeout would often overflow
- code cleanup and added more macros for housekeeping
Signed-off-by: Benjamin Kyd <benjamin.kyd@intel.com>
