This commit introduces support for an alternate linking method in the
LLEXT subsystem, called "SLID" (short for Symbol Link Identifier),
enabled by the CONFIG_LLEXT_EXPORT_BUILTINS_BY_SLID Kconfig option.
SLID-based linking uses a unique identifier (integer) to identify
exported symbols, instead of using the symbol name as done currently.
This approach provides several benefits:
* linking is faster because the comparison operation to determine
whether we found the correct symbol in the export table is now an
integer compare, instead of a string compare
* binary size is reduced as symbol names can be dropped from the binary
* confidentiality is improved as a side-effect, as symbol names are no
longer present in the binary
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Employs the same linkonce magic of sw_isr_table to fix the
multiple definition of the symtab variables issue that I
get in my application build that doesn't use `west`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Fixes: #73066
Introduce sysbuild_root CMake module similar to the Zephyr root CMake
module. The sysbuild_root CMake module works similar to existing root
module, but with the difference that root paths are adjusted relative to
APP_DIR which is the main image, instead of relative to sysbuild.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Since the introduction of zephyr_file() then the minimum required CMake
version has become 3.20.
Update zephyr_file() to use cmake_path insteasd of set().
This allows us to normalize the path and thereby also remove duplicates
in the list as paths are normalized.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #73065
Update APPLICATION_CONFIG_DIR is Zephyr CMake and sysbuild to follow
the common principle in Zephyr for relative paths.
This means that relative paths are taken from the application source
directory when specified on command line, and require local scoped
defined APPLICATION_CONFIG_DIR to be given as absolute, for example by
using CMAKE_CURRENT_LIST_DIR.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
To build LLEXT images using the xt-clang toolchain from Cadence
linker flags have to be set similar to other toolchains. Add the
missing cmake files.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Remove the deprecated uart_mux and gsm_mux modules and all of
their configurations/dependencies across zephyr.
Optimally uart_mux and gsm_mux would be removed in their own
respective PRs, but the two modules are directly coupled, so
to preserve bisectability, they must be removed together.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Namespaced the generated headers with `zephyr` to prevent
potential conflict with other headers.
Introduce a temporary Kconfig `LEGACY_GENERATED_INCLUDE_PATH`
that is enabled by default. This allows the developers to
continue the use of the old include paths for the time being
until it is deprecated and eventually removed. The Kconfig will
generate a build-time warning message, similar to the
`CONFIG_TIMER_RANDOM_GENERATOR`.
Updated the includes path of in-tree sources accordingly.
Most of the changes here are scripted, check the PR for more
info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Introduce `robot` command for running Robot Framework test suites.
Initial implementation consists of one runner dedicated for renode-test,
which is a Renode wrapper for running Robot tests.
Signed-off-by: Michał Szprejda <mszprejda@antmicro.com>
Introduce `simulate `command for running samples on a simulator of
choice. Initial implementation consists of one runner, dedicated for
Renode.
Signed-off-by: Michał Szprejda <mszprejda@antmicro.com>
Initial integration with renode-test was introduced in commit bdf02ff,
which added support for calling the `renode-test` command from both west
and twister.
This commit removes the custom run_renode_test target used for running
Robot tests with the `west build` command and makes twister call
`renode-test` directly instead.
Signed-off-by: Michał Szprejda <mszprejda@antmicro.com>
Previously the multi-level irq lookup table is generated by
looping through the devicetree nodes using macros & Kconfig,
which is hard to read and flimsy.
This PR shifts the heavy lifting to devicetree & DT macros such
that an interrupt controller driver, which has its info in the
devicetree, can register itself directly with the multi-level
interrupt architecture, which is more straightforward.
The previous auto-generated look up table with macros is now
moved in a file of its own. A new compatibility Kconfig:
`CONFIG_LEGACY_MULTI_LEVEL_TABLE_GENERATION` is added and
enabled by default to compile the legacy look up table for
interrupt controller drivers that aren't updated to support the
new architecture yet.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Fixes: #70258
Specify NO_CMAKE_PATH to prevent CMake find_program from having a
preference for searching CMAKE_PREFIX_PATH.
Some tool like NixOS / Nix package manager sets this variable
to point inside the nix store, like this:
CMAKE_PREFIX_PATH=/nix/store/gpvnsgf8zhqjjgk63dd...-python3-3.11.6-env
thus causing `find_program()` to prefer this over the tool in the
default path.
Support Nix environments by specifying NO_CMAKE_PATH and in addition
support `VIRTUAL_ENV` environment setting for search path when set by
the virtual environment.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
MetaWare toolchain doesn't support building Zephyr with
Picolibc module. This PR fixes biuld process by turning off
picolibc support on compiler side.
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
This test uses pytest to generate an EDK from a simple Zephyr
application, and uses this EDK to build a simple extension, to ensure
that EDK generation is sane.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Instead of hardcoding `autoconf.h` imacro, get the list of imacros from
the llext flags. As those come in the form of absolute paths, they also
need to be massaged to point from the EDK directory without revealing
host complete paths.
Also, the EDK now keeps the imacros on a different flag,
`LLEXT_GENERATED_IMACROS_CFLAGS`, to keep it similar to other generated
includes.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Some flags are common between in tree extensions and out of tree
supported by the EDK. Instead of duplicating those flags, the EDK reuses
the llext ones.
However, as the EDK has its own needs, two new lists,
`LLEXT_EDK_APPEND_FLAGS` and `LLEXT_EDK_REMOVE_FLAGS` are defined to
allow EDK to append or remove flags as needed.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Besides the LLEXT_CFLAGS, which have all that is needed to compile,
generate more granular ones, LLEXT_INCLUDE_CFLAGS,
LLEXT_ALL_INCLUDE_CFLAGS, LLEXT_GENERATED_INCLUDE_CFLAGS and
LLEXT_BASE_CFLAGS. These are done for convenience, as they can help on
different setups, such as unit testing.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
A new Kconfig option which generates syscall stubs assuming that
extensions will always run on userspace, thus simplifying linking
them, as there's no need for z_impl_ stubs (used for direct syscalls),
CONFIG_LLEXT_EDK_USERSPACE_ONLY.
While defining __ZEPHYR_USER__ could have the same effect for optmised
builds, people building extensions on debug environments - thus
non-optimised - would suffer, as they'd need to somehow make the stubs
available (by either exporting the symbol or implementing dummy stubs).
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Loadable extensions need access to Zephyr (and Zephyr application)
includes and some CFLAGS to be properly built. This patch adds a new
target, `llext-edk`, which generates a tar file with those includes and
flags that can be loaded from cmake and make files.
A Zephyr application willing to expose some API to extensions it loads
only need to add the include directories describing such APIs to the
Zephyr ones via zephyr_include_directories() CMake call.
A new Kconfig option, CONFIG_LLEXT_EDK_NAME allows one to control some
aspects of the generated file, which enables some customization - think
of an application called ACME, willing to have a ACME_EXTENSION_KIT or
something.
All EDK Kconfig options are behind CONFIG_LLEXT_EDK, which doesn't
depend on LLEXT directly - so that EDK features can be leveraged by
downstream variations of loadable extensions.
Also, each arch may need different compiler flags for extensions: those
are handled by the `LLEXT_CFLAGS` cmake flag. An example is set for GCC
ARM.
Finally, EDK throughout this patch means Extension Development Kit,
which is a bad name, but at least doesn't conflict with SDK.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
TLS for Arm targets seems to be well supported in clang/lld, so mark it as
supported by the toolchain.
Signed-off-by: Jonathon Penix <jpenix@quicinc.com>
This was previously used as a variable internal to the module, but it
can be used in other places in the build system, which may want a list
of DT-specific includes. Therefore, document it as an output variable.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Changing from `;` to `|` directly doesn't consider for escaped `;`
inside a list. Fix suggested by @pillo79.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
The `cpu.h` is meant to be a hack around Zephyr's dependencies
for unit-test, relocate it to a folder that's included only by
unit-test.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Change the GCC toolchain configuration to make use of the Cortex-R82
target. When Cortex-R82 was added as a GCC toolchain option, the GCC
version of the Zephyr SDK did not support Cortex-R82 tuning. Zephyr was
therefore compiled compiled for the Armv8.4-A architecture. Since Zephyr
SDK 0.15.0 (which updated GCC from 10.3.0 to 12.1.0) coupled with Zephyr
3.2, the Cortex-R82 target is supported.
The Armv8-R AArch64 architecture does not support the EL3 exception level.
EL3 support is therefore made conditional on Armv8-R vs Armv8-A.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
On very early stage build system needs to get access to DTC preprocessor.
MWDT has no it's own preprocessor, so here zephyr-SDK preprocessor is used.
On latest build stages zephyr-SDK objcoby also required as MWDT binutils
don't support all features. This at the same time requires that
ZEPHYR_SDK_INSTALL_DIR must be initialized with valid arch-dependent
prefix.
Zephyr-SDK requires ARCH variable to be initialized before
include "generic.cmake", but in hew HWMv2 model ARCH variable will be
initialized more later. This workaround uses any (first awailable,
independent on ARCH) toolchain from SDK for DTC preprocessing only.
For other build stages ARCMWDT will be used.
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
Currently, clang produces a warning that the '--specs=nosys.specs' argument
is unused. Remove this flag to fix the warning as clang will generally not
honor '--specs' when targeting arm baremetal.
While this flag has been present for some time, I think this should be safe
to do. For background, clang does not seem to handle '--specs' [1] besides
possibly passing it through to GCC if GCC is used as the driver for
linking. However, whether GCC will be used for linking as a fallback
depends on the "Toolchain" [1] clang uses internally, which in turn depends
on the triple. For arm/thumb baremetal triples, the Toolchain clang uses
will not fall back to GCC to drive linking, so '--specs' will never be used
here.
I believe this behavior in clang is fairly longstanding as well (since
~2017/LLVM 5 [2]). While there isn't a minimum required clang version for
Zephyr, Zephyr currently requires lld >= 14.0.0. So, I don't think removing
this flag should impact current users (besides preventing the warning).
[1] https://clang.llvm.org/docs/DriverInternals.html
[2] https://reviews.llvm.org/D33259
Signed-off-by: Jonathon Penix <jpenix@quicinc.com>
This adds supports for flashing images with sysbuild where there
are multiple images per board to prevent using the same command per
image flash which might cause issues if they are not ran just once
per flash per unique board name. A deferred reset feature is also
introduced that prevents a board (or multiple) from being reset if
multiple images are to be flashed until the final one has been
flashed which prevents issues with e.g. security bits being enabled
that then prevent flashing further images.
These options can be set at a board level (in board.yml) or a SoC
level (in soc.yml), if both are present then the board configuration
will be used instead of the SoC, and regex can be used for matching
of partial names which allows for matching specific SoCs or CPU cores
regardless of the board being used
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This commit reverts a breaking change in CMAKE_SYSTEM_NAME introduced by
"Zephyr" back to "Generic") and removes the file
`cmake/modules/Platform/Zephyr`.
Both changes in the aforementioned PR were only introduced to ultimately
modify the value of the global CMake property TARGET_SUPPORTS_SHARED_LIBS
for the special case of building for Xtensa with LLEXT.
The modification of CMAKE_SYSTEM_NAME is considered a breaking change
because it has the potential to alter the build of any non-trivial project
that previously checked for the "Generic" system identifier as
corresponding to Zephyr - for example by doing
`if (CMAKE_SYSTEM_NAME STREQUAL "Generic")`. Such builds may now break in
many ways including silently when there is no `else()` clause with a
`message()` to alert the user that a whole configuration block had been
skipped.
In essence, that CMAKE_SYSTEM_NAME modification was only introduced in
order to have CMake to load `cmake/modules/Platform/Zephyr.cmake` which in
turn adjusted the value of TARGET_SUPPORTS_SHARED_LIBS.
But the use of a CMake platform file like this is ineffective for
non-trivial projects where one or more top level CMake `project()` calls
may happen before the first call to `find_package(Zephyr)` because in such
cases CMAKE_MODULE_PATH will not have been modified yet to contain the
path to <Zephyr_ROOT>/cmake/modules and thus no platform file will be
include by CMake.
This patch moves the conditional override of TARGET_SUPPORTS_SHARED_LIBS
needed by some archs (e.g. Xtensa) into the `kernel.cmake` module which
is known to be the first call to `project()` that enables any language and
thus the one that must come before any artifact target can be defined.
Note commit 64e7d85 added a Kconfig to specify the object type of llext
being built, so it's not tied to the arch anymore but to the
CONFIG_LLEXT_TYPE_ELF_SHAREDLIB option.
Signed-off-by: Nicolas Lebedenco <nicolas@lebedenco.net>
Adds support for SoC overlay files which go in a ``socs`` folder
in application folders and functions similar to the ``boards``
folder, but works for SoCs instead of boards
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds support for a new ``socs`` folder that can be placed in
application folders and functions similar to the ``boards``
folder, but works for SoCs instead of boards
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Some third-party modules uses 'find_package(Threads REQUIRED)' to check
if threads implementation is supported.
The original implementation tries to find threads library using various
methods (e.g. checking if pthread library is present or compiling
example program to check if the implementation is provided by libc), but
it's not able to detect pthread implementation provided by Zephyr.
Signed-off-by: Patryk Duda <patrykd@google.com>
Unlike GNU ld, lld's gp relaxation is disabled by default and must be
explicitly enabled via `--relax-gp`. Pass this flag to enable gp relaxation
for lld when both linker relaxations and gp usage for RISC-V are enabled.
Signed-off-by: Jonathon Penix <jpenix@quicinc.com>
Add a symbol to enable GNU C Extensions. And a hidden option for
toolchains to signal GNU Extensions support.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
USB High-Speed devices must be able to operate at both High-Speed and
Full-Speed. The USB specification allows the device to have different
configurations depending on connection speed. Modify the API to reflect
USB Specification requirements on what can (e.g. configurations) and
what cannot (e.g. VID, PID) be speed dependent.
While the class configurations for different speeds are completely
independent, the actual class instances are shared between operating
speeds (because only one speed can be active at a time). Classes are
free to provide different number of interfaces and/or endpoints for
different speeds. The endpoints are assigned for all operating speeds
during initialization.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
