For all STM32 series, add some defines to select the RTC clock source.
This change is necessary to be able to select the RTC clock source in
dts instead of Kconfig
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
This add TFM cmake definitions to build mass storage sample for non
secure firmware boards versions. The stm32l562e_dk_ns board was used
to demonstrate. It uses SDMMC/SD with TFM profile large. Tests were
conducted using a 2GB transflash card with FAT-32 partition.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
This enables usb and usb_device tag for tests. It explicitly disable
samples/subsys/usb/dfu for non-secure version of this board due to
building errors, which can be explored in future.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Adds a note on changes needed to applications to update them for
changes introduced into MCUmgr.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
After a soft-reset of the host controller the flash device is not reset.
This can cause the flash device to still be busy writing or erasing when
the host controller boots and initializes the flash. The often results
in errors and the flash device not being initialized.
This fix polls the status register until the WIP flag is off before
initializing the flash device.
Fixes#51713
Signed-off-by: Gregers Gram Rygg <gregers.gram.rygg@nordicsemi.no>
Adds a test which checks that the fs_mgmt supported hash/checksum
functionality is working and returns the expected response.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a new mcumgr command for returning information on all supported
hash/checksum types that the firmware supports.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This fixes issues with the Bluetooth SMP transport whereby deadlocks
could arise from connection references being held in long-lasting
mcumgr command processing functions.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This replaces an intermediatory structure with a different one which
allows command functions to access the full contents of the streamer
structure that would be otherwise unavailable. This is a foundation
for allowing asynchronous mcumgr messages from the server.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
In order to configure domain clock, clock_control_configure should be
used instead of clock_control_on which is only useful for bus clock gating.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
When it needs to access perck clock speed, clock_control driver is using
LL API to read RCC registers and compute frequency.
We're using the exact same method to test the frequency and as a result
we were not able to detect that there was an issue when configuring this
clock.
Add a specific case to this test in order to verify perck domain clock if
perck is used in SPI clk configuration.
We're now able to detect issues (and test is failing).
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Perform some rework in messages displayed in case of failure to ease
readability:
- remove redundant information
- add missing information
- convert registers values to hex
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Test was using "clock-names" property to query domain clock configuration.
This is not working since clock-names was removed in the last step of the
feature implementation and whole macro was always reporting DT_NO_CLOCK.
This issue went undetected because of an additional issue in the exception
case which was testing "zassert_true(1, .." instead of "zassert_true(0, .".
Fix both issues to make the test efficient again.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
-- Handle time calculations across the point at which the controller's
time information from the controller's clock will wrap (in the
microsecond range)
-- Use wrapped time in all ISO-AL time calculations
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Add to the cryptographic toolbox the h8 function, defined in the Bluetooth
Core Vol. 6, part E 1.1.1.
Also add test and SMP self test for this function. The data used for those
are from the Bluetooth Core.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Move functions defined in the Cryptographic toolbox of the Bluetooth
specification inside their own files in the following folder:
`zephyr/subsys/bluetooth/bt_crypto`. The functions were previously
implemented in `zephyr/subsys/bluetooth/host/smp.c`.
The cryptographic toolbox functions can now be accessed from outside of the
host.
In addition to that, tests for each cryptographic toolbox functions have
been added.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The pointers to resource values should not be used
directly to update the values.
This will break observations if the server is trying to
observe changes during a software update.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Fixed how data is read in mcp23sxx_read_port_regs
The data is now stored in an array to get the
actual data from spi
Signed-off-by: Daniel Skatt <daniel.skatt@gmail.com>
Fixes for the following issues that a new version of mypy started
reporting recently:
runners/trace32.py:34: error: Incompatible default for argument
"startup_args" (default has type "None", argument has type
"List[str]") [assignment]
runners/trace32.py:137: error: Incompatible default for argument
"cfg" (default has type "None", argument has type "Path") [assignment]
runners/trace32.py:34: note: PEP 484 prohibits implicit Optional.
Accordingly, mypy has changed its default to no_implicit_optional=True
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Channel SENSOR_CHAN_GAUGE_FULL_CHARGE_CAPACITY was returned in place of
SENSOR_CHAN_GAUGE_FULL_AVAIL_CAPACITY, due to their matching names.
Ensuring that the channel names are unique fixes the issue.
Signed-off-by: Marco Argiolas <marco.argiolas@ftpsolutions.com.au>
"alh0: alh1:" will create only one instance and this needs to be
reverted to original form with two instances
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
This commit removes the `mps2_an521_remote` board from the integration
platform list of the CMSIS-DSP transform tests because this board no
longer has a sufficient code memory (FLASH) to fit these tests after
the resizing done in the PR #52052 for TF-M compatibility.
Consider adding `mps2_an386` as an integration platform for these tests
once the support for it is added to Zephyr (refer to the issue #45319).
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
As the power domain nodes don't represent something accessible via
a MMIO register move those under the lps node to address warnings
generated when building the DTS.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
CC setting algorithm is handling a case when CC is too soon (next
tick from now). It was setting CC to one tick further in the future
if that was detected. Step was repeated if counter incremented during
setting CC and CC was behind the counter because of risk of setting
CC too late. In certain scenarios we might spend a lot of time in
that loop, especially if optimization is turned off. Test shown that
loop was executed dozens of time (up. to 700us). To prevent
prolonged execution whenever CC setting fails we set CC to one more
tick further in future.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When a BIS disconnected, we removed the references between
the endpoint and the stream. This made it impossible
to later unbind the audio_iso when
broadcast_sink_cleanup_streams was called.
Fixed by unbind the audio_iso when we remove the reference.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Test assumes that system clock is slow enough so 1 tick timeout
will not expire before k_timer_start function exists. That is
not the case when system clock is fast (relatively to the cpu
clock). Increase the timeout and add synchronization point.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Use spisc_it8xxx2_regs instead of IT83XX_SPI_*** registers declaration
to fix in cros_shi_it8xxx2.c
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Adds a note on how to disable TrustZone on the board, to be able to
reflash non TrustZone samples. Without this step, flashing will fail
for non TF-M or TrustZone sample applications.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
