Add Battery Service along with its characteristics and descriptors
to the database table.
Change-Id: Ifb83ebcb4d6cdafa5df84d643b2e2a69e5a6c1e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Heart Rate Service along with its characteristics and descriptors
to the database table.
Change-Id: Ibff52da7352883edccb7c5b903538a81aad2ba55
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds initial API and definitions to create a database.
Change-Id: I69d5b3f5fd2f04cc309c2f76a84581673aa54e7b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We use addresses in lots of places and with LE we always need to pass
around the type in addition to the address value. Defining dedicated
types for addresses makes the code much simpler.
Change-Id: Ie8b495dce50e3f084685909c19acc5d08e2cca10
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
UUID types don't come from any spec so it is safe to have a enum which
can be changed whenever we want.
Change-Id: I7549f3a487191eeb847a239936f882ff88f4d345
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
UUID defines, etc, will be needed by multiple files including GATT.
Change-Id: I855d3934242f54a8b5bf31652a4f8b9dfb63ef06
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There will be various scenarios where we need to know what the current
encryption mode for a connection is.
Change-Id: I9836ffe51bfb6ebfc09497c7c716bd13a4064305
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add an event handler for LTK requests that looks up the LTK using the
new bt_keys API.
Change-Id: Ifc4e5f96e84026d7e8c68eacb64154dc0a9c72b3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The BLUETOOTH_DEBUG config option bumps the stack sizes to cope with
printf requirements. Since all the logs use printf now they should
only be available with the bigger stack sizes to avoid surprises.
There are still basically two levels of log enabling where
BLUETOOTH_DEBUG enables the ERR/WARN/INFO everywhere and the
BLUETOOTH_DEBUG_* enables BT_DBG for a specific subset of the stack.
Change-Id: Ie8d64e47f44485efde32b40cd5bb34389c8e39da
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
printf() '%x' expects type 'unsigned int' for 'x', but parameter has
pointer type.
Change-Id: Id2d365a32b2e3e711359bd56741370d8167db868
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Including the context ID in debug logs can help track down various
issues, e.g. stack corruption.
Change-Id: I3cd70edd5bfd1d726f6d35e7331afb313cf3cacb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The printf API has a much richer support for various format
specifiers. Switch the Bluetooth logging macros to use printf instead
of printk and make sure STDOUT_CONSOLE gets selected when
BLUETOOTH_DEBUG is selected (so printf actually works).
Change-Id: I9a9818d51a677c6c79a35fef6daca7979f61c78d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The SMP procedures require us to establish a local random number. Use
the HCI_LE_Rand command to generate the necessary 16 bytes (the
command needs to be called twice since it only returns 8 bytes at a
time). Store this number in the SMP context.
To help debugging with various crypto related values add a local h()
helper function for printk/BT_DBG to do hexadecimal conversion.
Change-Id: Id3e8793a77ac635023b3cc3a94e8679170455870
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To make the bt_buf APIs consistent with the recent bt_but_add changes
and more user friendly, change the pull() and push() return values
also to 'void *'.
Change-Id: I25242635c87882db99152735c22316d4de00d363
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Almost all callers of bt_buf_add end up having to do explicit type
casts of the return value since 'uint8_t *' rarely fits what's needed.
Changing the return type to 'void *' removes this extra type casting
need and makes the API friendlier to its users.
Change-Id: I6a79605006153b6d09f0d662a051cb599af68c37
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_buf_pull_le16 convert the initial 16 bits to little endian.
Change-Id: I6f6e9d63fc19b0579d9f445e15e975929fc63ba9
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This commit fixes the issue marked as SPACING by the checkpatch script
deleting the whitespaces between the function name and the open parenthesis.
Change-Id: I972b1646904bf6e1131263f94ab5024a528ae07d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Extend bt_start_advertising to make it possible to add any data type
instead of just the name.
Change-Id: I3f2afe1eb64aec51f321f7fd7439e97b3d67374c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds remaining AD types definitions that can be used in BLE.
Change-Id: Ic9c63a111a5269a53326005012dff955cf399fcf
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Instead of having global command completion handler we can keep the
code more concise by letting bt_hci_cmd_send_sync() give back the
return parameters straight to the caller. This patch extends the
buf->hci.sync variable to not just contain the initial semaphore, but
to have the return parameter bt_buf once the semaphore is given back.
The bt_hci_cmd_send_sync() function receives an extra parameter which
may be NULL if the caller isn't interested in the return parameters.
Change-Id: I41e3e4b1189c4a19d0159947a03fd7052cc98fa9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In certain scenarios we want to keep the buffers around for longer
and avoid the default bt_buf_put() calls from putting them back to the
available buffers queue. This patch adds reference counting for the
buffers, along with a bt_buf_hold() API to increment the reference
count. Now bt_buf_put() will only put the buffer back to the pool if
the reference count hits 0.
Change-Id: I1590c5574e18600939f55e5339a6da3d061f7682
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
BLUETOOTH_DEBUG option enables extensive debug output to serial
console. Disabled by default.
Change-Id: I71a6ca4c4f1dfb5bd818e6b8320a07249befadfb
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Some logs indicate potentially problematic situations but are not
necessarily errors. Since we do want to log these regardless of the
debug setting it's better to have a separate BT_WARN macro for them.
Change-Id: Iad13fc4b58329113458c97b02855033836618f5b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We're already sending 'dummy' buffers to wake up the connection
fibers. The problem is that if we provide a real buffer type it may
have unintended consequences. E.g. with BT_ACL_OUT when bt_buf_put()
is called it may trigger an invalid HCI_Host_Num_Completed_Packets
command.
This patch creates a new BT_DUMMY buffer type to avoid this scenario.
The new type is an alias for BT_CMD since the pool where these buffers
come from is not quota-controlled and synced up with the controller.
Change-Id: I42ac235811dc242345853f7858c10bfc43e4f07d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Every time we put a BT_ACL_IN buffer back to the pool we should report
this to the controller so it knows it can send us more data. This
patch makes the necessary modifications to the bt_buf_put() function
to trigger the HCI command.
The Host Number of Completed Packets command is special in that it
doesn't need to obey the reported ncmd value and also doesn't generate
any command status/complete events. Because of this we need an
exception for it in the bt_hci_cmd_send() function.
Change-Id: If65f28078fd0d81af853447e95bc53822fea75b7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To start supporting controller to host flow control we need to tell
the controller our supported packet count & MTU and send the enabling
HCI command. This patch does the necessary addition to the HCI init
procedure.
Change-Id: I51a66f8cc3a85782a5085f9aae0f4aeb59decad3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To track which ACL handle each buffer belongs to (needed for host flow
control) add the necessary information into a new ACL-specific struct.
Change-Id: Ie6cc7c32a70b43a4ff5954bb9dca34e4f62da292
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To accommodate for ACL user data move the HCI command/event data into
its own struct and put it inside a union in bt_buf.
Change-Id: I680500b15709d14b1e9f70ced88664d607a6568c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to do proper flow control of ACL data to/from the controller
we need to have precise management of the available buffers. Mixing
with the events/commands buffers would make this impossible. This
patch splits the buffer pools into three separate ones:
1. HCI commands/events
2. Incoming ACL data
3. Outgoing ACL data
The total number of available buffers is also increased to match
what's the smallest number supported by current controllers (to avoid
the stack from becoming a bottle neck).
Change-Id: I7e131d61c83a4dda554068d7917c5ee09f2f837d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We may soon want to have a _wait() variant of bt_buf_get, so to avoid
the number of 'get' function growing too large consolidate the
existing get() and get_reserve() functions into a single one. The new
consolidated function also takes the type as input parameter so that
we know this from the very start and thereby plan for the split into
multiple buffer pools.
Change-Id: Ia09448565349def2be9bc08d9510fedd029480b4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll soon want to have dedicated pools for outgoing and incoming ACL
data. To know from which pool to get and put the buffers each buffer
should contain enough information to distinguish the two types. This
patch splits the old BT_ACL type into two new BT_ACL_IN & BT_ACL_OUT
types.
Change-Id: I7d3c05c26d2a70f80fb1229e245aa21673ec378b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The hci.h header file depends on the integer type definitions from
stdint.h and the PACK_STRUCT macro from toolchain.h. This patch adds
those so that users of hci.h don't need to be concerned of this
detail.
Change-Id: Ib1856cdec75a3bab1b86bc832cdec6ad0461db6d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The buffer handling code is quite large and will continue to grow. As
it's not strictly HCI core material it's better to just manage it in a
separate file. This patch moves the code to include/bluetooth/buf.h
and net/bluetooth/buf.c.
Change-Id: Ie1ff79ac2cfa132359ce9f7674ff812d34b228aa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds a simple event handler for the LE Disconnection
Complete HCI event. An extra thing the handler needs to do is to
re-enable advertising if necessary, since it will have been implicitly
disabled by the controller upon a connection event.
Change-Id: Ie6f2eecb8c1d7de16fea24c8fd1533545f41baa5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds a basic event handler for the LE Connection Complete
HCI event.
Change-Id: Iea099fe1b8c87fcd00d13e8793ebce8ced7adec6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All LE related HCI events come wrapped in a LE Meta 'super' event.
This patch adds a basic event handler for it.
Change-Id: I4a037d4af080c3ba0f982586065c0c49b6cf7640
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We shouldn't be sending more ACL packets to the controller than it
is capable of accepting. This patch adds a semaphore to track the
number of available controller-side ACL buffers.
Change-Id: Ib280afa06aade68eee03e44e33624eebb700dad5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds a simple API for enabling advertising and specifying
the friendly name in the advertising data. The API is probably not a
final one but fulfills the initial need to create apps that are able
to act in the LE peripheral role.
Change-Id: I3ff7e72ece377d872ef1b0e4ad44aeb293cc13e5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To manage LE advertising we need basic HCI definitions for the
commands and events involved. This patch adds those to the hci.h
header file.
Change-Id: Ic6cf17369ad09d97ca5c098f25ba786d265d0bfd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds a full HCI initialization routine to retrieve all
relevant information from the controller.
We also need to introduce a new blocking bt_hci_cmd_send_sync() API
since some commands are conditional to the results of others. The API
is implemented with the help of a semaphore that's part of the
command's bt_buf struct. We wait on the semaphore and get it back once
the command has completed (with the help of the hci_cmd_done
function).
The patch also adds variables for storing various controller specific
parameters which will be needed later during the operation of the
stack. These variables are part of 'struct bt_dev' and get updated
through the respective command complete handlers.
A new bt_hci_reset() API is added which allows an application to reset
the controller state at any time by re-running the HCI init procedure.
Change-Id: I5b1a38e910d79ad5fe806467bc51388eedc9c8f9
Co-authored-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds a basic HCI driver registration API along with a fiber
to process data from the driver. A FIFO is used for receiving data
from the driver and waking up the respective fiber. To open and set up
the HCI transport for operation there's an open() callback passed to
the HCI core. This function will be called as soon as an application
initializes Bluetooth functionality through bt_init().
Change-Id: I780cca517a0dfc714f1ca35527e1c61e307345a0
Co-authored-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to manage incoming and outgoing HCI data (events, commands &
ACL data packets) we need to have some way of storing this into
buffers. This patch implements a 'pool' of buffers with the help of
the nano_fifo API. The pool is initially populated with all available
buffers. After this code can on demand request buffers from the pool
with the help of bt_buf_get() and return buffers back into the pool
with bt_buf_put().
Since we don't always know the execution context from where the API is
operated on, this patch also adds convenience fifo_get/fifo_put
wrappers that look up the exact context before calling the correct
nano_fifo API.
Change-Id: Ie7f6d450de865273171e21a000d5a14274d27d32
Co-authored-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For performing a basic HCI initialization procedure we need
definitions for the related HCI commands and events. This patch adds
these into separate hci.h header file. More content will be added to
this file as corresponding functionality gets added to other areas of
the stack.
Change-Id: Ida7555cb0a3d30b8a44324cb14699eba8a1bcdee
Co-authored-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To introduce the Bluetooth stack to the tree we need some additions to
the configuration options, as well as the very basic header files. The
patch also adds a skeleton for a bt_init() function that applications
will need to call to initialize Bluetooth functionality.
Change-Id: Ideb24dfea584b71f514e05eb47654b659776133e
Co-authored-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
