Add struct ll_df_conn_rx_params sturcutre to struct lll_conn.
This is storage for parametrers required to configure radio
for CTE reception in connected mode by lower link layer.
Add required includes to make the controller code compilable
after change struct ll_conn.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
In the time between a NODE_RX_TYPE_CONNECTION node is sent from LLL and
demuxed in ULL, an ADV role disable may be executed.
This makes the LLL data referenced in the node NULL/invald, and
ull_conn_setup would operate on invalid data.
This commit introduces a check in ADV disable to disallow the operation
(including conn invalidation), if a connection has been initiated.
To prevent pipeline-queued prepares from advertising after disable has
been initiated, set 'cancelled' flag for immediate signalling to LLL.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix race conditional when create connection cancel is called
and actually a connection did get setup while initiator is
being stopped.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the initiated bit flag into role specific union, so that
other role specific bit flags can share bit space in the LLL
context structure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use an "initiated" flag in the lll_conn struct to guard the processing
of PDUs related to connection initiation (CONNECT_IND,
AUX_CONNECT_RSP). This avoids races between ULL and LLL when creating
a connection.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Refactor out clock ppm interface so that it can be reused
for Periodic Advertising Sync feature.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added automatic runtime calculation of Forced MD bit count
based on incoming Tx buffer throughput.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor to reuse common repeated code in ISR that reset
status, and performed abort, done and cleanup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Split BT_CTLR_CONN_RSSI option into two, the base option enables the
Read RSSI command, while the new BT_CTLR_CONN_RSSI_EVENT enables the
connection RSSI events. There is no handling of RSSI events, only a
BT_INFO log.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Updated the lll_conn_flush interface to pass the connection
handle while the LLL connection context stored handle has
been invalidated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit targets solving issue #17731 over the LL_SW_SPLIT
arch of the BLE stack in Zephyr. This functionality is exposed
to the user as HCI Zephyr Command extensions
- BT_HCI_OP_VS_WRITE_TX_POWER_LEVEL
- BT_HCI_OP_VS_READ_TX_POWER_LEVEL
which enable Tx power read/write operations within BLE radio events
on a per role/connection basis.
The functionality is enabled upon the Kconfig advanced configuration
triggered by
- BT_CTLR_TX_PWR_DYNAMIC_CONTROL
depending on the enablement of Zephyr HCI vendor-specific command
extensions.
Necessary low-level radio HAL functionality and power definitions
are also supplied to address the high-level functionality of
controlling the Tx power.
Signed-off-by: Andrei Stoica <stoica.razvan.andrei@gmail.com>
Fix implementation to correctly cache the control procedures
initiatable by local and peer. And, fix feature exchange and
version information procedures from being disallowed by
having then as cached requests to the controller.
Relates to #15256 and commit 0dcfa3853782 ("Bluetooth:
controller: Fix cmd disallowed and collision disconnects").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the LLL connection context to move out the member
fields not accessed in LLL execution context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move calculation of max_tx_octets from Nordic lll_conn.c to ULL, to
allow usage by other vendors and prevent duplicate code.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Added support for vendor specific meta data in LLL conn object. This
enables vendors to add state data to connection, for supporting
specialized BLE slave features.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Ported implementation of Data Length Update Procedure to
ULL/LLL architecture of the Link Layer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a squash merge of commits introducing the new split
Upper Link Layer and Lower Link Layer architecture of the
Bluetooth Low Energy controller.
This introduces a new, improved Link Layer based on the
concept of split responsibilities; The Upper Link Layer
(ULL) is in charge of control procedures, inter-event
scheduling and overall role management. The code for the
ULL is shared among all hardware implementations. The
Lower Link Layer (LLL) is responsible for the intra-event
scheduling and vendor specific radio hardware access.
The communication between ULL and LLL is achieved through
a set of FIFOs that contain both control and data packets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Wolfgang Puffitsch <wopu@oticon.com>
Signed-off-by: Morten Priess <mtpr@oticon.com>
Preparation to introduce the Upper Link Layer (ULL) and
Lower Link Layer (LLL) split architecture.
- Move SoC dependent HAL to vendor specific folder.
- Preparation to split data structures into ULL and LLL
types.
- Added more role and state conditional compilations.
- Added some work-in-progress implementation of advertising
extensions, will be used as inspiration in the new split
architecture work.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
