Split up requirements.txt into several files so that CI tools can
utilize/reference the specific requirements-<FOO>.txt they may need
while keep things in sync with the development. This is to reduce
both time and amount of work CI actions due to python package install.
Create the following groupings:
1. BASE - needed to build or create zephyr images
2. BUILD-TEST - need to run compile/build tests
3. DOC - need to build the docs
4. RUN-TEST - need for runtime testing
5. EXTRAS - optional or useful for development/developers workflow
Also tried to add a comment about what or why a given package is being
pulled in for.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This never needed to be put in a separate gperf table.
Privilege mode stacks can be generated by the main
gen_kobject_list.py logic, which we do here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Private type, internal to the kernel, not directly associated
with any k_object_* APIs. Is the return value of z_object_find().
Rename to struct z_object.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rather than stuffing various values in a uintptr_t based on
type using casts, use a union for this instead.
No functional difference, but the semantics of the data member
are now much clearer to the casual observer since it is now
formally defined by this union.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
add lstrip function to delete the '\r' char in front of the
serial output from serail readline, because this '\r'
will influence the result match function in harness.py.
Signed-off-by: peng1 chen <peng1.chen@intel.com>
The README file was in need of clarification how to set up the
net-tools Docker image and how the IP addresses were assigned.
mqtt_publisher is also mentioned.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
With net-tools and the mqtt_publisher sample updated, add support
for running the sample with the network sample test script.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
This change removes the hardcoded subsystem list in gen_kobject_list.py
favor of marking the relevant driver API structs with the _subsystem
sentinel.
Signed-off-by: Corey Wharton <coreyw7@fb.com>
This change extends the parse_syscalls.py script to scan for a
__subsystem sentinal added to driver api declarations. It thens
generates a list that is passed into gen_kobject_list.py to extend
the subsystems list. This allows subsystems to be declared in the
code instead of a separate python list and provides a mechanism for
defining out-of-tree subsystems.
Signed-off-by: Corey Wharton <coreyw7@fb.com>
Add a function takes a 'label' and returns "y" if we find an
"enabled" node that has a 'nodelabel' of 'label' in the EDT
otherwise we return "n"
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Pad node identifiers to 60 characters. This results in better
alignment in practice than the current value of 40, which is a bit
low.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This too is an attempt to reimplement the previous behavior exactly,
modulo the order in which things are defined.
This is the last function which is calling into the previous
implementation's out_node and node_*_alias() functions, so these can
be removed now.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is similar to the work already done for regs.
Other than the order in which they appear and comments, the output
before and after this patch should be exactly the same.
We're intentionally leaving some of the helpers in module scope here
to use some of the subroutines elsewhere later on when reworking
write_spi_dev().
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Mirror the change already done to write_regs().
Other than the order in which they appear and comments, the output
before and after this patch should be exactly the same.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use augmented nodes to print macros grouped by namespace.
Other than the order in which they appear and comments, the output
before and after this patch should be exactly the same.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Group the macros together by namespace rather than putting all the
BASE_ADDRESS macros together and all the SIZE macros together. E.g.,
all the DT_INST_<x> namespace macros for each node now appear
consecutively.
Add a comment making it clear that this output comes from "regs",
since "BASE_ADDRESS" and "SIZE" are not property names.
Other than the order in which they appear and comments, the output
before and after this patch should be exactly the same.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add additional attributes to each edtlib.Node we process, before
calling into the write_foo() routines.
This includes the identifier returned by node_ident(), which is used
as the primary identifier for the node, as well as lists for instance
and aliases nodes, and a catchall list that contains all the other
identifiers in addition to the primary one.
Use this information in a new for_each_ident(node, ident) def that
will be put to use in the various write_foo() routines.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
spi_dev_cs_gpio() takes a Node and returns the chip select GPIO for it.
Having that information available directly from Node is neater, so turn
it into a Node.spi_cs_gpio property instead.
That gets rid of the only public global function in edtlib, which might
make the API design clearer too.
Tested with the sensortile_box board, which uses SPI chip select.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
It's better to allow per-instance EDT configuration than to set a global
variable on the edtlib module. Enable/disable the warning for reg/unit
address mismatches via a flag to EDT.__init__(), instead of via a global
variable. That makes it consistent too.
Another option would be to pass the 'dtc' flags to EDT.__init__(), but
it makes the interface a bit ugly. Maybe if it needs to emulate lots of
other flags later.
Clarify that edtlib itself isn't meant to have any state in the comment
at the top of the module.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Enhance error reporting by returning immediately when the calling
function reports an error.
Signed-off-by: Andrei Laperie <andrei.laperie@intel.com>
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Return the final return value from Docker script when running echo
client in the container, first for UDP and then TCP, for both IPv4
and IPv6.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The header printed at the beginning of every west build is kind of
annoying. Let's remove it and just print the application source
directory at cmake time instead. The build directory and board are
already printed there, anyway, and that's all IDE users will see.
Let's clean up the BOARD to make it say "board" instead. That matches
the west build --board option name a bit more closely and is still
legible.
Likewise, let's not print any west build messages if we're just
incrementally recompiling. That's noisy.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
When checking build directory against cache on windows, certain
corner cases can end up failing the comparison because of case
difference on an otherwise identical path. This can be avoided
by ignoring case on windows.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
The 'command' command line argument for this flasher is now being
overridden by common code, which attaches the west subcommand name to
this.
Let's just hotfix this by renaming the argument in misc-flasher.
We can revisit the boundary between run_common.py arguments and
runners package arguments after the release.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Try to make it clearer what's going on here.
Suggested-by: Lucian Copeland <hierophect@gmail.com>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is yet another bug introduced by the move to runners.yaml.
Sigh. I should have tested this better.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This will also make the reason for a following bug fix easier to see.
Update a comment block to include all the work that needs doing.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This makes its true value clearer, and will make a later bug fix patch
easier to understand.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Due to cleanups in west targeted at getting rid of zephyr-specific
code, extension commands can no longer rely on ZEPHYR_BASE being set
in the calling environment at import time (it's still set at run()
time for now, though, to keep west build working).
Add a new helper to make dealing with this easier from west sign.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Refactor the code to support the new runners.yaml file created by the
build system.
Compared to fishing around in the CMake cache, this makes it trivial
to put all the command line arguments to a runner-based command on
equal footing, regardless of if they're defined in the runners package
proper or defined in run_common.py.
This allows board.cmake files to do things like this:
board_set_runner_args(foo
--bin-file=${PROJECT_BINARY_DIR}/my-signed.bin)
While at it, make some other cleanups:
- Stop using the obsolete and deprecated west.cmake module while we're
here in favor of the zcmake.py module which was added to Zephyr a long
time ago. Yikes. I had forgotten this was still here.
- Stop using west.util's wrap function in favor of raw use of
textwrap. The west function splits on hyphens, which is breaking
runner names like "em-starterkit".
- Clean up the --context output a bit
Fixes: #22563
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
