The Kconfig defaults should be in Kconfig.defconfig.
MFD should not be made dependent on the LP flexcomm being
enabled, since MFD can be for other things than just flexcomm.
Change from depends on to an if.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Doesn't seem like there is any reason to be changing the
serial and ADC driver init priorities in the SOC defconfigs.
By default, clock control has priority 30, dma has priority 40,
and serial/adc have priority 50. This seems already to be the order
that is needed, and the original goal of these overrides, which
don't seem necessary anymore.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
There are some SOCs which use the same pinctrl
device, but are not really overall that similar to the kinetis
family of SOCs, so prepare to reuse this code by other SOC families.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Moving RT118x kconfigs to series level instead of family level,
and cleaning up redundant declarations, and adding missing
HAS_MCUX_FLEXSPI selection.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Introduced `GPIO_DEVICE_INIT_RA_IF_OKAY` which utilizes `COND_CODE_1`
to reduce the chain of #if DT_NODE_HAS_STATUS(...) #endif
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Refactor the guidelines rule table and add a zephyr rule number
to make it more clear that the coding guideline rules are a
subset of the MISRA-C:2012 rules.
Signed-off-by: Simon Hein <Shein@baumer.com>
Build was failing due to const variable being passed as function param
accepting non-const variable discarding const qualifier. Explicitly cast
to fix the build issue.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The ESAI is already reset during the config_set() function
so no need to also reset it during init().
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The reset pin on the chip is optional, add a soft reset call when the
reset pin is not specified for the device.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Implemented the following:
- `asctime_r()`
- `asctime()`
- `localtime()`
- `localtime_r()`
- `ctime()`
- `ctime_r()`
Specifically:
- the implementation of `localtime()` & `localtime_r()` simply
wraps around the gmtime() & gmtime_r() functions, the
results are always expressed as UTC.
- `ctime()` is equivalent to `asctime(localtime(clock))`, it
inherits the limitation of `localtime()` as well, which only
supports UTC results currently.
Added tests for these newly implemented functions.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
`readdir_r()` belongs to the following option group
POSIX_FILE_SYSTEM_R: Thread-Safe File System
Create a new Kconfig `CONFIG_POSIX_FILE_SYSTEM_R` to compile
it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Add minimum support for the `west sdk` command.
This only provides completion for the `sdk` command itself.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
This command can list and install SDK.
Run 'west sdk install' to install the SDK.
Run without any parameter, installing
specified by SDK_VERSION in the source tree.
'west sdk' to show installed SDK information.
This command is just a wrapper for SDK's setup command,
but it simplifies the installation process. It will be a good
improvement for onboarding first-time users.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Removes calling k_busy_wait() and uses k_msleep().
Updates polling rate of EEPROM busy status after read request to 1 ms, as
recommended by the app note.
Signed-off-by: Jakub Topic <jakub.topic@anitra.cz>
The tests manually include sources that are normally conditionally
included (ie based on kconfig values) in the stack.
The tests should be fixed by the original authors.
For now, force-on the hidden kconfig that enables the log options.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
`OTS_CLIENT=y` and `OTS=n` is a valid config.
Since the logs weren't conditionally included, this flew under the radar
for a while.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
- got rid of "Others" menu
- JK I made a new one: "Common"
- moved all host-related opts to "Host" instead of "Others"
- moved all audio-related opts behind `if BT_AUDIO`
- moved only controller kconfig to controller/Kconfig.ll_sw_split
- it had a dependency there already
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Having all the configs be visible by default clutters the menuconfig
view. Make them visible only when the corresponding subsys or module is
enabled.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Commit 698a0c3193 changed the bluetooth_api
section title, which made the reference in the Coding guidelines turn into
"API", which is confusing.
Use a fixed title for that reference to fix the issue.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
There was hardcoded value for user_data which is no longer valid.
Use proper CONFIG_BT_CONN_TX_USER_DATA_SIZE for that.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v2.6
Requires https://github.com/zephyrproject-rtos/hal_st/pull/21
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Fix warnings generated when performing sensor drivers build test
due to typos in i2c DT definition.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
All the network related shell activities should be under
network shell so moving it to "net bridge ..." command.
Add this information to migration guide.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Remove the references to the breathe extension in the
Schematic of the documentation build process graph and
the filtering expected warnings section.
Signed-off-by: Simon Hein <Shein@baumer.com>
The generated HTML was broken, even though the rst files themselves
contained the correct URLs. Update to a different format which should
generate the right output.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
set high_bandwidth and use the cfg->mps to set
ep_init.maxPacketSize because NXP MCUX controller
driver supports additional transaction bits in
maxPacketSize.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Instead, use the helper to get the size field from the MPS value.
MPS value may contain information about additional transaction
per microframe (bits 12..11).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Make driver aware of High-Bandwidth endpoints both in Completer and
Buffer DMA mode. In Completer mode TxFIFO must be able to hold all
packets for microframe, while in Buffer DMA mode space enough for two
packets is sufficient.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
DMA is capable of packetizing transfers on its own and the driver
doesn't need to check available TxFIFO size when scheduling DMA
transfer.
Split packets on DWORD boundary when writing more than one packet to
TxFIFO in completer mode.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add macros for converting between Max Packet Size and total payload
length. Allow drivers specify whether endpoint supports high-bandwidth
interrupt and high-bandwidth isochronous transfers.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Use COND_CODE_1() instead of UTIL_AND() to make it possible to only
define the HID_MPS_LESS_65_ macros up to value 64.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
wMaxPacketSize in endpoint descriptor is stored in little-endian order,
but the mps parameter passed to functions is in host order.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This adds a kconfig option to force
tx blocking on serial. This way only rx
will use the interrupt.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
To prepare for supporting flexcan, can node should be
renamed to canxl to support both flexcan and canxl
Signed-off-by: Tu Nguyen Van <tu.nguyenvan@nxp.com>
The received messages are put into the FIFO one by one in the
order, the hardware will return the queue index for current
message. So use the index instead of reading always from 0.
Signed-off-by: Ha Duong Quang <ha.duongquang@nxp.com>
