This adds bt_l2cap_chan_send which can be used to send data to
dynamic channels resulting in the following trace:
< ACL Data TX: Handle 3585 flags 0x01 dlen 17
Channel: 64 len 24 [PSM 128 mode 0] {chan 5}
a0 02 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
ff ff ff ff ff ff ff ff ........
Change-Id: I753e301b1125ef21a345ab96470f15bc53a4869a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allows to request user to confirm displayed passkey with remote
device. This allows to have authenticated LE SC link resulting in FIPS
security level.
Change-Id: I5b6c1666e3d1687cc04c5d66529372db090dd000
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This will be used to determine if controller supports
"LE Read Local P-256 Public Key" and LE Generate DH Key" commands.
Change-Id: Ib2bf7cfa99a20c07af0d3043ac9f9c2e0a6c2fcb
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
"LE Read Local P-256 Public Key" and LE Generate DH Key" commands
are used for LE Secure Connections pairing. "LE Set Event Mask"
is used to unmask events generated by those commands.
Change-Id: I601c8e21093ed2170dfe8e5618b34493268fe68d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to disable events not required by application. In future
this can be extended to enable events that are not enabled by default.
< HCI Command: LE Set Event Mask (0x08|0x0001) plen 8 24.018392
Mask: 0x000000000000001f
LE Connection Complete
LE Advertising Report
LE Connection Update Complete
LE Read Remote Used Features Complete
LE Long Term Key Request
> HCI Event: Command Complete (0x0e) plen 4 24.019215
LE Set Event Mask (0x08|0x0001) ncmd 1
Status: Success (0x00)
Change-Id: I29bfaa0743ac9e604a637f51503ff28a9b2074c2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
With this patch application can unsubscribe notifications
from Subscribe value callback directly, if BT_GATT_ITER_STOP
is returned.
Change-Id: I7873594f5dbe6e8c5bef11bf397a74cdc870a464
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch refactor reading of attribute values as a client.
Current MTU size is taken into account to determine if read
procedure has been completed or not.
For now, read procedure will be continued until whole is read,
or stopped by client.
Core Specification says that "The Read Blob Request is repeated
until the Read Blob Response’s Part Attribute Value parameter is
shorter than (ATT_MTU – 1)." (Vol 3, Part G 4.8.3)
Because application didn't know the current MTU value,
there was no way to determine if data received is complete.
Change-Id: I9d0e3f8638b58c3a4e39060333aedc133b775e3d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds bt_l2cap_chan_disconnect which can be used to disconnect
dynamic channels resulting in the following trace:
< ACL Data TX: Handle 3585 flags 0x00 dlen 12
LE L2CAP: Disconnection Request (0x06) ident 2 len 4
Destination CID: 64
Source CID: 64
> ACL Data RX: Handle 3585 flags 0x02 dlen 12
LE L2CAP: Disconnection Response (0x07) ident 2 len 4
Destination CID: 64
Source CID: 64
Change-Id: I77ec29c8879a330b7f73e217621436045fa5163e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_l2cap_chan_connect which can be used to connect dynamic
channels resulting in the following trace:
< ACL Data TX: Handle 3585 flags 0x00 dlen 18
LE L2CAP: LE Connection Request (0x14) ident 1 len 10
PSM: 128 (0x0080)
Source CID: 64
MTU: 63
MPS: 65
Credits: 4
> ACL Data RX: Handle 3585 flags 0x02 dlen 18
LE L2CAP: LE Connection Response (0x15) ident 1 len 10
Destination CID: 64
MTU: 672
MPS: 230
Credits: 10
Result: Connection successful (0x0000)
Change-Id: I73b2bd62fdca4a3ffa35577f0b66c2e6bb0083cd
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This doesn't need to be exposed in the public API.
Change-Id: Ib6d4336684620bd1e03d128765f289b5ebd744ef
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With this split we get better control of the buffer sizes and counts.
We also anyway will need a fragments pool so a simple generic ACL_OUT
pool doesn't make sense anymore. The related Kconfig options for that
have been removed.
Change-Id: I616cf49915a1cc0dc0ddc724e2e182bcbe0c80f6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We know the needed values at build-time, so there's no point in having
a runtime mechanism of accessing them in the code. Having the values
as defines makes it e.g. possible to use them as input for defining
the size of buffer pools.
Change-Id: Ib7556644719bfb631e638fa5bf29f3d1747a5072
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds bt_conn_enc_key_size function which will be used
by application to check encryption keys size of a encrypted connection.
This will be used especialy by GATT applications, because some
attributes to be accessed require encryption with specified
minimum encryption key length.
> ACL Data RX: Handle 64 flags 0x02 dlen 7 [hci0] 708547.536685
ATT: Read Request (0x0a) len 2
Handle: 0x0003
< ACL Data TX: Handle 64 flags 0x00 dlen 9 [hci0] 708547.544302
ATT: Error Response (0x01) len 4
Read Request (0x0a)
Handle: 0x0003
Error: Insufficient Encryption Key Size (0x0c)
Change-Id: Idbc9afde7ec80504898bd8d1e193f3e71a93f3f9
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This removes some outdated comments, adds missing ones
and fixes some major typos.
Change-Id: I3e6c0c1b88c67852fc8c24eb2ff35d74af8bc656
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Fix format of bt_l2cap_server_register documentation.
Change-Id: I22322a235bb1d6b6752bfe13ce8e305481649125
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
These make the code more readable when it comes to encoding and
decoding ACL handle values.
Change-Id: Ibd1972d6001c6c0c55428300f839b288dff1ce52
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The space that the HCI driver needs to reserve for its own use is not
necessarily symmetrical. E.g. even with the current H4 driver we only
need to reserve space for sending data but not for receiving it.
Keeping track of these values independently enables more efficient use
of the buffers.
Change-Id: I64917b545c5cd77356ed038d09afe76422334661
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that we have the buffer type enum as part of the HCI driver API we
can take advantage of it to pass the buffer type information and not
have to have two separate callbacks.
Change-Id: Ib2ee5b1540e532c9b27903e97660a276c1293fbc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since the buffer type is essentially a HCI driver - HCI core
communication detail the appropriate place for it is driver.h. At the
same time remove the unnecessary and slightly confusing BT_DUMMY type.
Change-Id: Ic813ad24d8f0530d3779006063ea21b010d29cf6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no need to maintain a separate module for this anymore.
Subsequent patches will have further simplifications thanks to this
being now handled in a single c-file.
Change-Id: I4510c9f72b121e1e5fd19eeb8b5d5ddf2f4bfffe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way we avoid dealing with the specific buffer type value and to
make it clear that these are for drivers onle.
Change-Id: I8aef7ec6a767b2fa68cbe374eb371e2a6192f675
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is a necessary step in preparation for removing the buffer type
information from the buffers.
Change-Id: I29d8fae32aa660416a1c12e87840499c711e659f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To avoid unnecessary stack variables and to simplify code, add helper
macros to access the Bluetooth specific ACL and HCI user data that's
part of the buffers.
Change-Id: Idc337537721115c4091982c04f8a05bbbf0d5a19
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that all code is converted remove the temporary helpers for the
old bt_buf API.
Change-Id: I5183add527d204c51103549fda3378040d5f8f68
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert the code to use the net_buf API instead of the soon to be
removed bt_buf API.
Change-Id: I5f376caeb861ac8b815a0a2e235bd188b9e8185b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert the code to use the net_buf API instead of the soon to be
removed bt_buf API.
Change-Id: I226de212d4f8d4f5b613708ffe42570443bc2182
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch performs the minimal necessary conversion to the net_buf
API. It uses a temporary "#define bt_buf net_buf" to make it possible
to convert the code in smaller increments. Most old bt_buf function
also serve as one-line wrappers to the matching net_buf APIs. Once
everything is converted these helpers will be removed.
Change-Id: Ie31433d33576022c9c193a35d2389267005545d6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes BT_GATT_CHARACTERISTIC declare a local bt_gatt_chrc so the
applications don't need to declare themselves.
Change-Id: Icf3fad7dffea5667c6f13aa022a5722900da51e8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The spec says it should always be the very first descriptor after the
characteristic:
"BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part G] page 534:
3.3.2 Characteristic Value Declaration
The Characteristic Value declaration contains the value of the
characteristic. It is the first Attribute after the characteristic
declaration. All characteristic definitions shall have a
Characteristic Value declaration."
Change-Id: I6c38dea9cc4c1a05997edbd348e2759680472725
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
value_handle is not used for anything.
Change-Id: I3885d221b162eb3bd44956af64280baf61dc001b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_gatt_register will assign a handle if not initialized and removing
the handle makes it simpler to change the attributes since it is no
longer possible to have conflicting handles.
Change-Id: I787f7325cc990c360056b1aefd07bb7d7876b445
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allow calling bt_gatt_register multiple times so different tasks
can add their own services separately.
Change-Id: I8143ddedfa1079087d608013d1a97b552a3007dc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We want to make the naming convention ref/unref rather than get/put.
So far the only reference counted objects are the buffers and the
connections. For the buffers the new generic buffer API will also use
ref/unref.
Change-Id: I9fe8b8a6a50a8baf06ba231e8f6717a5a47dd292
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_uuid_to_str uuid param is const therefore bt_uuid_str should be const
as well.
Change-Id: I043d66d16c863ed92e60477dbbb9c37bcde92703
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This make use of bt_uuid_to_str to when printing UUID values, to make it
simpler when it is just going to print so the patch introduces a new
function that does the conversion in place using a static variable.
Change-Id: Idfedf05a5ad201653fff2e01387f046cd5647c83
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allow sending direct notification to a specific peer without
using CCC which is allowed by the spec:
BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part F page 507
3.4.7.1 Handle Value Notification
A server can send a notification of an attribute’s value at any time.
Change-Id: Ieff29216cb9ba197c0da92d7b22b26e63101cfa8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For limited discoverable mode, we need to have a define
for this advertisement flag.
Change-Id: I774b68546983697844eca2644b0ca0a85b8026e8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds an option to enable L2CAP dynamic channel support, fixed
channels are not affected by it.
Change-Id: If36bece46b7b94142ea1ac976b878d1b5ae6a578
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This split L2CAP API so that server API is available to applications
while the rest of the API is keep internal to the stack.
Change-Id: I031926ff906ce100684fba0947b2e9eb2c8fcaeb
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Depending on selected Kconfig options some parts of public API
are disabled with #ifdefs. This should make it easy for user to
figure out which options should be enabled to specific API.
Change-Id: I4ae1bfd7bf535ea45869772c429ccd3d3d4c214e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Add discover type to bt_gatt_discover_params to the API is reduced to
just bt_gatt_discover, this should simplify adding support for
discovering secondary and included services.
Change-Id: Iadeed86fed115afee1340b2c09821d7fafdda0f4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables bt_gatt_subscribe to subscribe using indication value in
addition to notification.
Change-Id: I25f3b057e36b023a79fb66b11b70716ecc299ba9
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move parts of the API that are not usable for applications to
an internal header.
Change-Id: Idbcd3db8acda74375ea9deec2bf3d7eddc8a4ddb
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds bt_buf_clone which can be used to duplicate a buffer, including
its contents.
Change-Id: I473841e1fce00fddbfac1fb2c55d40741658484f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pass service handles to the callback during service discovery.
Change-Id: I616de5188faf76c84cc02ceb29a6f5aab631b89c
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Adds HCI layer event defines to be used by LE Connection Update
Complete event handler.
Change-Id: I5c3502054acd4f838a33c55df8d1eefe1acec6b4
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
